Philips 20HFL3330D/10 Bedienungsanleitung

PB1



Philips Hospitality LCD TV: Pro range

EN 20HFL3330D/10

Please ask your local sales support for additional information on correct installation/ positioning of the TV

in the room and complementary accessories

DFU-AUG2008

PHILIPS

PB2



Table of contents

1 INTRODUCTION FOR PBS MODE 2

2 REMOTE CONTROL 3

2.1 Remote control 2573 overview (optional) 3

2.2 Guest Remote control overview 3

3 INITIAL SETUP 5

3.1 Virgin mode – Out of box Setting 5

4 SETUP MENU AND PBS MODE BEHAVIOR

4.1 PBS MODE 6

4.2 APPLICATION 6

4.3 SWITCH ON SETTINGS 7

4.4 CONTROL SETTINGS 7

4.5 BLANK CHANNEL 8

4.6 SMARTLOADER TO TV 8

4.7 TV TO SMARTLOADER 8

4.8 STORE 9

4 PRACTICAL HINTS 9

PB3



1 INTRODUCTION TO PBS MODE

The Professional Business Solutions (PBS) mode defines a specific TV or monitor mode (similar to hotel mode).

This mode limits the amount of TV controls (e.g. like volume limitation), that a normal user (i.e. hotel guest) can use.

The amount of access can be configured in the setup menu by a super-user (e.g. hotel installer).

This manual describes how to setup a television channels using Virgin Mode, configure other TV settings and activate

the PBS mode.

2 REMOTE CONTROL

2.1 PBS Set-Up Remote control 2573

(optional)

Note: Setup mode should be selected for hotel

installer.

2.2 Guest Remote control

22AV1104/10

1. On/Standby

Switches the TV on from standby or back to

standby.

2. GUIDE (DVB-T)

Toggles the Electronic Program Guide on or off.

Only active with digital channels.

3. SOURCE

Selects connected devices.

4. SUBTITLE (DVB-T)

Activates or deactivates subtitles.

5. COLOUR KEYS

Selects tasks or teletext pages.

6. ALARM OFF

Disable Alarm status - Not applicable for this

model.

PB4



7. OK

Accesses the All channels menu or activates a

setting.

8. Navigate the menu.

9. SLEEP

Display the sleep timer menu and adjust the sleep

timer.

10. P +/-

Switches to the next or previous channel.

11. NUMBER KEYS

Selects a channel, page or setting.

12. Selects a picture format.

13. MHEG CANCEL

Cancels digital text or interactive services (UK

only).

14.

Mutes or restores sound.

15.

Increases or decreases volume.

16. MENU/EXIT

Toggles the menu on or off.

17. ALARM ON

Display the Alarm menu - not applicable for this

model.

18. TELETEXT

Toggles teletext on or off.

19.

Splits the current channel or source on the left of

the screen. Teletext appears on the right.

PBS EN

PB5



3 INITIAL SETUP

1.1 Virgin mode – Out Of Box Setting and Initial

Setup

This TV set includes an installation feature that, at

initial set-up of the TV, guides you through the

installer menu to apply the proper installation settings.

This feature, named Virgin Mode, active when the TV

set is unpacked and first powered on, is normally

used for installation/setting of first TV set. To save

time during a complete setup for hospitality system

with more televisions, the settings of this first TV set

can be duplicated to other televisions using the

cloning mechanism (described in chapters 4.6 and

4.7).

Please select your language

Press OK or the green color key on your remote control

to confirm

Before setting PBS Mode to ON, and not

using cloning as configuration mechanism,

the television must be configured.

Note: In case of cloning the TV settings,

Virgin mode can be skipped by pressing the

“Menu” button on the television twice.

Follow the Virgin Mode guiding to set all

channels/programs

Digital Channels start at Program Number 1, Analogue

Channels start at Program Number 900.

Note:The channel list can be customized by hotel

installer through Rearrange channel list feature

as indicated below.

Also rearrange channels can be easily done

through using Rename Channels feature by

entering direct channel numbers and channel

name if needed.

After setup/installation is completed, subsequent

switching on the TV will not let this Virgin Mode menu

to pop up again.

For details refer to consumer TV User Guide.

Preferred customer picture, sound and feature

settings - these settings will be used whenever the TV

is switched on from mains or standby in PBS Mode

This can be achieved by popping up consumer TV setup menu

as below and do Picture/sound setup and channel installation etc

accordingly: Apart from manually adjusting picture settings, you

can use Smart settings to set your TV to a predefined picture and

sound setting.

For details refer to consumer TV User Guide.

The installer should change the TV to Home mode by

select Install > Preferences > Location

PB6



4 DISPLAY SETUP MENUS

The TV can display PBS Setup menu by pressing

RC2573 MENU key in SETUP mode or by following

Guest RC key sequence “319753 ”” key within 10

seconds if high security mode set to Off.

The following menu appears.

4.1 PBS MODE

To activate PBS Mode, select ON.

4.2 APPLICATION

The Application to select is Hotel/Hospital or Business

Monitor; this is based on the installer requirement.

When APPLICATION is Hotel/Hospital, the limited

Guest TV menu can be accessed by guest as below:

Refer to consumer TV User Guide for the description

of each menu item.

When APPLICATION is BUSINESS MONITOR, the

normal consumer TV setup menu can be accessed by

using guest RC menu key with the additional control

features listed in the PBS setup menu.

PB7



4.3 SWITCH ON SETTINGS

• SWITCH ON VOLUME - The TV will always switch

on (via mains-switch or standby) to this preset value.

The On volume setting cannot exceed the max

volume. The current volume should follow the on

volume, and adjusting on volume should also affect

the current volume.

• MAXIMUM VOLUME – refers to the maximum

volume which the guest could adjust to.

• SWITCH ON CHANNEL – choice of channel

number (analog or digital) or an external video

source to go to when the TV set is switched on from

mains power or standby. In case of LAST STATUS

setting, the set will switch to the last channel or

source before the TV went to standby or mains

power off. This LAST STATUS setting takes priority

over the APPLICATION settings.

• POWER ON – Refers to power state after mains

power on. ON means the set should turn On after

mains power on, while Standby means the set

should turn to standby. LAST STATUS means that

the set should switch to the last power state before

mains power off.

• DISPLAY MESSAGE – Enable the display of the

welcome message for 30 secs after switching on the

set from mains power or standby. However, if OSD

Display is OFF, the welcome message display is

always disabled, regardless of the Display Message

Setting

• WELCOME MESSAGE – Define welcome message

of 2 lines of 20 alphanumeric characters each. The

characters used depend on the language selected

for consumer operation.

The letters are entered and navigated through cursor

keys and digit keys.

4.4 CONTROL SETTINGS

• TELEVISION BUTTONS LOCKED – Selection of

television buttons locked or unlocked. ON means all

television buttons are locked, except the Power

button, OFF means all television buttons are enabled,

while ALL means all television buttons are locked,

including the Power button.

PB8



• REMOTE CONTROL LOCKED – Enable or disable

the operation of the normal remotes. However, when

the High Security Mode is OFF, to enter PBS Mode

Menu, using the “319753 ”” key sequence is not

blocked, even when Remote Control Locked is ON.

• OSD DISPLAY – Enable or disable OSD display

(e.g., channel number or name, sound mode, volume

bar, clock, etc.).

• HIGH SECURITY MODE – choice between using

normal consumer RC or PBS setup RC to display the

setup menu. When enabled, only the setup RC menu

key can display the setup menu. When disabled, both

the setup RC menu key and normal guest remote

control sequence “319753 ” can display the setup

menu.

• AUTO SCART – Enable (ON) or disable (OFF)

autoscart switching or break-in in PBS mode.

• LOW POWER STANDBY - define the power mode

when TV set goes to standby by pressing RC power

key or Local Keyboard power key - Green: TV will

enter low standby power mode to achieve minimum

power consumption; Fast: TV will enter semi-standby

mode to achieve fast powering up,

4.5 BLANK CHANNEL

• BLANK CHANNEL - choice of either blank or not

blanking the video for the current channel. In PBS

application, the blanked channel is used for off-air

radio transmission, e.g., re-modulated FM radio,

music CDs etc. The current blank mode should follow

the channel blanked status and changing the channel

blanked should also blank or unblank the current

channel.

Note:Channel Blank will apply for the current

channel, to navigate and blank other channels,

Blank channel submenu should be selected by

clicking on right cursor key as below:

4.6 SMARTLOADER TO TV (using USB)

Copy TV configuration data (Video, Audio,

Channel Table, PBS Mode settings) from USB

Memory stick to TV. Upon copying progress

completion, an indication message will feedback to

PBS-user (“Settings copied to TV”).

Note:During copying process, the USB memory stick

should not be removed to prevent any undersigned

functionality of the TV.

Note:During this process, the cloning files

NVM_MTK_2K8_EU.BIN and CH_MTK_2K8_EU.BIN

are retrieved by TV and update the TV NVM and

Channel setup accordingly.

Note:All RC command and local keyboard will be

disabled during copying process

Note:It is recommended to do a television switch

off/switch on after the cloning is done.

4.7 TV TO SMARTLOADER (using USB)

Copy TV configuration data ( Video, Audio, Channel

Table, PBS Mode settings[i.e.Welcome Message, …])

from TV to USB drive.

• Upon copying progress completion, an indication will

given as feedback to PBS-user (“Settings copied to

USB”)

PB9



A 128MB USB Memory Stick with at least

10MB free memory space will be suitable.

Note:During copying process, USB drive should

not be removed to prevent any undersigned

functionality of the TV.

Note:After completed, there are 2 files

generated in the USB root directory -

NVM_MTK_2K8_EU.BIN containing the general

setting for example, Video/Audio, etc. and

CH_MTK_2K8_EU.BIN containing the channel

installation setting for example channel list, etc.

Note:All RC command and local keyboard will

be disabled during copying process

Note: Normally, the first TV is manually

configured/setup by the hotel installer, then all

the data are transferred/ cloned to USB drive through

TV to Smart Loader, subsequently, others TVs can be

updated by using same USB drive. This cloning

feature prevent multi manually setup on all the TV

sets, hence, speed up the hotel installation process.

4.8 STORE

Activation of this item will store PBS mode settings.

The PBS mode setting will take effect after putting the

set to standby.

Important:

Cloning system and configuration setttings, using

USB or SerialXpress, is only supported in case of

using equal televisions.

5 HOW TO POSITION YOUR TV

VIEWING ANGLE is the most convenient angle at

which a display can be viewed with good visual

performance

How a TV and panel are designed:

What to do if viewing angle is not good enough:

•Add tilt (vertical) or swivel (horizontal) to the TV,

in order to position the TV in the most optimal

situation.

•If the TV is placed above a certain height, it’s

advised to always tilt the TV.

Philips has wall mounts with tilt for hotel TVs as

optional accessories.

PhilipsisrecommendingtopositiontheTVasmentioned

above.PositioningtheTVdifferentlymighthaveimpact

ontheviewingangle.Philipsisnotresponsiblefor

reducedviewingexperienceduetowrongviewingangle

iftheTVispositioneddifferentlythenrecommended.

PB10



ABC

72-E330MD-X411A



Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips LCD-Fernseher Handbücher

Philips

Philips 26PF8946/12 Bedienungsanleitung

Philips

Philips 22PFL5403 Bedienungsanleitung

Philips

Philips 20PF7835/58 Bedienungsanleitung

Philips

Philips 47PFL3603D/27 Bedienungsanleitung

Philips

Philips 20PF1000/62 Bedienungsanleitung

Philips

Philips 15PF7835 Bedienungsanleitung

Philips

Philips 47PFG7109 Bedienungsanleitung

Philips

Philips 37PFL8694H/12 Bedienungsanleitung

Philips

Philips 3139 125 31421 Handbuch

Philips

Philips Dell W2300 Bedienungsanleitung

Philips

Philips Cineos 47PFL9632D/10 Bedienungsanleitung

Philips

Philips 42PFL74335/60 Bedienungsanleitung

Philips

Philips 21PT5618/01 Bedienungsanleitung

Philips

Philips 21PT5618/01 Bedienungsanleitung

Philips

Philips 32PFL4505D Bedienungsanleitung

Philips

Philips Cineos 37PF9830/10 Bedienungsanleitung

Philips

Philips MatchLine 30PF9975 Bedienungsanleitung

Philips

Philips 43PUH6101/88 Bedienungsanleitung

Philips

Philips PrimeSuite 22HFL4373D/10 Bedienungsanleitung

Philips

Philips 40HFL7382A Bedienungsanleitung

Philips

Philips 46PFL7605H Bedienungsanleitung

Philips

Philips Cineos 42PFL9732D/10 Bedienungsanleitung

Philips

Philips 46PFL5706/F7 Bedienungsanleitung

Philips

Philips 32PFL3514D Bedienungsanleitung

Beliebte LCD-Fernseher Handbücher anderer Marken

LG 32LC4R* Bedienungsanleitung

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Toshiba

Toshiba 57X3000A Bedienungsanleitung

Runco

Runco CX-52HD Bedienungsanleitung

Sharp

Sharp LC-32AX3H Bedienungsanleitung

Vizio

Vizio VO42LFHDTV10A Bedienungsanleitung

Insignia

Insignia NS-LCD32-09 Bedienungsanleitung

Sony

Sony WEGA KLV-27HR3 Bedienungsanleitung

Nexus

Nexus NX32031 Bedienungsanleitung

Zenith

Zenith Z32LC2D Bedienungsanleitung

Sony

Sony KDL-32S3000R - 32" Class Bravia S-series Digital Lcd... Bedienungsanleitung

Medion

Medion MEDION LIFE X14330 Bedienungsanleitung

Vizio

Vizio HDTV30A VW32L Bedienungsanleitung

Sharp

Sharp LC-24DV250K Bedienungsanleitung

SOYO

SOYO Dymond DYLT032A Bedienungsanleitung

Dynex

Dynex DX-L40-10A Kurzanleitung