Philips 42TA2000/93 Bedienungsanleitung

P41TN001813 1A

Quick Start Guide

CONTENTS

IMPORTANT

NOTE: This quick setup guide is used with several different LCD TV models. Not all features (and drawings) discussed in this

manual will necessarily match those found with your LCD TV set. This is normal and does not require that you contact your

dealer or request service.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE.

INSTALLING LCD TV ON THE WALL . . . . . . . . . . . . . . . . . . . . . . . 1

TV CHANNEL INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

PRESENTATION OF THE LCD TV. . . . . . . . . . . . . . . . . . . . . . . . . . . 2

ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

BATTERY INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

REMOTE CONTROL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

ANTENNA TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

BASIC CABLE TV CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

AUTO STORE (SETTING UP CHANNEL) . . . . . . . . . . . . . . . . . . . . . . .5

MANUAL SOTRE OF TV CHANNEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

CABLE BOX (WITH RF IN/OUTPUTS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

CABLE BOX (WITH AUDIO/VIDEO OUTPUTS) . . . . . . . . . . . . . . . . . . . . . . . .6

VCR, DVD PLAYER, OR OTHER DEVICES WITH RCA CONNECTORS . . . . . . .7

DVD PLAYER OR OTHER VIDEO DEVICES WITH COMPONENT VIDEO

CONNECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

AV OUTPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

PC (MONITOR) CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

DVD PLAYER WITH HDMI CONNECTOR . . . . . . . . . . . . . . . . . . . . . . . . . 9

INSTALLING LCD TV ON THE WALL

EnglishArabic 中文

There is no need to attach the base if you want to install your LCD TV on the wall.

400mm

200mm

When installing the LCD TV on the wall, please consult a professional technician for proper installing.

The manufacture accepts no liability for installations not performed by professional technician.

Quick Use and Hookup Guide

TV CHANNEL INSTALLATION

Immediately after unpacking and plugging in your new television, run the auto program function

to set up the TV for the broadcast or cable channels available in your area. If you do not run the

auto program function to set up the channels , your television may not operate properly.

PRESENTATION OF THE LCD TV

A/CH

Picture

Sound

Features

Install

Language

Auto store

Manual store

Channel setting

Factory reset

Install

Main Controls Install

Language

Auto store

Manual store

Channel setting

Factory reset

Auto store

Main Controls

Install Auto store

Start?

Please wait

Prog. found

Frequency

Auto store

MHz

Television Keys

• VOLUME + / - : To adjust sound level.

• CHANNEL + / - : To select programs.

• MENU : To access or close onscreen

menu.

Power button, LED light and infrared

sensor

• : To switch the TV on or off.

• Aim remote control at infrared sensors

to activate TV controls.

Rear connectors

The connectors at the rear of the LCD TV.

Bottom connectors

Located at the bottom of the set.

Please follow these steps to install TV channels:

Select a TV source via AV button on your remote control.

Press the CURSOR RIGHT button to conﬁ rm.

Press MENU button on your remote control to open the onscreen menu.

Press CURSOR DOWN to move to INSTALL, press CURSOR RIGHT on your

remote control to enter INSTALL.

Press CURSOR DOWN to move to AUTO STORE and press CURSOR RIGHT to

enter it.

Press CURSOR RIGHT to start auto install the TV Channels.

For more detailed explanation of AUTO STORE, please refer to

AUTO STORE section on page 5.

BATTERY INSTALLATION

REMOTE CONTROL OPERATION

ACCESSORIES

When you unpack this unit, make sure it includes the

following:

Power cable

Warranty Card

Power cable

Guarantee Card

User’s Manual & Quick Start Guide

Remove the battery compartment lid on

the bottom of the remote control.

Place two AA batteries in the remote.

Be sure the (+) and (-) ends of the

batteries line up as marked inside the

battery compartment.

Reattach the battery

compartment lid.

A/CH

A/CH button

Press to go to previously selected channel.

Sleep button

Press to set the LCD TV to turn itself off

within a certain time.

Unused key

Smart Sound button

Press repeatedly to select among the 5

settings; Personal, Speech, Music, Movie,

or Multimedia.

Menu button

Press to activate onscreen menu or press

to exit the onscreen menu.

Cursor Buttons

(Left, Right, Up, Down)

Press these buttons to highlight, select,

return, and adjust items on the TV’s on

screen menu.

Volume button

Press to increase or decrease the sound

level.

Mute button

Press to eliminate or restore the LCD TV

sound. Mute will appear on the screen

when the sound is muted.

Information button

Press to see the current channel number

on the TV screen.

Unused key

Picture Format button

Press the FORMAT button repeatedly to

toggle among the six screen format sizes;

Super Zoom, 4:3, Movie expand14:9,

Movie expand16:9, 16:9 Subtitle,

Widescreen.

Power button

Press to turn the LCD TV on or off.

I-II button / Sound mode

Press repeatedly to select Mono,

Stereo, Dual I, Dual II, Nicam Mono,

Nicam Stereo, Nicam Dual I, Nicam Dual

II.

Smart Picture button

Press repeatedly to select either

Personal, Rich, Nature, Soft, or

Multimedia of picture setting.

Virtual Surround button

Adds greater depth and dimension to TV

sound.

Select from Virtual Surround ON or

Virtual Surround OFF.

Channel button

Press to adjust the channel up or down.

Number buttons

Press the number buttons for direct

access to the TV channels. For a 2 digit

channel, enter the 2nd digit after enter

1st digit.

AV button

Press to select the video input source:

TV, HDMI, COMP VIDEO 1, COMP

VIDEO 2, S-video1, S-video 2 (Side), AV1,

AV2(Side), PC.

ANTENNA TV

A combination antenna receives normal broadcast channels. Your connection is easy because there is only one 75 Ω (ohm) antenna jack

on the back of your TV, and that’s where the antenna goes.

Outdoor or Indoor Antenna

(Combination VHF/UHF) Twin-lead wire

to 300-75� adpter

Antenna

with 75�

cable

Wall outlet

BASIC CABLE TV CONNECTION

The Cable TV Signal

from Cable Company

75� coaxial cable

Wall outlet

If your antenna has a round cable (75 ohm) on the end, then

you’re ready to connect it to the LCD TV. If your antenna

has ﬂ at, twin-lead wire (300 ohm), you ﬁ rst need to attach

the antenna wires to the screws on a 300- to 75-ohm

adapter(not supplied).

Connect the antenna (or adapter) to the TV jack on the back

of the LCD TV.

Plug the power cable into AC inlet on LCD TV set. Plug the

power cable into an outlet and switch TV set on.

Run the AUTO STORE function to set up the TV for the

broadcast or cable channels available in your area. If you do

not run the auto program function to set up the channels ,

your television may not operate properly.

• Remember, an antenna or cable TV signal must ﬁ rst be connected to

your LCD TV.

• Please make sure that you have selected the TV mode with AV key

on your remote control, before installing TV channels.

HELPFUL HINT

Your Cable TV input into your home may be a single (75 ohm) cable or use a cable box decoder. In either case the connection is very

simple. Follow the steps below to connect your cable signal to your new television.

Direct cable connections:

Connect the Cable TV signal to the TV jack on the LCD TV.

Plug the power cable into AC inlet on LCD TV set. Plug the

power cable into an outlet and switch TV set on.

Run the AUTO STORE function to set up the TV for the

broadcast or cable channels available in your area. If you do

not run the auto program function to set up the channels ,

your television may not operate properly.

• Remember, an antenna or cable TV signal must ﬁ rst be connected to

your LCD TV.

• Please make sure that you have selected the TV mode with AV key

on your remote control, before installing TV channels.

HELPFUL HINT

Your LCD TV can automatically set itself for local area (or cable TV) channels. This makes it easy for you to select only the TV stations in

your area by pressing the CH(+) or CH(-) button.

AUTO STORE (SETTING UP CHANNELS)

Press the MENU button on the remote control to show the

onscreen menu.

Press the CURSOR DOWN button to

highlight the INSTALL menu.

Press the CURSOR RIGHT button

to enter the INSTALL menu.

Press the CURSOR DOWN button to

highlight the AUTO STORE control and press CURSOR RIGHT to enter it.

Press the CURSOR RIGHT button to start the AUTO STORE scanning of

channels.

Press the MENU button repeatedly to clear the menu from the screen, after

AUTO STORE has ﬁ nished.

• Immediately after unpacking and plugging in your new television, run the auto

sotre function to set up the TV for the broadcast or cable channels available in

your area. If you do not run the auto store function to set up the channels ,

your television may not operate properly.

• After you’ve run Auto Store, check out the results. Press the CH(+) or the CH(-)

button and see which channels you can select.

• Remember, an antenna or cable TV signal must ﬁ rst be connected to your LCD TV.

HELPFUL HINT

You can also choose to tune your TV channels. Manual tuning allows you to store each programme manually.

MANUAL STORE OF TV CHANNEL

Press the MENU button on the remote control to show the onscreen

menu.

Press the CURSOR DOWN button to highlight the INSTALL menu,

then press CURSOR RIGHT to enter.

Select the MANUAL STORE, then press the CURSOR RIGHT button

to enter and press CURSOR RIGHT to activate auto search channel

frequence or press number button to show your desired channel

frequence, then press CURSOR RIGHT to start searching.

After the channel frequence is conﬁ rmed, select PROG. NO by

pressing CURSOR DOWN and pressing CURSOR RIGHT to enter.

Press CURSOR UP/DOWN to adjust the channel number and press

CURSOR RIGHT/LEFT to conﬁ rm the channel.

If the channel reception is not satisfactory, press CURSOR DOWN

button to highlight the FINETUNE and press CURSOR RIGHT to

enter, then press CURSOR UP/DOWN to adjust, press CURSOR

RIGHT/LEFT to conﬁ rm.

Press CURSOR DOWN to highlight STORE function. Press

CURSOR RIGHT to enter, then press CURSOR RIGHT to conﬁ rm

sotred.

Press the MENU button repeatedly to clear the menu from the

screen.

A/CH

Picture

Sound

Features

Install

Language

Auto store

Manual store

Channel setting

Factory reset

Install

Main Controls Install

Language

Auto store

Manual store

Channel setting

Factory reset

Manual store

Main Controls

Install Manual store

Manual store

Prog. no

Finetune

Store

Manual store

Prog. no

Finetune

Store

Main Controls I Install

Manual store Manual store

Start?

xxx.xx MHz

Manual store

Prog. no

Finetune

Store

Main Controls I Install

Manual store Prog. no

Prog. no

Manual store

Prog. no

Finetune 50

Main Controls I Install

Manual store

Finetune 50

Store

Finetune

Manual store

Prog. no

Finetune

Main Controls I Install

Manual store

Store

Store?

A/CH

Picture

Sound

Features

Install

Language

Auto store

Manual store

Channel setting

Factory reset

Install

Main Controls Install

Language

Auto store

Manual store

Channel setting

Factory reset

Auto store

Main Controls

Install Auto store

Start?

Please wait

Prog. found

Frequency

Auto store

MHz

CABLE BOX (WITH RF IN / OUTPUTS):

CABLE BOX (WITH AUDIO / VIDEO OUTPUTS):

CABLE

3 4

OUTPUT

Cable Box

The Cable TV

signal from

Cable Company

75� coaxial cable

Wall outlet

CABLE

VIDEO

OUT S VIDEO

AUDIO

OUT

3 4

OUTPUT

Cable Box

Cable TV signal

Connect the Cable TV signal to the IN jack (or RF IN or CABLE

IN) on the Cable Box.

Connect an RF coaxial cable (not supplied) to the OUT jack (or

TO TV or RF OUT) of the Cable Box.

Connect the other end of the coaxial cable to the TV jack on the

LCD TV.

Plug the power cable into AC inlet on LCD TV set. Plug the

power cable into an outlet and switch TV set on.

Set the Channel 3/4 (or Output channel) switch of the Cable Box

to 3 or 4. Set the TV to the same channel. When watching TV

programming, change channels at the Cable Box, not the LCD TV.

• Immediately after unpacking and plugging in your new television,

run the auto program function to set up the TV for the broadcast

or cable channels available in your area. If you do not run the auto

program function to set up the channels , your television may not

operate properly.

• Please make sure that you have selected the TV mode with AV key

on your remote control, before installing TV channels.

HELPFUL HINT

This connection will supply stereo sound to the LCD TV.

Connect the Cable TV signal to the IN jack (or RF IN or CABLE

IN) on the Cable Box.

Using a S-video cable (not supplied) connect one end of the video

cable to the Video Out jack of the Cable Box. Connect the other

end of the cable to the back of the TV.

Using RCA-type, stereo audio cables (not supplied), connect one

end of the cables to the left and right Audio Out jacks of the Cable

Box. Connect the other end of that cable to the Audio jack on the

back of the LCD TV. Audio cables are usually marked with red and

white and are available from Philips or electronics retailers. The

right audio jack is red and the left audio jack is white. Match the

cable colors to the jack colors.

Plug the power cable into AC inlet on LCD TV set. Plug the power

cable into an outlet and switch TV set on.

Note: Use the AV button on the remote control to tune to the AV channel

for the cable box signal. Once tuned, change channels at the cable box, not

the television.

When you watch programs using VCR, it’s recommended to select Soft

Mode via Smart picture.

A/CH

Accessory device equipped with

component video outputs

Wall outlet

AV Player with A/V connectors

A/CH

Wall outlet

VCR, DVD PLAYER, OR OTHER DEVICES WITH RCA CONNECTORS

The AV IN jacks on the rear of the LCD TV enable quick

connections of other equipment. Connect a DVD player, VCR

Video Game, Camcorder, etc., to these jacks. To view the

material playing on the other equipment, set the LCD TV to its

AV mode.

DVD PLAYER OR OTHER VIDEO DEVICES

WITH COMPONENT VIDEO CONNECTORS

Component Video Input (Y, Pb, Pr) provide the highest possible

color and picture resolution in the playback of digital signal source

material, such as with DVD player.

Using an RCA-type Video and Audio cable (usually marked yellow, red,

and white), connect the VCR’s Video and Audio Out jacks to the TV’s

Video and Audio In jacks.

Plug the power cable into AC inlet on LCD TV set. Plug the power

cable into an outlet and switch TV set on.

Use AV button on the remote control to select AV 1 (or AV2(Side), S-

Video1, or S-Video2 (Side) if you use the different jacks for this hookup)

to watch VCR.

Note:

1. If your VCR equipped with a S-Video Out jack, uses S-Video

connection for better picture detail and clarity. Use the S-Video cable

to connect the VCR’s S-Video Out jacks to the TV’s S-Video In jacks.

2. When you watch programs using VCR, it’s recommended to select

SOFT Mode via Smart Picture.

3. You can also use the Video and Audio jacks in AV IN 1 and Side AV

located on the rear of the TV to connect your VCR or other Video

Devices.

4. If your DVD Player is equipped with Component (Y, Pb, Pr) Output

Jacks, please refer to “Connecting a DVD Player or other Video

Equipments with Component Video Connectors” section for use

of Component Video Connection for highest color and picture

resolution in video playback.

Using a Component Video cable (not supplied), connect the DVD

player’s Y, Pb, Pr jacks to the Y, Pb, Pr jacks on the TV. Use the COMP

VIDEO1 or COMP VIDEO2 connections.

Using an AUDIO cable, connect the DVD player’s AUDIO OUT jacks

to the TV’s AUDIO IN jacks in COMP VIDEO1 or COMP VIDEO2

connections.

Plug the power cable into AC inlet on LCD TV set. Plug the power

cable into an outlet and switch TV set on.

Use AV button on the remote control to select COMP VIDEO1 or

COMP VIDEO2 to watch DVD.

Note:The Y, Pb, Pr jacks do not provide audio, so audio cables

must be connected to provide sound.

Computer

A/CH

Wall outlet

PC (MONITOR) CONNECTIONS:

This LCD TV can be used as a PC monitor. Your computer will

have to equipped with a VGA type video output and VGA cable.

Using a VGA cable (not supplied), connect PC’s VGA OUT connector

to the VGA connector on the TV. Use the PC IN connections.

Using a MINI-JACK type AUDIO cable (not supplied), connect the

PC’s AUDIO OUT connector to the AUDIO connector on the TV.

Use the PC IN connections.

Plug the power cable into AC inlet on LCD TV set. Plug the power

cable into an outlet and switch TV set on.

Use AV button on the remote control to select PC to use your LCD

TV as a PC monitor.

Note: Please refer to “Setting Up the PC Mode” section for all the

supported PC display modes. If possible, use the 1280 x 768@60Hz

video mode to obtain the best PC image quality.

AV OUTPUT

Connect one end of the yellow Video Cable

to the VIDEO jack of AV OUT connection.

Connect the other end to the VIDEO IN jack on

the VCR.

Connect one end of the red and white Audio

Cable from the L and R AUDIO jack of AV OUT

connection to the AUDIO IN jack on the VCR.

Connect audio cable form the SPDIF jack on the

rear of the TV to the DIGITAL IN jack on the

rear of the hi-ﬁ system.

Note: The SPDIF out is for digital audio output,

digital receiver, or ampliﬁ er.

The SPDIF out supports PCM(plus width

modulate) format and stereo mode only when

the HDMI input source is selected.

Turn the VCR on, insert a blank VHS tape and

it’s ready to record what’s being viewed on the

TV screen.

Note: The Program recording is only possible

when the input signal is TV, AV1, AV2(Side).

The AV (Audio/Video) out jacks are great for

recording with a VCR or used to connect an

external audio system for better audio.

For VCR Connection/Recorder:

VCR

Disconnect all power sources before

making any connections.

Using HDMI cable (not supplied), connect the

DVD player’s HDMI jack to the HDMI jack

on the TV.

Plug the power cable into AC inlet on LCD

TV set. Plug the power cable into an outlet

and switch TV set on.

HDMI is the leading new standard for Digital video and

audio interconnection. With the HDMI connector you

can connect HDMI Set-Top-Box compatible DVD-R

or DVD player with HDMI, or DVI-equipped devices

like a computer or other HDMI devices to your TV.

With this connection, you can display high-deﬁ nition

pictures on this TV in digital format.

Disconnect all power sources before making any

connections.

Wall outlet

DVD player

DVD PLAYER WITH HDMI CONNECTOR

Notes:

Due to legal requirements, it is possible that audio may be muted

when playing certain copy protected PCM audio from a device

connected to the HDMI input.

Your TV supports HDCP (High-bandwidth Digital Content

Protection). This is a system for protecting DVD content outputted

via DVI from being copied. It provides a secure digital link between

a video source (DVD,PC,etc.) and your TV. Content is encrypted at

the source device to prevent unauthorized copies from being made.

Proper working is only guaranteed with HDMI compliant consumer

products.

Digital devices from different manufacturers may differing output

standards, which may prevent your television from properly

displaying output.

If your TV does not detect a signal from your HDMI device, turn off

and then turn on the HDMI device. For optimal viewing, we

suggest you adjust your DVD player to one of the following TV

display standards:1920x1080i,1280x720p,720x480i, 720x480p,

720x576i, or 720x576p.

When HDMI is connected with DVI, there is picture display only and

no audio support.

快速使用與連線指南

重要事項

注意：本快速設置指南适用于多个不同的液晶電視型號。本手冊中介紹的所有功能（和圖例）不一定与您液晶電視

的功能完全相同。這是正常現象，不需要与經銷商聯系或請求維修。

警告：為防止火灾或電擊，不要使本產品遭受雨淋或受潮。

將液晶電視挂在牆上 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

設置電視頻道. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

液晶電視概覽. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

附件. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

安裝電池 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

遙控器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

天線電視. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

基本的有線電視連接 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

自動搜尋（設置頻道） . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

人工儲存電視頻道 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

分線盒（帶有 RF輸入╱輸出）. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

分線盒（帶有聲音╱視頻輸出）. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

VCR、DVD 播放机、或帶有 RCA 連接器的其它設備 . . . . . . . . . . . . . . . . 7

DVD 播放机或其它帶有COMPONENT 視頻連接器的視頻設備. . . . . . . . . . 7

AV 輸出 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

PC（顯示器）連接. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

帶有 HDMI 連接器的DVD 播放机. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

將液晶電視挂在牆上

快速使用與連線指南

EnglishArabic 中文

400mm

200mm

如果希望將其挂在牆上，請咨詢專業技術人員以了解正确的安裝方式。

制造商對于非專業人士進行的安裝不承担任何責任。

如果您要將液晶電視挂到牆上，底座是沒有必要安裝的。

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips LCD-Fernseher Handbücher

Philips

Philips 52PFL5604H Bedienungsanleitung

Philips

Philips 32PFL5237 Bedienungsanleitung

Philips

Philips 32PFL5332/45 Bedienungsanleitung

Philips

Philips 46PFL5705DV Bedienungsanleitung

Philips

Philips EasySuite 22HFL3232D Bedienungsanleitung

Philips

Philips 17PF9945/69S Bedienungsanleitung

Philips

Philips 26HF5545D Bedienungsanleitung

Philips

Philips 32PFL3406H Bedienungsanleitung

Philips

Philips 3000 LCD series Bedienungsanleitung

Philips

Philips CINEOS 42HF9385D Bedienungsanleitung

Philips

Philips 65PFL4909 Bedienungsanleitung

Philips

Philips 26HF5545D Bedienungsanleitung

Philips

Philips 67 4 Series Bedienungsanleitung

Philips

Philips MatchLine 32PF9996 Bedienungsanleitung

Philips

Philips 37PF7531D Bedienungsanleitung

Philips

Philips 37PFL9604H Bedienungsanleitung

Philips

Philips 42PFL7433S/60 Bedienungsanleitung

Philips

Philips 32PFL3403 Bedienungsanleitung

Philips

Philips T260XW03V3 Bedienungsanleitung

Philips

Philips 55PFL7505D Bedienungsanleitung

Philips

Philips PICO 19PFL3405/60 Bedienungsanleitung

Philips

Philips 42PFL3704D Bedienungsanleitung

Philips

Philips 21PT5027C/79 Bedienungsanleitung

Philips

Philips 37PF9631D Bedienungsanleitung

Beliebte LCD-Fernseher Handbücher anderer Marken

LG 32LC4R* Bedienungsanleitung

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Toshiba

Toshiba 57X3000A Bedienungsanleitung

Runco

Runco CX-52HD Bedienungsanleitung

Sharp

Sharp LC-32AX3H Bedienungsanleitung

Vizio

Vizio VO42LFHDTV10A Bedienungsanleitung

Insignia

Insignia NS-LCD32-09 Bedienungsanleitung

Sony

Sony WEGA KLV-27HR3 Bedienungsanleitung

Nexus

Nexus NX32031 Bedienungsanleitung

Zenith

Zenith Z32LC2D Bedienungsanleitung

Sony

Sony KDL-32S3000R - 32" Class Bravia S-series Digital Lcd... Bedienungsanleitung

Medion

Medion MEDION LIFE X14330 Bedienungsanleitung

Vizio

Vizio HDTV30A VW32L Bedienungsanleitung

Sharp

Sharp LC-24DV250K Bedienungsanleitung

SOYO

SOYO Dymond DYLT032A Bedienungsanleitung

Dynex

Dynex DX-L40-10A Kurzanleitung