Philips GC9600 SERIES Bedienungsanleitung

4239 001 10721

GC9600 series

User manual Mode d’emploi

321

IMPORTANT: Perform descaling regularly for great steam and

prolonged life.

IMPORTANT : eectuez régulièrement un détartrage pour une

vapeur de qualité et une durée de vie prolongée.

CALC

FRANÇAIS 21

Problème Cause possible Solution

L’appareil contient trop de

calcaire/minéraux.

Détartrez régulièrement l’appareil

(voir le chapitre « Important -

DÉTARTRAGE »).

Le fer laisse un

voile ou une

marque sur le

vêtement.

La surface à repasser était

non plane, par exemple

parce que vous repassiez sur

une couture ou un pli dans

le vêtement.

PerfectCare peut être utilisé sur tous

les vêtements. Le voile ou la marque

n’est pas permanent(e) et partira si

vous lavez le vêtement. Évitez de

repasser sur les coutures ou plis, ou

placez un chion en coton sur la zone

à repasser an d’éviter des marques

sur les coutures et plis.

L’appareil ne

produit pas de

vapeur.

Il n’y a pas assez d’eau dans

le réservoir d’eau (le voyant

« réservoir d’eau vide »

clignote).

Remplissez le réservoir d’eau (voir le

chapitre « Utilisation de l’appareil »,

section « Remplissage du réservoir »).

Le fer n’a pas susamment

chaué pour produire de la

vapeur.

Attendez jusqu’à ce que le voyant

« Fer prêt » du fer reste allumé.

Vous n’avez pas appuyé sur

la gâchette vapeur.

Maintenez la gâchette vapeur

enfoncée lorsque vous repassez.

Le réservoir d’eau n’est pas

correctement inséré dans

l’appareil.

Repositionnez le réservoir d’eau dans

l’appareil (clic).

L’appareil n’est pas allumé. Branchez la che sur la prise secteur

et appuyez sur le bouton marche/

arrêt pour allumer l’appareil.

L’appareil

s’est éteint. Le

voyant dans

le bouton

marche-arrêt

clignote.

La fonction d’arrêt

automatique est

automatiquement activée

lorsque l’appareil n’a pas

été utilisé pendant plus de

10 minutes.

Appuyez sur le bouton marche/arrêt

pour allumer à nouveau l’appareil.

Le fer produit

un bruit de

pompe.

L’eau est aspirée dans le

réservoir de l’appareil. Ce

phénomène est normal.

Si le bruit de pompe continue

sans arrêt, éteignez l’appareil et

débranchez la prise d’alimentation.

Contactez un Centre Service Agréé

Philips.

GC9600 series

ENGLISH 6

FRANÇAIS 14

Introduction

This iron has been approved by The Woolmark Company

Pty Ltd for the ironing of wool only products provided that

the garments are ironed according to the instructions on the

garment label and those issued by the manufacturer of this

iron. R1501. In United Kingdom, Eire, HongKong and India, the

Woolmark trademark is a Certication trademark.

Product overview (Fig. 3)

1 Steam supply hose

2 Iron platform

3 First supply hose storage compartment

4 Mains cord with plug

5 ECO button with light

6 On/o button with safety auto o light and TURBO setting

7 ’Water tank empty’ light

8 EASY DE-CALC light

9 EASY DE-CALC knob

10 Cord storage compartment

11 Second supply hose storage compartment

12 Detachable water tank

13 Carry lock

14 Carry lock release button

15 Soleplate

16 Steam trigger

17 ‘Iron ready’ light

18 Filling hole

Important

Read the separate important information leaet and the user

manual carefully before you use the appliance. Save both

documents for future reference.

Using your appliance

Filling the water tank

Fill the water tank before every use and when the ‘water tank

empty’ light ashes.

Do not add perfume, water from the tumble dryer, vinegar,

starch, descaling agents, ironing aids, chemically descaled

water or other chemicals, as they may cause water spitting,

brown staining or damage to your appliance.

1 Remove the water tank from the appliance and ll it with

tap water up to the MAX indication.

ENGLISH

Tip: Your appliance has been designed for use with tap water.

If you live in an area with very hard water, scale builds up

quickly. In this case it is recommended to use distilled water

to prolong the life of your appliance.

2 Put the water tank back into the appliance by sliding in the

bottom part rst. Then push the top part until it locks into

place.

‘Water tank empty’ light

When the water tank is almost empty, the ‘water tank

empty’ light goes on. Fill the water tank and press the steam

trigger to let the appliance heat up again. When the ‘iron ready’

light lights up continuously, you can continue steam ironing.

OptimalTEMP Technology

The OptimalTEMP Technology enables you to iron all types

of ironable fabrics, in any order, without adjusting the iron

temperature setting.

Fabrics with these symbols are ironable, for example linen,

cotton, polyester, silk, wool, viscose and rayon.

Fabrics with this symbol are not ironable. These fabrics include

synthetic fabrics such as Spandex or elastane, Spandex-mixed

fabrics and polyolens (e.g. polypropylene), but also prints on

garments.

Ironing

1 Place the steam generator on a stable and even surface.

2 Make sure that there is enough water in the water tank

(see section ‘Filling the water tank’).

3 Put the mains plug in an earthed wall socket and press the

on/o button to switch on the steam generator. The blue

power-on light on the appliance and the ‘iron ready’ light

start to ash to indicate that the appliance is heating up

(this takes approx. 2 minutes).

,When the appliance is ready for use, the ‘iron ready

light’ and the power-on light stop ashing and light up

continuously.

ENGLISH

4 Press the carry lock release button to unlock the iron from

the iron platform.

5 Press and hold the steam trigger to start ironing.

Never direct steam at people.

Steam boost function

The steam boost function is designed to help tackle dicult

creases.

-Double press the steam trigger for a continuous shot of

steam. It is not necessary to press and hold the steam

trigger continuously when the steam boost function is

activated. To stop the steam boost function, press the

steam trigger once.

Vertical ironing

Hot steam is emitted from the iron. Never attempt to remove

creases from a garment that someone is wearing. Do not

apply steam near your or someone else’s hand.

You can use the iron in vertical position to remove wrinkles

from hanging fabrics.

1 Hold the iron in vertical position, press the steam trigger

and touch the garment slightly with the soleplate.

ENGLISH

Putting down the iron during ironing

-During ironing, you can place the iron either on the iron

platform or horizontally on the ironing board. Thanks to the

OptimalTEMP technology, the soleplate will not damage

the ironing board cover.

Energy saving

ECO mode

-By using the ECO mode (reduced amount of steam), you

can save energy without compromising on the ironing result.

The green light is on.

-You can deactivate the ECO mode by pressing the ECO

button. The green light goes o.

Safety auto-o mode

-To save energy, the appliance switches o automatically

when it has not been used for 10 minutes. The auto-o light

in the on/o button starts to ash.

-To activate the appliance again, press the on/o button.

The appliance then starts to heat up again.

Note: The appliance is not switched o completely when it

is in safety auto-o mode. To switch o the appliance, press

the on/o button.

Turbo steam

For faster ironing and a higher amount of steam, you can use

Turbo steam.

1 Press and hold the on/o button for 2 seconds until the

light turns white.

2 To deactivate Turbo steam, press and hold the on/o

button again for 2 seconds until the white light turns blue

ENGLISH

Ironing tips

Minimising wrinkles while drying

Start wrinkle removal early in the drying process by spreading

out your laundry properly after washing and by putting

garments on hangers to make them dry naturally with fewer

wrinkles.

Best practice shirt ironing

Start with the time-consuming parts like collar, cu links and

sleeves. Next, iron the bigger parts like front and back to

prevent wrinkling the bigger parts when you are busy ironing

the time-consuming parts.

Collar: When you iron a collar, start on its underside and work

from the outside (the pointy end) inwards. Turn over and

repeat. Fold down the collar and press the edge for a more

crisp nish.

Buttons: Iron on the reverse side of the buttons for more

eective and faster ironing.

Cleaning and maintenance

To properly maintain your appliance, clean the iron and the

appliance regularly.

1 Clean the appliance with a moist cloth. To remove

stubborn stains, you can use a small amount of washing-

up liquid.

2 To easily and eectively remove stains from the soleplate,

switch on the appliance and let it heat up. When the

appliance has heated up, move the iron over a moist cloth

while you press the steam trigger.

Tip: Clean the soleplate regularly to ensure smooth gliding.

IMPORTANT - DESCALING

It is very important to perform the descaling procedure as

soon as the EASY DE-CALC light starts to ash.

The EASY DE-CALC light ashes after about a month or 10

ironing sessions to indicate that the appliance needs to be

descaled. Perform the following descaling procedure before

you continue ironing.

To avoid the risk of burns, unplug the appliance and let it cool

down for at least two hours before you perform the descaling

procedure.

1 Remove the plug from the wall socket.

2 Place the appliance on the edge of the tabletop.

ENGLISH

3 Hold a cup (with a capacity of at least 350ml) under the

EASY DE-CALC knob and turn the knob anticlockwise.

4 Remove the EASY DE-CALC knob and let the water with

scale particles ow into the cup.

5 When no more water comes out of the appliance, reinsert

the EASY DE-CALC knob and turn it clockwise to fasten it.

Storage

1 Switch o the appliance and unplug it.

2 Remove the water tank and empty it.

3 Put the iron on the iron platform. Push the carry lock to

lock the iron onto the platform.

4 Fold the supply hose and mains cord. Put them in their

respective storage compartments.

5 You can carry the appliance with one hand by the handle

of the iron.

Do not carry the appliance by holding the water tank release

lever.

ENGLISH

Troubleshooting

This chapter summarises the most common problems

you could encounter with the appliance. If you are unable

to solve the problem with the information below, visit

www.philips.com/support for a list of frequently asked

questions or contact the Consumer Care Centre in your

country.

Problem Possible cause Solution

The ironing board

cover becomes

wet or there are

water droplets

on the garment

during ironing.

Steam has condensed on

the ironing board cover after

a long ironing session.

Replace the ironing board cover if

the foam material has worn out. You

can also add an extra layer of felt

material under the ironing board

cover to prevent condensation on

the ironing board. You can buy felt in

a fabric shop.

You have an ironing board

cover that is not designed

to cope with the high steam

rate of the appliance.

Put an extra layer of felt material

under the ironing board cover to

prevent condensation on the ironing

board. You can buy felt in a fabric

shop.

Water droplets

come out of the

soleplate.

The steam that was

still present in the hose

has cooled down and

condensed into water. This

causes water droplets to

come out of the soleplate.

Steam away from the garment for a

few seconds.

Steam and/or

water come out

from under the

EASY DE-CALC

knob.

The EASY DE-CALC knob is

not tightened properly.

Switch o the appliance and let the

appliance cool down for 2 hours.

Unscrew the EASY DE-CALC knob

and screw it back onto the appliance

properly. Note: Some water may

escape when you remove the knob.

The rubber sealing ring of

the EASY DE-CALC knob is

worn.

Contact an authorised Philips service

centre for a new EASY DE-CALC

knob.

Dirty water

and impurities

come out of the

soleplate or the

soleplate is dirty.

Impurities or chemicals

present in the water have

deposited in the steam

vents and/or on the

soleplate.

Clean the soleplate with a damp

cloth.

Too much scale and

minerals have accumulated

inside the appliance.

Descale the appliance regularly (see

chapter ‘Important - DESCALING’).

ENGLISH

Andere Handbücher für GC9600 SERIES

Inhaltsverzeichnis

Sprachen:

Andere Philips Eisen Handbücher

Philips

Philips GC4845/15 Bedienungsanleitung

Philips

Philips GC8261 Bedienungsanleitung

Philips

Philips PerfectCare Aqua GC8615 Bedienungsanleitung

Philips

Philips HI555 Bedienungsanleitung

Philips

Philips GC6620/20 Bedienungsanleitung

Philips

Philips Azur GC4250 Bedienungsanleitung

Philips

Philips Essence 5000 Series Bedienungsanleitung

Philips

Philips GC3100 SERIES Bedienungsanleitung

Philips

Philips Powerlife GC2965/86 Bedienungsanleitung

Philips

Philips Provapor GC6063 Bedienungsanleitung

Philips

Philips GC3580 series Bedienungsanleitung

Philips

Philips RI2560 Bedienungsanleitung

Philips

Philips GC6704 FastCare Compact Bedienungsanleitung

Philips

Philips GC1420 Bedienungsanleitung

Philips

Philips Provapor GC6026 Bedienungsanleitung

Philips

Philips GC2930/02 Bedienungsanleitung

Philips

Philips GC4845/35 Bedienungsanleitung

Philips

Philips GC6700 series Bedienungsanleitung

Philips

Philips Azur Freemotion GC4590 Series Bedienungsanleitung

Philips

Philips GC8280 Bedienungsanleitung

Philips

Philips GC1730 Bedienungsanleitung

Philips

Philips GC7600 series Bedienungsanleitung

Philips

Philips GC9140 Bedienungsanleitung

Philips

Philips GC6420 Bedienungsanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Scarlett

Scarlett SC-1334S Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

dyras

dyras ESI-2400AC Bedienungsanleitung

GE 169061 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 GC Bedienungsanleitung

AEG

AEG DBS 5591 Bedienungsanleitung