Philips 26PF8946/12 Bedienungsanleitung

Introduction

Table of Contents

Thank you for purchasing this television set.

This handbook has been designed to help you install and operate your TV set.

We would strongly recommend that you read it thoroughly.

We hope our technology meets entirely with your satisfaction.

Installation

Presentation of the LCDTelevision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

The keys on the TV set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Remote control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Installing your television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Quick installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Program sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Manual store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Other settings in the Install menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Operation

Picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Sound adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Feature settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Mode selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

16:9 Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Using the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Using in PC monitor mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Peripherals

Video recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

To select connected equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Side connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Practical information

Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

°Recycling

The materials used in your set are either reusable or can be recycled.

To minimise environmental waste, specialist companies collect used appliances

and dismantle them after retrieving any materials that can be used again (ask

your dealer for further details).

PROGRAM

VOLUME

Presentation of the LCDTelevision

Remote control

VGA

In DVI

In Audio

Audio

Out

EXT 1 EXT 2FM ANT

"'(§

& Television keys:

• .: to switch the TV on or off.

•VOLUME - + (-”+): to adjust sound level.

• PROGRAM - + (- P +): to select programmes.

• MENU: to access or close menus, simultaneously

press the ”- and ”+ keys. The - + keys can

be used to select an adjustment and the ”- +

keys to make that adjustment.

é Adjustable stand.

The stand can be removed and replaced with a

wall mounting kit available as an option (ask your

dealer).

Rear of set :

The main connections are made at the bottom of

the television.

For more details on connections see page 10.

“TV and radio aerial sockets

‘EXT1 and EXT2 socket

(Audio output for connecting an amplifier.

§VGA, DVI and audio input for connecting a

computer.

èSide connections

Insert the two R6-type batteries supplied, making

sure they are the right way round.

The battery supplied with the appliance does not

contain mercury or nickel cadmium so as to protect

the environment. Please do not discard your used

batteries, but use the recycling methods available

(consult your distributor).

MODE

MUTE

RADIO

VCR

DVD

SMARTSMART ACTIVE

CONTROL

PC TV

564

879

·¢Ê

∆

∫

¤Ó

Ÿı

∏

[

”

Remote control keys

Select peripherals (p.10)

Press several times to select the

required EXT connector.

Teletext keys (p. 8) orVCR / DVD

œPIP on/off (p. 9)

πMove PIP

Smart picture and sound

Used to access a series of predefined

picture and sound settings.

The Personal position relates to settings

selected from the menus.

Sound mode

Used to force programmes in STEREO

and NICAM STEREO to MONO or,

for bilingual programmes, to choose

between DUAL I or DUAL II.

When the sound mode is switched to

MONO, the indication is displayed in red.

To call up or exit the menus.

Cursor

These 4 keys are used to move

around the menus.

Volume

To adjust the sound level

PC /TV / Radio

Press one of these keys to switch

the television between PC,TV or

radio mode (p. 9).

16:9 formats (p. 7)

Mute

To mute or restore the sound.

Screen information

To display / remove the programme

number, the name (if it exists) and

the sound mode . Hold down for 5

seconds to permanently display the

programme number on the screen.

Standby

To set the TV to standby mode.To

switch the TV set on again, press

b,P@#or 09.

List of programmes

To display/clear the list of programmes.

Use the keys îÏ to select a

programme and the key ¬to display it.

unused keys.

Surround sound

To activate

deactivate the surround

sound effect. In stereo, this gives the

impression that the speakers are further

apart. For models equipped withVirtual

Dolby Surround*, you can obtain Dolby

Surround Pro Logic sound quality. In

mono, a stereo spatial effect is simulated.

SelectingTV programmes

To move up or down a programme.

The number, (the name) and the

sound

mode are displayed for a few

seconds.

For some TV programmes the title of

the programme appears at the

bottom of the screen.

Numerical keys

For direct access to programmes.

For a 2 digit programme number,

the 2nd digit must be entered

before the dash disappears.

Previous programme

To access the previously viewed

programme.

* Manufactured under license from Dolby Laboratories. ”Dolby” ”Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

Mode selector (p. 7)

To activate the remote control in

TV,VCR (video recorder) or DVD

mode.

Quick installation

When you turn on theTV set for the first time,

a menu is displayed on screen.This menu

prompts you to select the country and language

for the menus:

If the menu is not displayed, press and hold down

the ”- and ”+ keys on the TV set for 5

seconds to display the menu.

&Use the îÏ keys on the remote control to

select your country and validate with ¬.

If your country does not appear in the list, select

choice “. . .”

éNext select your language using the îÏ

keys and validate with ¬.

“The search starts automatically.All the available

TV programmes and radio stations will be

stored. This operation takes a few minutes.The

display shows the progress of the search and

the number of programs found. At the end of

the search, the menu disappears.

To exit or interrupt the search, press H.If no

programme is found, consult the possible solutions p. 12.

‘If the transmitter or cable network sends the

automatic sort signal, the programs will be

numbered correctly. In this case, the installation

is complete.

(If this is not the case, you need to use the Sort

menu to number the programs correctly.

Some transmitters or cable networks broadcast their

own sort parameters (region, language, etc.). In this

case, indicate your choice using the îÏ keys

and validate with ¬.

&Positioning the television set

Place yourTV on a solid stable surface. To avoid

danger do not expose the TV to water, or a heat

source (e.g. lamp, candle, radiator). Do not

obstruct the ventilation grid at the rear.

éConnecting the aerials

• Use the aerial connection lead supplied and

connect the :socket situated at the bottom

of the TV to your aerial socket.

• Insert the radio aerial lead supplied into the FM

ANT socket located at the bottom of the TV.

• Connect the power lead to the television and the

mains plug into the wall socket (220-240V/50 Hz).

For connecting other appliances see page p.10.

“Switching on

To switch on the set, press the on/off key. A

green indicator comes on and the screen lights

up. Go straight to the Quick Installation chapter.

If the TV remains in standby mode(red indicator),

press the P #key on the remote control.

The indicator will flash when you use the remote control.

Installing your television set

FM ANT.

FM ANT

PROGRAM

VOLUME

Plug’n’Play

Country

Language

English

Manual store

Other settings in the Install menu

This menu is used to store the programmes

one at a time.

&Press the Hkey.

éWith the cursor, select the Install menu then

Manual store:

“System: select Europe (automatic detection*)

or Western Europe (BG standard), Eastern

Europe (DK standard), United Kingdom (I

standard) or France (LL’ standard).

* Except for France (LL’ standard), you must select

choice France.

‘Search: press ¬.The search starts. Once a

programme is found, the scanning stops and its

name is displayed (when available). Go to the

next step. If you know the frequency of the

required programme, this can be entered

directly using the 0to 9keys.

If no picture is found, consult the possible solutions (p. 12).

(Program No.: enter the required number

with the È¬ or 0to 9keys.

§FineTune: if the reception is not satisfactory,

adjust using the È¬ keys.

èStore: press ¬.The program is stored.

!Repeat steps ‘to !for each programme to

store.

çTo quit the menus, press d.

&Press the Hkey and select the Install menu:

éLanguage: to change the display language for

the menus.

“Country: to select your country (GB for

Great Britain).

This setting is used for the search, automatic

programme sort and teletext display. If your country

does not appear in the list, select “. . .”

‘Auto Store: to start automatic search for all

programmes available in your region. If the

transmitter or cable network sends the

automatic sort signal, the programmes will be

numbered correctly. If this is not the case, you

need to use the Sort menu to renumber the

programmes (see p. 4).

Some transmitters or cable networks broadcast

their own sort parameters (region, language, etc.). In

this case, indicate your choice using the îÏ

keys and validate with ¬.To quit or interrupt the

search, press H. If no picture is found, consult the

possible solutions (p. 12).

(Name:

If required, you can give a name to the

programmes and external connectors. Use the

È¬ keys to move around the name display

area (5 characters) and the îÏ keys to

select the characters.When the name has been

entered, use the Èkey to exit.The name is

stored.

Note: on installation, the programs are named

automatically when an identification signal is sent.

§To quit the menus, press d.

TV Menu

Picture

Sound

Features

Install

Mode

Manual Store

System

Program No.

Fine Tune

Store

Europe

Program sort

&Press key H.The TV Menu is displayed on

the screen.

éWith the cursor, select the Install menu

followed by the Sort menu.

“Select the programme you want to move using

the îÏ keys and press ¬.

‘Then use the îÏ keys to select the new

number and validate with È.

(Repeat steps “and ‘for each program you

wish to renumber.

§To quit the menus, press d.

TV Menu

Picture

Sound

Features

Install

Mode

Install

Language Æ•

Country Æ•

Auto Store Æ•

Manual Store Æ•

Sort Æ•

Name Æ•

Picture settings

Sound adjustments

&Press Hthen ¬.The Picture menu is

displayed:

éUse the îÏ keys to select a setting and

the È¬ keys to adjust.

“Once the adjustments have been made, select

Store and press ¬to store them. Press d

to exit.

Description of the adjustments:

• Brightness: this changes picture brilliance.

• Colour: this changes the intensity of the colour.

• Contrast: this changes the difference

between the light and dark tones.

•

Sharpness: this changes the picture definition.

• ColourTemp.: this changes the colour

rendering: Cold (bluer), Normal (balanced)

or Warm (redder).

• Store: to store the picture adjustments and

settings.

&Press H, select Sound (Ï) and press ¬.

The Sound menu is displayed:

éUse the îÏ keys to select a setting and

the È¬ keys to adjust.

“Once the adjustments have been made, select

Store and press ¬to store these changes.

‘To quit the menus, press d.

Description of the settings:

• Equalizer: to adjust the sound tone (from

bass: 120 Hz to treble: 10 kHz).

• Balance: this balances the sound on the left

and right speakers.

• DeltaVolume: this is used to compensate

any volume discrepancies between the

different programs or EXT sockets.This

setting is available for programs 0 to 40 and

the EXT sockets.

• AVL (AutomaticVolume Leveller): this is

used to limit increases in sound, especially on

program change or advertising slots.

• DolbyVirtual:To activate / deactivate the

surround sound effect.You can also access

these settings with key t.

• Store: this is used to store the sound settings.

Feature settings

&Press H,select Features (Ï) and press ¬.

You can adjust:

éTimer : see next page

“Contrast +: automatic adjustment of the

picture contrast which permanently sets the

darkest part of the picture to black.

‘NR: attenuates picture noise (snow) in difficult

reception conditions.

§To quit the menus, press d.

TV Menu

Picture

Sound

Features

Install

Mode

Picture

Brightness

Colour

Contrast

Sharpness

Colour Temp.

Store

TV Menu

Picture

Sound

Features

Install

Mode

Sound

Equalizer Æ•

Balance Æ•

Delta Volume Æ•

AVL Æ•

Dolby Virtual Æ•

Store Æ•

120 Hz

500 Hz

1500 Hz

5 KHz

10 KHz

16:9 Formats

The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format

(conventional screen). 4:3 pictures sometimes have a black band at the top and bottom of the screen

(letterbox format).This function allows you to optimise the picture display on screen.

Press the

key (or È¬) to select the different modes:

This TV set is also equipped with automatic switching which will select the correct-screen

format, provided the specific signals are transmitted with the programmes.

4:3

The picture is reproduced in 4:3 format and a black band is displayed on either side

of the picture.

Zoom 14:9

The picture is enlarged to 14:9 format, a thin black band remains on both sides of

the picture.

Zoom 16:9

The picture is enlarged to 16:9 format.This mode is recommended when displaying

pictures which have black bands at the top and bottom (letterbox format).

Subtitle Zoom

This mode is used to display 4:3 pictures using the full surface of the screen leaving

the sub-titles visible.

Super Wide

This mode is used to display 4:3 pictures using the full surface of the screen by

enlarging the sides of the picture.

Widescreen

This mode restores the correct proportions of images transmitted in 16:9.

Note: If you display a 4:3 picture in thid mode, it will be enlarged horizontally.

Fullscreen

This mode displays images in full screen.

Mode selector

bstandby,

·recording,

¢fast rewind,

Êstop,

Æplay,

∫fast forward,

∆pause

%VCR timer,

cDVD : subtitling

language

Hmenu,

cursor navigation and

adjustments,

OK validation,

09 digit keys,

@P#programme selection,

eaudio selection.

dOSD menu,

Most of the audio and video equipment from our range of products

can be operated with the remote control of the TV.

The remote control is compatible with all video recorders using the RC5

standard and all DVDs using the RC6 standard.

&Press the MODE key to select the required mode : VCR (video

recorder) or DVD.The remote control indicator lights up to display

the selected mode. It switches off automatically after 20 seconds if left

idle.The remote control automatically returns to TV mode.

éThe following keys are operational, depending on the equipment :

MODE

MUTE

VCR

DVD

SMART SMART

RADIO

ACTIVE

CONTROL

PC TV

564

879

¤Ó

∆

∫

Ê¢·

ËÁ

∏

[

”

Teletext

Press : You will obtain :

Teletext is an information system broadcast by certain channels which can be consulted like a

newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar

with the transmission language (cable networks, satellite channels, etc.).

MODE

MUTE

VCR

DVD

SMART SMART

RADIO

ACTIVE

CONTROL

PC TV

564

879

∆

∫

∏

[

”

Teletext call

Selecting a

page

This is used to call teletext, change to transparent mode

and then exit.The summary appears with a list of items

that can be accessed. Each item has a corresponding

3 digit page number.

If the channel selected does not broadcast teletext, the

indication 100 will be displayed and the screen will remain

blank (in this case, exit teletext and select another channel).

Enter the number of the page required using the 0to 9

or @P#keys. Example: page 120, enter 120.

The number is displayed top left, the counter turns and

then the page is displayed. Repeat this operation to view

another page.

If the counter continues to search, this means that the page is

not transmitted. Select another number.

Direct access

to the items

Coloured areas are displayed at the bottom of the screen.

The 4 coloured keys are used to access the items or

corresponding pages.

The coloured areas flash when the item or the page is not yet

available.

Contents This returns you to the contents page (usually page 100).

Stop

sub-page

acquisition

Double page

teletext

Certain pages contain sub-pages which are automatically

displayed successively.This key is used to stop or resume

sub-page acquisition.The indication _appears top left.

To activate or deactivate the double page teletext display

mode.The active pa

ge is di

splayed on the left and the

following page is displayed on the right. Press

if you want

to hold a page (i.e. the contents page).The active page is then

displayed on the right.To return to normal mode, press

Hidden

information

Enlarge a

page

Favourite

pages

To display or hide the concealed information (games

solutions).

This allows you to display the top or bottom part of the

page and then return to normal size.

Instead of the standard coloured areas displayed at the bottom

of the screen, you can store 4 favourite pages on the first

40 channels which can then be accessed using the coloured

keys (red, green, yellow, blue). Once set, these favourite pages

will become the default every time tetetext is selected.

&Press the Hkey to change to favourite pages mode.

éDisplay the teletext page that you want to store.

“Press the coloured key of your choice for 3 seconds.

The page is now stored.

‘Repeat the operation with the other coloured keys.

(Now when you consult teletext, your favourite pages

will appear in colour at the bottom of the screen.

To temporaly retrieve the standard items, press H.

To clear everything, and return the standard items as the

default, press dfor 5 seconds.

Using the radio

Using in PC monitor mode

Choosing radio mode

Press the Zkey on the remote control to

switch the TV to radio mode. Press the X

key to return to TV mode. In radio mode the

number and name of the station (if available),

its frequency and the sound mode are

indicated on the screen.

Selecting programmes

Use the

or @P#keys to select the

FM stations (from 1 to 40).

List of radio stations

Press the

key to display / hide the list of

radio stations. Then use the cursor to select a

station.

Using the radio menus

Use the Hkey to access the specific radio

settings.

Searching radio stations

If you have used the quick installation all the

available FM stations will be stored. To start a

new search use the Install menu : Auto Store

(for a complete search) or Manual Store (for

a station by station search).These menus work

in exactly the same way as the TV menus.

Screen saver

In the Features menu you can activate / close

the screen saver.

PC Mode

Your TV can be used as a computer monitor.

The PIP function lets you display a

superimposed image to watch the TV channels

at the same time.

You must first of all connect the computer and

adjust the resolution (see p.11).

Choosing PC mode

Press the Vkey on the remote control to

switch the TV to PC-A mode (VGA In) or PC-

D mode (DVI In).Press the Xkey to return

to TV mode.

If there is no PC signal for more than five seconds,

the TV automatically goes into standby mode.

Using PIP

While in PC mode you can call up a window

for TV channels.

Attention:the PIP feature is only available if a

computer is connected to the DVI In (see p. 11).

&Press the œkey to display the PIP screen.

The television image is reproduced in a small

superimposed window.

éSubsequent presses of the œkey changes the

size of the window, switches to dual screen

and turns PIP off.

“Use the @P#keys to change the

programmes of the PIP screen or the nkey if

you want to display a picture from an appliance

connected to the TV (e.g. video recorder,

DVD).

Using the PC menus

Press the Hkey to access the specific settings of

the PC monitor mode. Use the cursor to adjust

them (the settings are automatically saved) :

• Picture :

- Brightness / Contrast

:to adjust the

brightness and contrast.

Horizontal / Vertical

to adjust the horizontal

and vertical placing of the image.

- Adjust Colour :

to adjust the colours (cold,

normal or warm).

• Audio Selection :

to choose the sound

reproduced on theTV (PC or TV/Radio).

For example, you can listen to the radio while

you use the computer.

• Features :

Phase/Clock*

eliminates the horizontal

(Phase) and vertical (Clock) interfering lines.

- View Format:

to choose between large screen

or the original format of the PC screens.

- PIP Controls :

to adjust the size and position

of the PIP screen.

- Auto Adjust :

position is set automatically.

• Reset To Factory Setting :

to return to the

factory settings (default settings).

• Mode Select :

to come back to TV or radio

mode.

*These adjustments are not available when a

computer is connected to the DVI In.

Connecting peripheral equipment

Carry out the connections shown opposite, using a good quality

euroconnector cable.

If your video recorder does not have a euroconnector socket, the only

connection possible is via the aerial cable.You will therefore need to

tune in your video recorder's test signal and assign it programme

number 0 (refer to manual store, p. 5).

To reproduce the video recorder picture, press 0.

Video recorder with decoder

Connect the decoder to the second euroconnector socket of

the video recorder.You will then be able to record scrambled

transmissions.

The television has 2 external sockets situated at the back of the set (EXT1 and EXT2).

The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.

The EXT2 socket has audio, CVBS/S-VHS inputs and audio, CVBS outputs.

Video recorder

Satellite receiver, decoder, CDV, games, etc.

Carry out the connections shown opposite.

To optimise picture quality, connect the equipment which

produces the RGB signals (digital decoder, games, etc.) to EXT1,

and the equipment which produces the S-VHS signals (S-VHS and

Hi-8 video recorders, certain DVD drives) to EXT2 and all other

equipment to either EXT1 or EXT2.

To select connected equipment

Press the nkey to select EXT1,EXT2/S-VHS2 (S-VHS signals

from the EXT2 socket) and AV/S-VHS for connections on the

front panel.

Most equipment (decoder, video recorder) carries out the switching itself.

Other equipment

VCR

EXT 1 EXT 2FM ANT

VGA In DVI In Audio InAudio Out

EXT 1 EXT 2FM ANT

AV in

AV 3

S-VIDEO

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips LCD-Fernseher Handbücher

Philips

Philips 37PFL5322S Bedienungsanleitung

Philips

Philips 42PFL3604H Bedienungsanleitung

Philips

Philips 32PFL4609 Bedienungsanleitung

Philips

Philips 47PFL5603D - annexe 1 Bedienungsanleitung

Philips

Philips 30PF9946/79 Bedienungsanleitung

Philips

Philips 3000 series Bedienungsanleitung

Philips

Philips 19PFL2908H Bedienungsanleitung

Philips

Philips 47PFL7403D Bedienungsanleitung

Philips

Philips 40PFL6626T Bedienungsanleitung

Philips

Philips 26FW5220 Bedienungsanleitung

Philips

Philips 8000 LED Series Bedienungsanleitung

Philips

Philips 32PHT5100 Bedienungsanleitung

Philips

Philips 42PFL7404H Bedienungsanleitung

Philips

Philips 17PF4310/58 Bedienungsanleitung

Philips

Philips 46PFL9715K Bedienungsanleitung

Philips

Philips 55PFL5240/T3 Bedienungsanleitung

Philips

Philips 47PFL3603D Bedienungsanleitung

Philips

Philips 42TA2800/79 Bedienungsanleitung

Philips

Philips Matchline 32PF9996/78 Bedienungsanleitung

Philips

Philips 15PT2967 Bedienungsanleitung

Philips

Philips PHG4900 Bedienungsanleitung

Philips

Philips 32PFL7623D Bedienungsanleitung

Philips

Philips PrimeSuite 22HFL4372D/10 Bedienungsanleitung

Philips

Philips 32PFL5405H/05 Bedienungsanleitung

Beliebte LCD-Fernseher Handbücher anderer Marken

LG 32LC4R* Bedienungsanleitung

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Toshiba

Toshiba 57X3000A Bedienungsanleitung

Runco

Runco CX-52HD Bedienungsanleitung

Sharp

Sharp LC-32AX3H Bedienungsanleitung

Vizio

Vizio VO42LFHDTV10A Bedienungsanleitung

Insignia

Insignia NS-LCD32-09 Bedienungsanleitung

Sony

Sony WEGA KLV-27HR3 Bedienungsanleitung

Nexus

Nexus NX32031 Bedienungsanleitung

Zenith

Zenith Z32LC2D Bedienungsanleitung

Sony

Sony KDL-32S3000R - 32" Class Bravia S-series Digital Lcd... Bedienungsanleitung

Medion

Medion MEDION LIFE X14330 Bedienungsanleitung

Vizio

Vizio HDTV30A VW32L Bedienungsanleitung

Sharp

Sharp LC-24DV250K Bedienungsanleitung

SOYO

SOYO Dymond DYLT032A Bedienungsanleitung

Dynex

Dynex DX-L40-10A Kurzanleitung