Philips Norelco NT5600/42 Bedienungsanleitung

Philips Norelco Nose trimmer series 5000Nose trimmer 5000, NT5600/42

Frequently Asked Questions

Click on a question to go directly to the answer:

1. Can I rinse my Philips Groomer with water?

2. Where is the model and serial number of my Philips Male Groomer?

3. How do I use my Philips Nose Trimmer?

4. How do I charge my Philips Groomer?

1. Can I rinse my Philips Groomer with water?

You can rinse your Philips Groomer or Trimmer only if it is waterproof. You can check that by looking

at the signs and symbols printed on your groomer's box or body.

Crossed out tap symbol

If you see a crossed out tap symbol on the box or body of your groomer, it means that the groomer is

not washable and should be cleaned without water.

Tap symbol

A tap symbol printed on your grooming device indicates that it is washable and its parts (cutters and

combs) can be cleaned with water. However, this does not mean that you can use it to clip or trim

your hair in the shower or bath.

Bath or shower symbol

If you see a shower or bath symbol printed on your groomer, it means that your device is waterproof.

It can be safely cleaned with water and used while taking a shower or a bath. For safety reasons,

these waterproof groomers can only be used cordless and will not turn on if they are connected to

the power supply.

Note: Please keep in mind that the symbols on your Philips Groomer vary per model type. If you are

still unsure whether it is safe to clean your Philips Groomer with water then please contact us for

further support.

2. Where is the model and serial number of my Philips Male Groomer?

If you own a Philips Trimmer or Hair Clipper and want to know where its model and serial number is

located, please check the information below.

The model number is often needed when registering your product or when looking for information

about your specific model. The serial number can be used to identify the production date of your

product.

Back of the device

For some grooming devices like the OneBlade, the model and serial numbers are located on the back

of the handle. The model number usually starts with 2 alphabets followed by 4 digits, e.g. QP2540.

The serial number has the format of YYWW (Year and week).

Top of the device

Some hair clippers and beard trimmers have the model number located on the top of the device, just

below the cutting teeth. The serial number is usually located under the cutting unit. Try pulling off

the upper part of your groomer and see if you can find 4 digits in the format of YYWW in there, e.g.

1823.

Inside the handle

For nose trimmers the model and serial number is located inside the battery compartment. Remove

the lower part of the handle of your trimmer to see the battery compartment. The model and serial

number will be printed over there.

3. How do I use my Philips Nose Trimmer?

The Philips Nose Trimmer is a multifunctional device, which can be used to trim different areas of

your face with its attachments. Watch this video to see how to use this trimmer. For detailed

instructions see the sections below.

Nose and ear trimming

For this device, the same cutting unit can be used to trim both your nose and ear hair.

Before trimming, make sure your device is clean and your nose and ear are free from any mucus or

wax.

After using the nose trimmer, it is normal to observe remaining hairs. The hairs will be cut to a short

length so the remaining hairs will continue to provide safe and comfortable protection (as a defense

system to keep particles out of the body).

Attaching nose trimmer attachment

Philips MultiGroomers which come with a rotary nose trimmer attachment that can easily be

removed and attached.

1. To take off the nose trimmer attachment, place your finger on the back of the attachment and

push it upwards off the handle.

2. To attach the nose trimmer attachment, insert the lug of the attachment into the guiding slot at

the front and push the back of the attachment onto the product ('click').

Attaching nose trimmers

Philips Nose trimmers come with a nose trimmer, and sometimes also a detail trimmer head that can

also easily be removed and attached.

1. To take off the nose trimmer or detail trimmer head, firmly grip the handle of your device, hold

the attachment, and turn it counterclockwise, until the “^” triangle indications on the handle and

the head are aligned. Then just pull the attachment off.

2. To attach the nose trimmer or trimming head, place it on the handle aligning both triangle “^”

indications. Then turn it clockwise until the indicator triangle “^” and line “|” indication on the

body and attachment are aligned and the attachment is fixed.

Trimming nose hair

1. Turn the device on and insert the cutting element inside your nose. Do not insert the trimming

head more than 5 mm into your nostrils.

2. Slowly move the trimming head around inside each nostril. Make sure that the side with the

trimming teeth touches the hair.

3. Clean thoroughly after each use.

Trimming ear hair

1. Turn the device on and slowly move the trimming head along the rim of the ear to remove any

hair that stick out. Make sure that the side with the trimming teeth touches the hair.

2. Carefully insert the trimming head into the outer ear channel. Do not insert the trimming head

more than 5 mm into your ear channel.

3. Turn the trimming head around to remove all unwanted hair from your outer ear channel.

4. Clean thoroughly after each use.

Eyebrow trimming attachment

Depending on your model, Philips nose trimmers can come with eyebrow and detailer combs. The

combs come in the following lengths and designs:

Eyebrow comb S = remaining hair length 3mm or 0.12”

Eyebrow comb L = remaining hair length 5mm or 0.19”

1. Comb your eyebrows in the direction of hair growth.

2. Make sure the product is switched off. Slide the eyebrow comb onto the trimming head. The short

eyebrow comb trims the hair to a length of 3 mm. The long comb can trim the hair to a length of

5mm.

3. Switch on your device.

4. Move the comb over the eyebrow from the outer tip of the eyebrow towards the base of the nose

(against the direction of hair growth).

5. Clean thoroughly after each use.

Detailer trimming

If your product comes with a detail trimming head, you can use this to shape and maintain your

beard, sideburns and neck hair.

To trim most effectively, place the flat part of comb on your skin and move the trimmer slowly and

with light pressure against direction of hair growth.

Detailer combs come in the following lengths and designs:

Detailer comb M = remaining hair length 3mm or 0.12”

Detailer comb L = remaining hair length 5mm or 0.19”

Slide the detailer comb onto the front of detailer trimmer head and push down the back until you

hear a click.

Note: For first time use always use the detail trimming head with its comb. After that you may use

this attachment with or without the comb. Keep in mind that when you use the precision trimmer

without the comb it will trim every hair it touches.

4. How do I charge my Philips Groomer?

Follow our instructions below on how to charge your Philips Groomers, Beard Trimmers and Hair

Clippers.

Charging instructions for Philips Groomers

You should charge your Philips Male Grooming devices when the charging indicator on the body of

your groomer signals low battery. If your device does not have a battery indicator on it, then charge

it whenever the groomer is working slower than usual.

1. Insert the charging plug in to you grooming device's charging socket. Make sure the plug's shape

matches the socket and is completely inserted. Do not force it in.

2. The charging indicator on your device will start flashing to indicate that the groomer is charging.

Once the groomer is fully charged, the charging indicator lights up continuously for approximately

30 minutes and then automatically turns off to save energy.

3. After charging, unplug the charger from the power outlet and the groomer. Your groomer is now

ready to use.

For most groomers, normal charging time is between 1 to 8 hours. If you are charging your device for

the first time, we recommend letting it charge for at least 3 hours. Check your user manual for

specific charging instructions of your model.

Charging your Philips Groomer with a charging stand

If your Philips Groomer comes with a charging station, follow the instructions below on how to

charge it.

1. Connect the charging station to a working power outlet.

2. Place your groomer in the charging stand. You may see a light on your groomer or charging stand

to indicate that the charging process has begun.

3. Once the groomer is fully charged, unplug the charging stand and continue using your groomer.

Battery operated devices

Some Philips grooming devices run on disposable AA batteries. To charge these devices you need to

ensure that the disposable batteries have not run out. In case your trimmer does not switch on or

runs slower than before, its time to replace the batteries.

Only use the disposable batteries as specified in your user manual. Do not mix different types of or

old and new batteries. When putting in new batteries make sure the + and - poles of the battery

point in the right direction.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Körperpflegeprodukt Handbücher

Philips

Philips HB554/02 Bedienungsanleitung

Philips

Philips HP36I4 Bedienungsanleitung

Philips

Philips BRI947 Bedienungsanleitung

Philips

Philips Nose & Ear Trimmer NT9110 Bedienungsanleitung

Philips

Philips HP5241 Bedienungsanleitung

Philips

Philips Lumea precision plus Bedienungsanleitung

Philips

Philips HB406/01 Bedienungsanleitung

Philips

Philips VisaPure Advanced SC53 Series Bedienungsanleitung

Philips

Philips VisaPure SC5275 Bedienungsanleitung

Philips

Philips HP4550/00 Bedienungsanleitung

Philips

Philips HeartStart M5066A Bedienungsanleitung

Philips

Philips AVENT SCF154/50 Bedienungsanleitung

Philips

Philips Suncare HB556 Bedienungsanleitung

Philips

Philips HB875/01 Bedienungsanleitung

Philips

Philips PR3743 Bedienungsanleitung

Philips

Philips Bodyvital Bedienungsanleitung

Philips

Philips PR3743 Bedienungsanleitung

Philips

Philips BSC301 Bedienungsanleitung

Philips

Philips Airstylist quattro 300 Bedienungsanleitung

Philips

Philips EnergyUp HF3431 Bedienungsanleitung

Philips

Philips Lumea Bedienungsanleitung

Philips

Philips DreamWear Bedienungsanleitung

Philips

Philips Nose & Ear Trimmer NT9110 Stücklistenhandbuch

Philips

Philips Niplette SCF152/02 Bedienungsanleitung

Beliebte Körperpflegeprodukt Handbücher anderer Marken

Pretika

Pretika ST102 Bedienungsanleitung

Beurer

Beurer FC 76 Bedienungsanleitung

Pebble Grey

Pebble Grey 500.40.70-75 Bedienungsanleitung

PUSH

PUSH ortho Bedienungsanleitung

Dermlite

Dermlite DL3N Bedienungsanleitung

DERMAPEN

DERMAPEN SEMI Bedienungsanleitung

HiB

HiB Spectre 50 Bedienungsanleitung

Carex

Carex SunLite Bedienungsanleitung

Roper Rhodes

Roper Rhodes Intense Stücklistenhandbuch

Interacoustics

Interacoustics Titan IMP440 Bedienungs- und Sicherheitshinweise

ReTrak

ReTrak VS001 Bedienungsanleitung

LED Technologies

LED Technologies dpl PAIN RELIEF Joint Wrap Bedienungsanleitung

Casa Lusso

Casa Lusso MVL1000x450PR Bedienungsanleitung

Quoizel

Quoizel QR3326 Montageanleitung

BERTSCHAT

BERTSCHAT HEATED HOODIE PRO - DUAL HEATING Bedienungsanleitung

Beurer

Beurer EM 37 Bedienungsanleitung

ACP

ACP OMNISTAND Bedienungsanleitung

Scarlett

Scarlett VitaSpa SC-CA304PS11 Bedienungsanleitung