Philips 193EI Bedienungsanleitung

e-Manual

Philips LCD Monitor Electronic User’s Manual

file:///D|/songaiyu/193E1-1A1D%20EDFU/193E1-1A1D%20EDFU/lcd/manual/ENGLISH/193E1/INDEX.HTM2009/7/6 下午 03:16:15

Safety and Troubleshooting Information

• Safety Precautions and

Maintenance

• FAQs

• Troubleshooting

• Regulatory Information

• Other Related Information

Safety and Troubleshooting Information

Safety precautions and maintenance

WARNING: Use of controls, adjustments or procedures other than

those specified in this documentation may result in exposure to shock,

electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor:

Operation:

●Keep the monitor out of direct sunlight and away from stoves or any other heat source.

●Remove any object that could fall into ventilation holes or prevent proper cooling of the

monitor’s electronics.

●Do not block the ventilation holes on the cabinet.

●When positioning the monitor, make sure the power plug and outlet are easily accessible.

●If turning off the monitor by detaching the power cable or DC power cord, wait for 6

seconds before attaching the power cable or DC power cord for normal operation.

●Please use approved power cord provided by Philips all the time. If your power cord is

missing, please contact with your local service center. (Please refer to Customer Care

Consumer Information Center)

●Do not subject the LCD monitor to severe vibration or high impact conditions during

operation.

●Do not knock or drop the monitor during operation or transportation.

Maintenance:

●To protect your display from possible damage, do not put excessive pressure on the LCD

panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by

placing your hand or fingers on the LCD panel.

●Unplug the monitor if you are not going to use it for an extensive period of time.

●Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be

wiped with a dry cloth when the power is off. However, never use organic solvent, such

as, alcohol, or ammonia-based liquids to clean your monitor.

●To avoid the risk of shock or permanent damage to the set, do not expose the monitor to

dust, rain, water, or excessive moisture environment.

file:///D|/songaiyu/193E1-1A1D%20EDFU/193E1-1A1D%20EDFU/lcd/manual/ENGLISH/193E1/safety/safety.htm (1 of 2)2009/7/6 下午 03:16:33

Safety and Troubleshooting Information

●If your monitor gets wet, wipe it with dry cloth as soon as possible.

●If foreign substance or water gets in your monitor, please turn the power off immediately

and disconnect the power cord. Then, remove the foreign substance or water, and send

it to the maintenance center.

●Do not store or use the LCD monitor in locations exposed to heat, direct sunlight or

extreme cold.

●In order to maintain the best performance of your monitor and use it for a longer lifetime,

please use the monitor in a location that falls within the following temperature and

humidity ranges.

❍Temperature: 0-40°C 32-95°F

❍Humidity: 20-80% RH

Service:

●The casing cover should be opened only by qualified service personnel.

●If there is any need for any document for repair or integration, please contact with your

local service center. (please refer to the chapter of "Consumer Information Center")

●For transportation information, please refer to "Physical Specifications".

●Do not leave your monitor in a car/trunk under direct sun light.

Consult a service technician if the monitor does not operate normally, or you are

not sure what procedure to take when the operating instructions given in this

manual have been followed.

RETURN TO TOP OF THE PAGE

file:///D|/songaiyu/193E1-1A1D%20EDFU/193E1-1A1D%20EDFU/lcd/manual/ENGLISH/193E1/safety/safety.htm (2 of 2)2009/7/6 下午 03:16:33

FAQs (Frequently Asked Questions)

• Safety and Troubleshooting

• General FAQs

• Screen Adjustments

• Compatibility with Other

Peripherals

• LCD Panel Technology

• Ergonomics, Ecology and

Safety Standards

• Troubleshooting

• Regulatory Information

• Other Related Information

FAQs (Frequently Asked Questions)

General FAQs

Q: When I install my monitor what should I do if the screen shows 'Cannot display this video

mode'?

A: Recommended video mode for Philips 19"W: 1440 x 900 @60Hz.

1. Unplug all cables, then connect your PC to the monitor that you used

previously.

2. In the Windows Start Menu, select Settings/Control Panel. In the Control Panel

Window, select the Display icon. Inside the Display Control Panel, select the

'Settings' tab. Under the setting tab, in box labeled 'desktop area', move the

slidebar to 1440 x 900 pixels (19"W).

3. Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK.

4. Restart your computer and repeat step 2 and 3 to verify that your PC is set at

1440 x 900@60Hz (19"W).

5. Shut down your computer, disconnect your old monitor and reconnect your

Philips LCD monitor.

6. Turn on your monitor and then turn on your PC.

Q: What does 'refresh rate' mean in connection with an LCD monitor?

A: The refresh rate is of much less relevance for LCD monitors. LCD monitors display

a stable, flicker-free image at 60Hz. There is no visible difference between 85Hz and

60Hz.

Q: What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and .

icm)?

A: These are the driver files for your monitor. Follow the instructions in your user

manual to install the drivers. Your computer may ask you for monitor drivers (.inf and .

file:///D|/songaiyu/193E1-1A1D%20EDFU/193E1-1A1D%20EDFU/lcd/manual/ENGLISH/193E1/safety/saf_faq.htm (1 of 7)2009/7/6 下午 03:16:56

FAQs (Frequently Asked Questions)

icm files) or a driver disk when you first install your monitor. Follow the instructions to

insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .

icm files) will be installed automatically.

Q: How do I adjust the resolution?

A: Your video card/graphic driver and monitor together determine the available

resolutions. You can select the desired resolution under Windows® Control Panel

with the "Display properties".

Q: What if I get lost when I am making monitor adjustments?

A: Simply press the MENU button, then select 'Reset' to recall all of the original

factory settings.

Q: What is the Auto function?

A: The AUTO adjustment key restores the optimal screen position, phase and clock

settings by pressing of a single button – without the need to navigate through OSD

(On Screen Display) menus and control keys.

Note: Auto function is available in selected models only.

Q: My Monitor has no power (Power LED does not light up). What should I do?

A: Make sure the AC power cord is connected between the monitor and AC outlet,

and click a key on keyboard/mouse to wake up the PC.

Q: Will the LCD monitor accept an interlaced signal under PC models?

A: No. If an Interlace signal is used, the screen displays both odd and even horizontal

file:///D|/songaiyu/193E1-1A1D%20EDFU/193E1-1A1D%20EDFU/lcd/manual/ENGLISH/193E1/safety/saf_faq.htm (2 of 7)2009/7/6 下午 03:16:56

FAQs (Frequently Asked Questions)

scanning lines at the same time, thus distorting the picture.

Q: What does the Refresh Rate mean for LCD?

A: Unlike CRT display technology, in which the speed of the electron beam is swept

from the top to the bottom of the screen determines flicker, an active matrix display

uses an active element (TFT) to control each individual pixel and the refresh rate is

therefore not really applicable to LCD technology.

Q: Will the LCD screen be resistant to scratches?

A: A protective coating is applied to the surface of the LCD, which is durable to a

certain extent (approximately up to the hardness of a 2H pencil). In general, it is

recommended that the panel surface is not subject to any excessive shocks or

scratches.

Q: How should I clean the LCD surface?

A: For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use

isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone,

hexane, etc.

Q:Can I change the color setting of my monitor?

A:Yes, you can change your color setting through OSD control as the following

procedures,

1. Press "MENU" to show the OSD (On Screen Display) menu

2. Press "Arrow" to select the option "color" then press "MENU" to enter color setting,

there are five settings as below.

a. 6500K; this setting features the panel closed to red-white color tone.

b. 9300K; this setting features the panel closed to blue-white color tone.

file:///D|/songaiyu/193E1-1A1D%20EDFU/193E1-1A1D%20EDFU/lcd/manual/ENGLISH/193E1/safety/saf_faq.htm (3 of 7)2009/7/6 下午 03:16:56

FAQs (Frequently Asked Questions)

c. User Define; the user can choose his/her preference color setting by

adjusting red, green, blue color.

d. sRGB; this is a standard setting for ensuring correct exchange of

colors between different device (e.g. digital cameras, monitors, printers,

scanners, etc.)

*A measurement of the color of light radiated by an object while it is being heated. This measurement

is expressed in terms of absolute scale, (degrees Kelvin). Lower Kevin temperatures such as 2004K

are red; higher temperatures such as 9300K are blue. Neutral temperature is white, at 6504K.

Q: Can the Philips LCD Monitor be mounted on the wall?

A: Yes. Philips LCD monitors have this optional feature. For standard VESA mount

holes on the rear cover allows the user to mount the Philips monitor on most of the

VESA standard arms or accessories. We recommend to contact your Philips sales

representative for more information.

RETURN TO TOP OF THE PAGE

Screen Adjustments

Q: How do LCDs compare to CRTs in terms of radiation?

A: Because LCDs do not use an electron gun, they do not generate the same amount

of radiation at the screen surface.

RETURN TO TOP OF THE PAGE

Compatibility with other Peripherals

Q: Are Philips LCD monitors Plug-and-Play?

A: Yes, the monitors are Plug-and-Play compatible with Windows® 95, 98, 2000, XP

file:///D|/songaiyu/193E1-1A1D%20EDFU/193E1-1A1D%20EDFU/lcd/manual/ENGLISH/193E1/safety/saf_faq.htm (4 of 7)2009/7/6 下午 03:16:56

FAQs (Frequently Asked Questions)

and Vista.

RETURN TO TOP OF THE PAGE

LCD Panel Technology

Q: What is a Liquid Crystal Display?

A: A Liquid Crystal Display (LCD) is an optical device that is commonly used to

display ASCII characters and images on digital items such as watches, calculators,

portable game consoles, etc. LCD is the technology used for displays in notebooks

and other small computers. Like light-emitting diode and gas-plasma technologies,

LCD allows displays to be much thinner than cathode ray tube (CRT) technology.

LCD consumes much less power than LED and gas-displays because it works on the

principle of blocking light rather than emitting it.

Q: What differentiates passive matrix LCDs from active matrix LCDs?

A: An LCD is made with either a passive matrix or an active matrix display grid. An

active matrix has a transistor located at each pixel intersection, requiring less current

to control the luminance of a pixel. For this reason, the current in an active matrix

display can be switched on and off more frequently, improving the screen refresh time

(your mouse pointer will appear to move more smoothly across the screen, for

example). The passive matrix LCD has a grid of conductors with pixels located at

each intersection in the grid.

Q: What are the advantages of TFT LCD compared with CRT?

A: In a CRT monitor, a gun shoots electrons and general light by colliding polarized

electrons on fluorescent glass. Therefore, CRT monitors basically operate with an

analog RGB signal. A TFT LCD monitor is a device that displays an input image by

operating a liquid crystal panel. The TFT has a fundamentally different structure than

a CRT: Each cell has an active matrix structure and independent active elements. A

TFT LCD has two glass panels and the space between them is filled with liquid

crystal. When each cell is connected with electrodes and impressed with voltage, the

molecular structure of the liquid crystal is altered and controls the amount of inlet

file:///D|/songaiyu/193E1-1A1D%20EDFU/193E1-1A1D%20EDFU/lcd/manual/ENGLISH/193E1/safety/saf_faq.htm (5 of 7)2009/7/6 下午 03:16:56

FAQs (Frequently Asked Questions)

lighting to display images. A TFT LCD has several advantages over a CRT, since it

can be very thin and no flickering occurs because it does not use the scanning

method.

Q: What kind of wide-angle technology is available? How does it work?

A: The TFT LCD panel is an element that controls/displays the inlet of a backlight

using the dual-refraction of a liquid crystal. Using the property that the projection of

inlet light refracts toward the major axis of the liquid element, it controls the direction

of inlet light and displays it. Since the refraction ratio of inlet light on liquid crystal

varies with the inlet angle of the light, the viewing angle of a TFT is much narrower

than that of a CRT. Usually, the viewing angle refers to the point where the contrast

ration is 10. Many ways to widen the viewing angle are currently being developed and

the most common approach is to use a wide viewing angle film, which widens the

viewing angle by varying the refraction ratio. IPS (In Plane Switching) or MVA (Multi

Vertical Aligned) is also used to give a wider viewing angle.

Q: Why is there no flicker on an LCD Monitor?

A: Technically speaking, LCDs do flicker, but the cause of the phenomenon is

different from that of a CRT monitor -- and it has no impact of the ease of viewing.

Flickering in an LCD monitor relates to usually undetectable luminance caused by the

difference between positive and negative voltage. On the other hand, CRT flickering

that can irritate the human eye occurs when the on/off action of the fluorescent object

becomes visible. Since the reaction speed of liquid crystal in an LCD panel is much

slower, this troublesome form of flickering is not present in an LCD display.

Q: Why is an LCD monitor virtually low of Electro Magnetic Interference?

A: Unlike a CRT, an LCD monitor does not have key parts that generate Electro

Magnetic Interference, especially magnetic fields. Also, since an LCD display utilizes

relatively low power, its power supply is extremely quiet.

RETURN TO TOP OF THE PAGE

file:///D|/songaiyu/193E1-1A1D%20EDFU/193E1-1A1D%20EDFU/lcd/manual/ENGLISH/193E1/safety/saf_faq.htm (6 of 7)2009/7/6 下午 03:16:56

FAQs (Frequently Asked Questions)

Ergonomics, Ecology and Safety Standards

Q: What is the CE mark?

A: The CE (Conformité Européenne) mark is required to be displayed on all regulated

products offered for sale on the European market. This 'CE' mark means that a

product complies with the relevant European Directive. A European Directive is a

European 'Law' that relates to health, safety, environment and consumer protection,

much the same as the U.S. National Electrical Code and UL Standards.

Q: Does the LCD monitor conform to general safety standards?

A: Yes. The specification page provides detailed data on safety standards.

More information is provided in the Regulatory Information section.

RETURN TO TOP OF THE PAGE

file:///D|/songaiyu/193E1-1A1D%20EDFU/193E1-1A1D%20EDFU/lcd/manual/ENGLISH/193E1/safety/saf_faq.htm (7 of 7)2009/7/6 下午 03:16:56

Inhaltsverzeichnis

Andere Philips Monitor Handbücher

Philips

Philips 220SW8FS1 Bedienungsanleitung

Philips

Philips Brilliance 240B4 Bedienungsanleitung

Philips

Philips Momentum 439M1 Bedienungsanleitung

Philips

Philips Brilliance 200P6ES/27 Bedienungsanleitung

Philips

Philips Brilliance 241B7QUPEB Bedienungsanleitung

Philips

Philips 242E2 Bedienungsanleitung

Philips

Philips 220BW9 - Brilliance - 22" LCD Monitor Montage- und Bedienungsanleitung

Philips

Philips 220S2SS Bedienungsanleitung

Philips

Philips 240S4QMB Bedienungsanleitung

Philips

Philips MWE1160T Bedienungsanleitung

Philips

Philips Brilliance 240PW9EB/00 Bedienungsanleitung

Philips

Philips M32 107T4 GS_3 Bedienungsanleitung

Philips

Philips 109B60 Bedienungsanleitung

Philips

Philips 223V5LSB Bedienungsanleitung

Philips

Philips 246EL2SBH/00 Bedienungsanleitung

Philips

Philips 245E1 Bedienungsanleitung

Philips

Philips BDH4241V/27 Bedienungsanleitung

Philips

Philips 220CW9FB Bedienungsanleitung

Philips

Philips Brilliance 439P1 Bedienungsanleitung

Philips

Philips Brilliance 221P3LPYES Bedienungsanleitung

Philips

Philips 220CW8FB/69 Bedienungsanleitung

Philips

Philips Brilliance 329P1 Bedienungsanleitung

Philips

Philips 150S5FB Bedienungsanleitung

Philips

Philips 225B1CB - Brilliance - 22" LCD Monitor Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

LG M1950D-PZ Bedienungsanleitung

Sceptre

Sceptre D40 Bedienungsanleitung