Philips 32PFL6506/V7 Bedienungsanleitung

32PFL6506/V7

32PFL6306/V7

Contents

EN 1

1 Notice 2

2 Important 3

Equipment connection

4.1 Name and Function of Control

3 Antenna and External

on Set

Product information

Supported display resolutions

USB

Tuner/Reception/Transmission

Remote control

Power

Supported TV mounts

Product Specification

4.2 Name and Function of Control

on Remote

4.3 Battery Installation

5.2

5.3 Sound Menu

5.6 Features Menu

5.5 Installation Menu

7 Troubleshooting

4 Use your TV

Picture Menu

Use more of your TV5

Access TV menus

5.1

5.4 Parental Menu

6 Play photos,music and videos 16

on USB storage devices

2 EN

1 Notice

Pixel characteristics

This LCD/LED product has a high number of

colour pixels. Although it has effective pixels of

99.999% or more, black dots or bright points of

light (red, green or blue) may appear constantly

on the screen. This is a structural property of

the display (within common industry standards)

and is not a malfunction.

Warranty

No components are user serviceable. Do not

open or remove covers to the inside of the

product. Repairs may only be done by Philips

Service Centres and official repair shops. Failure

to do so shall void any warranty, stated or

implied.

Any operation expressly prohibited in

this manual, any adjustments, or assembly

procedures not recommended or authorised in

this manual, shall void the warranty.

EN 3

2 Important

Read and understand all instructions before you

use your TV. If damage is caused by failure to

follow instructions, the warranty does not apply.

Safety

Risk of electric shock orfire !

Never expose the TV to rain or water.

Never place liquid containers, such as

vases, near the TV. If liquids are spilt on

or into the TV, disconnect the TV from

the power outlet immediately. Contact

Philips Consumer Care to have the TV

checked before use.

Never place the TV, remote control or. batteries near nakedflames or other heat

sources, including direct sunlight.

To prevent the spread of fire, keep

candles or otherflames away from the

TV, remote control and batteries at all

times.

Never insert objects into the ventilation

slots or other openings on the TV.

When the TV is swiveled ensure that

no strain is exerted on the powercord.

Strain on the power cord can loosen

connections and cause arcing.

Never expose the remote control or

batteries to rain, water or excessive heat.

Avoid force coming on to power plugs.

Loose power plugs can cause arcing or

Risk of injury or damage to the TV !

Two people are required to lift and carry

a TV that weights more than 25 kg.

fire.

Risk of electric shock orfire !

When stand mounting the TV, use only

the supplied stand. Secure the stand to

the TV tightly. Place the TV on flat, level

surface that can support the combined

weight of the TV and the stand.

When wall mounting the TV, use only a

wall mount that can support the weight of

the TV. Secure the wall mount to a wall

that can support the combined weight of the

TV and wall mount.PE Electronics Ltd. bears

that result in

accident, injury or damage.

Risk of injury to children!

Follow these precautions to prevent the

TV from toppling over and causing injury to

children:

Never place the TV on a surface covered

by a cloth or other material that can be

pulled away.

Ensure that no part of the TV hangs over

the edge of the surface.

Never place the TV on tall furniture (such

as a bookcase) without anchoring both

the furniture and TV to the wall or a

suitable support.

Educate children about the dangers of

climbing on furniture to reach the TV.

Risk of overheating!

Never install the TV in a space.

Always leave a space of at least 4 inches

or 10 cm around the TV for ventilation.

Ensure curtains or other objects never

cover the ventilation slots on the TV.

Risk of damage to the TV!

Before you connect the TV to the power

outlet, ensure that the power voltage

matches the value printed on the back

of the TV. Never connect the TV to the

power outlet if the voltage is different.

Risk of injury, or power cord damage!

Never place the TV or any objects on the

power cord.

To disconnect the TV power cord easily

from the power outlet, ensure that you

have full access to the power cord at all

times.

confined

fire

no responsibilityfor improper wall mounting

4 EN

Disposal of your old product and

batteries

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

When you disconnect the power cord,

always pull the plug, never the cable.

Disconnect the TV from the power

outlet and antenna before lightning

storms. During lightning storms, never

touch any part of the TV, power cord or

antenna cable.

Risk of hearing damage!

Avoid using earphones or headphones at

high volumes or for prolonged periods of

time.

Low temperatures

If the TV is transported in temperatures

below 5

until the TV temperature matches room

temperature before connecting the TV to

the power outlet.

Screen care

Avoid stationary images as much as

possible. Stationary images are images

that remain on-screen for extended

periods of time. Examples include:

on-screen menus, black bars and time

displays. If you must use stationary

images, reduce screen contrast and

brightness to avoid screen damage.

Unplug the TV before cleaning.

Clean the TV and frame with a soft,

damp cloth. Never use substances such as

alcohol, chemicals or household cleaners

on the TV.

Risk of damage to the TV screen! Never

touch, push, rub or strike the screen with

any object.

To avoid deformations and colour fading,

wipe off water drops as soon as possible.

C, unpack the TV and wait

ANT I N

Y1 Pb1 Pr1 L1 YPbPr1

AV1 Av1R1

LYPbPr1

AV1 Av1R

ANT IN

1. The aerial cable should not be bundled to the power cord.

COMPONENT (YCbCr/YPbPr) DVD INPUT

1. Connect the component outputs (YCbCr / YPbPr) of

DVD player to the component (YPbPr) input of the

the TV.

2. Connect audio outputs (L,R) of a DVD player to the

audio input (YPbPr) respectively.

3. Press the PLAY button on the DVD player.

VIDEO INPUT

1. Connect the component outputs VIDEO out

of VCR/Cable receiver to AV1, AV2.

2. Connect audio outputs (L, R) of a DVD player to the

audio input AV1, AV2 respectively.

3. Press the PLAY button on the VCR.

Note : Selecting a Source

Press SOURCE key on remote or on front panel keypad.

Press TV key on the remote to enter into TV source from any other source,

EN 5

3 Antenna and External Equipment Connection

A source OSD will appear. Press Up/Down key on the remote or CH+ /CH- on

or VOL’+' key from front panel to enter selected source or press SOURCE key

repeatedly to change and select source.

front panel can be used to select source. Press OK/Right key on the remote

except USB source.

ent such as VCR,DVD player

HDMI

3. Switch on the PC and PC screen appears on the set.

The set can be operated as PC monitor.

HDMI socket (HDMI1,HDMI2,HDMI3) on the TV.

USB

Connect / Insert standard USB and select USB

source on source OSD by pressing SOURCE key. Press

OK / Right key on remote, connected USB is Listed,

press OK to enter in selected USB .

Similarly front panel keys CH+/- and VOL+ can be

operated as Up/Down and OK/Right keys on remote

respectively.

HDMI

USB

NOTE :

1) CH+/CH- keys on remote are represented by - CH + on TV set.

VOL+/VOL- keys on remote are represented by on TV set.

6 EN

Note :

1) Above Sketches are just representation. Actual TV set may look differ than these sketches.

1) LED INDICATOR

2) IR SENSOR

3) STAND BY

4) SOURCE (TV/AV)

5) MENU

6) VOL-

7) VOL+

8) CH-

9) CH+

10) AC POWER IN

11) USB

12) HDMI 3

13) HDMI 2

14) HDMI 1

15) VGA IN

16) Y

17) Pb

A) Front Panel Control/Keys (Optional)

EN 7

4.1 Name and Function of Control on Set

18) Pr

19) VGA AUDIO IN

20) ANT IN

21) LIN1 IN

22) RIN1

23) VIN1

: Switch Channels.

: Adjust Volume.

:Access the home menu.

: Source Selection and Submenu entry.

: Switch the TV on or off.

: standby indicator and remote controller

sensor.

4 Use your TV

24) AV OUT

25) R2 IN

26) L2 IN

27) V2 IN

R2 IN

L2 IN

V2 IN

NOTE : This is for representation actual remote may differ.

8 EN

4.2 Name and Function of Control on Remote

INCR.SURR TELETEXT SOURCE

SCENEA DUAL I/II SLEEPDEMO

FREEZE EXIT

A/CH INFO

USB

FORMAT

21 3

54 6

87 9

SOUND PICTURE

BACK

POWER

Turns TV into STANDBY ON / OFF mode

INFO

Displays present source information with details of input signal connected .

MUTE

Turns sound OFF or ON

SOURCE

SLEEP

Sets sleep timer. Maximum time can be set 120 minutes in steps of

10,20,30,40,50,60,90,120 minutes.

NOTE :

1.Sleep Timer is deactivated when set isswitch to standby or mains power supply is switchedOff.

PICTURE

Recalls presetted picture settings can be selected.

SOUND

Recalls presetted sound settings can be selected.

DIRECT DIGIT NUMBER SELECTION Keys ( 0 to 9 )

Selects program number 1 - 200directly by using direct digit keys.

- To select 1 digit program number press desired program number & wait for few

seconds selected program number will appears on screen

- To select 2 digit or 3 digit program number press 1st, 2nd,or 3rd digit within

2 sec. after pressing 1 & 2 digit respectively.

- To enter password to lockor unlock channel and to set New Password.

INFO MUTE

SOURCE SLEEP

PICTURE SOUND

BACK (A/CH)

Toggles between current & last viewed channel. In USB mode use this

FORMAT

Selects a picture format. (NotApplicable in USB)

CH + / CH –

Navigate Up / Down through the valid channel.

To increase / decrease the volume

Navigates vertically up/down through the Menu/Sub menu.

- Used to setProgram name.

- Used to sorting purpose in Program edit menu.

- To enter into displayed Menu / Sub menu parameters.

- Select submenu from displayed menu.

- Increase / Decrease the value of selected items

- Select charactersinprogram name and time in time menu.

- Adjustsetting of selecteditem and set feature to ON/OFF.

- AdjustChannel number in tuning.

OK - Used to enter selected MENU items (Optional)

(MENU)

To Select menu OSD window and to exist from menu OSD window when menu

.window is displayed on screen

PressSOURCE key on remote or key on front panel keypad.

A source OSD will appear to select a source press OK/Right key on the remote or

VOL '+' key from frontpanel. Press source key repeatedly to change and select source.

Up/Down key on the remote or CH+/- on front panel can be used to changed sources.

(PERSONAL, CINEMA, SPORTS,VIVID,BRIGHT)

(PERSONAL, NEWS, STANDARD,MUSIC)

0-9

A/CH

FORMAT

+ / –

EN 9

key to exit fromimages, thumbnail mode and come back toprevious folder.

- Select Up/Down Text page in USB mode.

- Select Prev/Next text file in USB mode.

2.Use ‘Blue key to delete channel from channel edit list.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips LCD-Fernseher Handbücher

Philips

Philips 47PFL3605/98 Bedienungsanleitung

Philips

Philips EasySuite 19HFL3233D/10 Bedienungsanleitung

Philips

Philips 22PFL3404D Bedienungsanleitung

Philips

Philips 26PF5320/78 Bedienungsanleitung

Philips

Philips EIP-4500 Bedienungsanleitung

Philips

Philips 21PT2215 Bedienungsanleitung

Philips

Philips 29PT5520/01 Bedienungsanleitung

Philips

Philips 26HFL5830D Bedienungsanleitung

Philips

Philips 50PUD6654 Bedienungsanleitung

Philips

Philips 32PFL2302 Bedienungsanleitung

Philips

Philips 6764 Series Bedienungsanleitung

Philips

Philips 55PFL5705D Bedienungsanleitung

Philips

Philips 29PT4606 Bedienungsanleitung

Philips

Philips 47PFL5422D Bedienungsanleitung

Philips

Philips 19PFL3403D Bedienungsanleitung

Philips

Philips 42-LCD FLAT HDTV PIXEL PLUS 2 HD 42PF9830A - Hook Up... Bedienungsanleitung

Philips

Philips 40PFL4606D Bedienungsanleitung

Philips

Philips 40PFL9704H Bedienungsanleitung

Philips

Philips 37-LCD 37PF9431D Bedienungsanleitung

Philips

Philips 20HF4005 Bedienungsanleitung

Philips

Philips 42PFL3604H Bedienungsanleitung

Philips

Philips Essence 42PES0001H Bedienungsanleitung

Philips

Philips 32PF7411 Bedienungsanleitung

Philips

Philips 32HFL4441D Bedienungsanleitung

Beliebte LCD-Fernseher Handbücher anderer Marken

LG 32LC4R* Bedienungsanleitung

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Toshiba

Toshiba 57X3000A Bedienungsanleitung

Runco

Runco CX-52HD Bedienungsanleitung

Sharp

Sharp LC-32AX3H Bedienungsanleitung

Vizio

Vizio VO42LFHDTV10A Bedienungsanleitung

Insignia

Insignia NS-LCD32-09 Bedienungsanleitung

Sony

Sony WEGA KLV-27HR3 Bedienungsanleitung

Nexus

Nexus NX32031 Bedienungsanleitung

Zenith

Zenith Z32LC2D Bedienungsanleitung

Sony

Sony KDL-32S3000R - 32" Class Bravia S-series Digital Lcd... Bedienungsanleitung

Medion

Medion MEDION LIFE X14330 Bedienungsanleitung

Vizio

Vizio HDTV30A VW32L Bedienungsanleitung

Sharp

Sharp LC-24DV250K Bedienungsanleitung

SOYO

SOYO Dymond DYLT032A Bedienungsanleitung

Dynex

Dynex DX-L40-10A Kurzanleitung