Philips 170B4MG Bedienungsanleitung
Product Information
Product Features • Technical Specifications • Resolution & Preset Modes •
Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification •
Pin Assignment • Product Views • Physical Function
Product Features
170B4MG
z17-inch color LCD monitor with excellent display performance
zDual input - accepts DVI-D digital and VGA analog inputs
zEmbedded AC power supply
zFront firing speakers with 2x2W RMS stereo sound output
zAdvanced AUTO adjustment optimizes picture quality
zRotation for both portrait and landscape display
zLiner height adjustment for best viewing position
zAdjustable tilt and swivel function
zOptional self-powered USB hub
RETURN TO TOP OF THE PAGE
Technical Specifications*
LCD PANEL
• Type TFT LCD
• Screen size 17" / 43.2cm diagonal
• Pixel Pitch 0.264 x 0.264mm
• LCD Panel type 1280 x 1024 pixels
R.G.B. vertical stripe
Anti-glare polarizer, hard coated
• Effective viewing area 337.9 x 270.3 mm
• Display Colors 16M colors
SCANNING
Vertical refresh rate 56Hz-76Hz
Horizontal Frequency 30kHz-82kHz
VIDEO
• Video dot rate 135MHz
• Input impedance
- Video 75 ohm
Installstion and Operating Instructions
Exhibit 3
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Resolution & Preset Modes
- Sync 2.2K ohm
• Input signal levels 0.7 Vpp
• Sync input signal Separate sync
Composite sync
Sync on green
• Sync polarities Positive and negative
• Video interface Dual input: D-Sub (analog) and DVI-D (digital) are
available and user selectable
AUDIO
• Input signal level 0.7 Vpp
• Headphone out signal level 32 ohm 20+20mW
• Input signal connector 3.5mm mini jack
• Loudspeaker 4W Stereo Audio (2W/channel RMS x2, 200 Hz-12 kHz, 8
ohm, THD=10%)
MICROPHONE
• Sensitivity -55dB re 1V/ubar at 1kHz
• Output impedance 2.2K ohm max.
• Directivity -5dB at 180°
• Frequency range 300Hz-3kHz
Optical characteristics
• Contrast ratio: 400 (typ.)
• Brightness: 260 cd/m2(typ.)
• Peak contrast angle 6 o'clock
• White Chromatcity: x: 0.283 y: 0.297 (at 9300°K)
x: 0.313 y: 0.329 (at 6500°K)
• Viewing Angle:
(C/R>5)
Upper >80° (typ.)
Lower >80° (typ.)
Left >80 ° (typ.)
Right >80 ° (typ.)
• Response time <25ms (typ.)
• Maximum 1280 x 1024 at 75Hz
• Recommended 1280 x 1024 at 60Hz
RETURN TO TOP OF THE PAGE
Automatic Power Saving
If you have VESA's DPMS compliance display card or software installed in your PC, the
monitor can automatically reduce its power consumption when not in use. And if an input from
a keyboard, mouse or other input device is detected, the monitor will automatically "wake up".
The following table shows the power consumption and signaling of this automatic power saving
features:
33 user definable modes
15 factory preset modes:
H. freq (kHz) Resolution V. freq (Hz)
31.5 640*350 70
31.5 720*400 70
31.5 640*480 60
35.0 640*480 67
37.5 640*480 75
35.2 800*600 56
37.9 800*600 60
46.9 800*600 75
49.7 832*624 75
48.4 1024*768 60
60.0 1024*768 75
69.0 1152*870 75
71.8 1152*900 76
63.9 1280*1024 60
80 1280*1024 75
Power Management Definition
VESA Mode Video H-sync V-sync Power
Used LED
color
ON Active Yes Yes < 40 W
(typ.) Green
OFF Blanked No No < 1 W Amber
This monitor is ENERGY STAR®compliant. As an ENERGY STAR®Partner, PHILIPS
has determined that this product meets the ENERGY STAR®guidelines for energy
RETURN TO TOP OF THE PAGE
Physical Specifications
* These information are subject to change without notice.
* Resolution 1280x1024, standard size, contrast max., brightness 50%, 9300° K, full white
pattern, without audio/USB.
RETURN TO TOP OF THE PAGE
Pin Assignment
1. The digital only connector contains 24 signal contacts organized in three rows of eight
contacts. Signal pin assignments are listed in the following table:
efficiency.
• Dimension (WxHxD) 375 x 413 x 184 mm (incl. Pedestal)
• Weight 6.3 Kg
• Tilt / Swivel 0° ~ 35° / + - 175°
• Height adjustment rang 50mm
• Portrait display 90° rotation counter clockwise
• Power supply 100 — 240 VAC, 50/60 Hz
• Power consumption 40 W* (typ.)
• Temperature 5° C to 35° C (operating)
-20° C to 60° C (storage)
• Relative humidity 20% to 80%
• System MTBF 50K hrs (including CCFL 40K hrs)
Pin
No. Signal
Assignment
Pin
No. Signal
Assignment
Pin
No. Signal
Assignment
1T.M.D.S. Data2- 9T.M.D.S. Data1- 17 T.M.D.S. Data0-
2T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+
3T.M.D.S. Data2/4
Shield 11 T.M.D.S. Data1/3
Shield 19 T.M.D.S. Data0/5
Shield
4No connect 12 No connect 20 No connect
5No connect 13 No connect 21 No connect
6DDC Clock 14 +5V Power 22 T.M.D.S. Clock
Shield
7DDC Data 15 Ground (for +5V) 23 T.M.D.S. Clock+
2. The 15-pin D-sub connector (male) of the signal cable:
RETURN TO TOP OF THE PAGE
Product Views
Follow the links to see various views of the monitor and its components.
Front View Product Description
8No connect 16 Hot Plug Detect 24 T.M.D.S. Clock-
Pin
No. Assignment
Pin
No. Assignment
1Red video input 9+5V
2Green video input/SOG 10 Logic ground
3Blue video input 11 Identical output -
connected to pin 10
4Sense (GND) 12 Serial data line (SDA)
5Not connected 13 H. Sync / H+V
6Red video ground 14 V. Sync (VCLK for DDC)
7Green video ground 15 Data clock line (SCL)
8Blue video ground
RETURN TO TOP OF THE PAGE
Physical Function
1) Tilt
2) Swivel
3) Height adjustment
4) Portrait display
Turn monitor from landscape view to portrait view
4.1) Tilt the monitor body at an angle
4.2) Rotate the monitor body 90 degrees counter clockwise.
Installing your LCD Monitor
Your LCD Monitor : Front View Product Description • Connecting to Your PC •
Remove and re-install the base • Getting Started • Optimizing Performance •
Accessories (optional)
Front View Product Description
UP and DOWN buttons are used when adjusting the OSD of your
monitor
LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used
in adjusting the OSD of your monitor.
Signal inputs selective hotkeys. Allows user to switch between two video
connectors (D-Sub & DVI-D)
BRIGHTNESS hotkey. When the UP and DOWN arrow buttons are
pressed, the adjustment controls for the BRIGHTNESS will show up.
OK button which when pressed will take you to the OSD controls
POWER button switches your monitor on
Automatically adjust the horizontal position, vertical position, phase and
clock setting.
RETURN TO TOP OF THE PAGE
Side View
1. Audio power on/off and volulme adjustment
2. Audio power LED
3. BASS on/off
4. Built-in Mic
5. Mute on/off
1. Headphone Jack
2. Microphone Jack
RETURN TO TOP OF THE PAGE
Rear View
1. Audio in
2. Mic out
3. DC 12V in
1. DC 12V out for Philips Multimedia Base only
Andere Handbücher für 170B4MG
2
Inhaltsverzeichnis
Andere Philips Monitor Handbücher
Philips
Philips 105B1399 Bedienungsanleitung
Philips
Philips 221S3UCS/00 Bedienungsanleitung
Philips
Philips 170C5BS Bedienungsanleitung
Philips
Philips 220VW9FB Bedienungsanleitung
Philips
Philips 225P1 Bedienungsanleitung
Philips
Philips BDL4231CS Bedienungsanleitung
Philips
Philips 109P40/40 Montage- und Bedienungsanleitung
Philips
Philips 105S2 CM23 GSIII Bedienungsanleitung
Philips
Philips C500 Bedienungsanleitung
Philips
Philips 221V8 Bedienungsanleitung
Philips
Philips 170S7FG/00 Bedienungsanleitung
Philips
Philips Brilliance 221P3LPYES Bedienungsanleitung
Philips
Philips 220CW9FB Bedienungsanleitung
Philips
Philips 276B1 Bedienungsanleitung
Philips
Philips Brilliance 231B7 Bedienungsanleitung
Philips
Philips 233V5LSB Bedienungsanleitung
Philips
Philips 225P1 Bedienungsanleitung
Philips
Philips 150V5FG Bedienungsanleitung
Philips
Philips 200WS8FS/00 Bedienungsanleitung
Philips
Philips S-line 272S1AE Bedienungsanleitung
