Philips BT6600 Bedienungsanleitung
BT6600
Register your product and get support at
www.philips.com/support
User manual
1EN
Contents
1 Important 1
2 Your Bluetooth speaker 2
Introduction 2
What's in the box 2
Overview of the speaker 3
3 Get started 4
Power supply 4
Turn on/o 5
4 Use Bluetooth devices 6
Connect a device 6
Connect three Bluetooth
devices simultaneously 7
Play from Bluetooth device 7
Control your phone call 7
Clear pairing information 7
5 Other features 8
Listen to an external device 8
Charge your device 8
Adjust volume 8
6 Specications 9
7 Troubleshooting 10
General 10
About Bluetooth device 10
8 Notice 11
Care of the environment 11
Trademark notice 11
1EN
1 Important
Warning
•Never remove the casing of this speaker.
•Never place this speaker on other electrical
equipment.
•Keep this speaker away from direct
sunlight, naked ames or heat.
•Make sure that you always have easy
access to the power cord, plug, or adaptor
to disconnect the speaker from the power.
• Make sure that there is enough
free space around the speaker for
ventilation.
• After use under humid
circumstance, immediately clean
the product with a soft dry cloth.
• The battery shall not be exposed
to excessive heat such as sunshine,
re or the like.
• The adapter shall not be exposed
to dripping or splashing.
• No objects lled with liquids shall
be placed on the adapter.
• Use only power supplies listed in
the user manual.
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect
device, the disconnect device shall
remain readily operable.
Note
• The type plate is located on the bottom of
the apparatus.
2EN
2 Your
Bluetooth
speaker
Congratulations on your purchase, and
welcome to Philips! To fully benet from
the support that Philips oers, register
your product at www.philips.com/
welcome.
Introduction
This speaker has passed splash-proof
test (IPX4) and can be used near water.
With this speaker, you can enjoy audio
from Bluetooth-enabled devices or
other external devices.
What's in the box
Check and identify the contents of your
package:
• Speaker
• USB adapter head
• USB cable for charging (X 2)
• Charging base
• Printed materials
Quick Start Guide
X2
3EN
Overview of the speaker
a /MULTIPAIR
• Enter Bluetooth pairing mode.
• Disconnect Bluetooth
connection.
• Clear Bluetooth pairing
information.
• Answer or reject an incoming
call.
• End the current phone call.
• Transfer the call to your mobile
device.
b NFC
• Connect a NFC compatible
device through Bluetooth.
c LED indicator
• Indicate battery or Bluetooth
connection status.
d Volume knob ( )
• Turn the speaker on or o.
• Adjust volume.
c
d
e
e
f
g
a
b
e DC IN
• Charge the built-in battery.
f AUDIO IN
• Connect an external audio
device.
g CHARGING (5 V 2.1 A)
• Charge your mobile device.
4EN
3 Get started
Always follow the instructions in this
chapter in sequence.
Power supply
Either AC power or battery can be used
as power supply of this product.
Option 1: Battery power
The speaker can operate on the built-in
rechargeable battery.
Note
•Rechargeable battery has a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
•It takes approximately four hours to fully
charge the battery.
•The LED indicator ashes red when the
battery is low.
To recharge the built-in battery:
• Dock the speaker into the charging
base, then connect the speaker to
AC power by using the supplied
adaptor; or
• Connect the speaker to AC power
by using the supplied adaptor
directly.
Battery status LED indicator
Under charging Solid red（in
power-o mode）;
Flashing red for
three seconds,
then turn blue (in
power-on mode)
Fully charged O（in power-o
mode）
Option 2: AC power
Caution
•Risk of product damage! Make sure that the
power voltage corresponds to the voltage
printed on the back or underside of the
speaker.
•Risk of electric shock! When you unplug the
AC adapter, always pull the plug from the
socket. Never pull the cord.
Connect the adapter to:
• the DC IN socket on the speaker or
on the charging base;
• the power outlet.
5EN
Turn on/o
To turn the speaker on or o, rotate the
knob clockwise or anticlockwise until
you hear a click.
» When the speaker is turned on, the
blue LED indicator ashes.
» When the speaker is turned o, the
blue LED indicator lights o.
OFF
ON
Note
•If the battery is low, the red LED indicator
ashes.
Switch to standby mode
When there is no operation and
audio ouput for 15 minutes, the
speaker switches to standby mode
automatically.
Note
•To wake up the speaker from standby
mode, press or tap the NFC tag on the
top of the speaker with your Bluetooth
device.
6EN
4 Use
Bluetooth
devices
With this speaker, you can listen to
audio from Bluetooth-enabled devices
and control the incoming call through
Bluetooth.
Connect a device
Note
•Make sure that Bluetooth function is
enabled on your device, and your device is
set as visible to all other Bluetooth devices.
•Any obstacle between this speaker
and a Bluetooth device can reduce the
operational range.
•Keep away from any other electronic
device that may cause interference.
•The operational range between this
speaker and a Bluetooth device is
approximately 10 meters (30 feet).
Option 1: Connect a device
through NFC
Near Field Communication (NFC) is a
technology that enables short-range
wireless communication between
various NFC compatible devices, such
as mobile phones and IC tags.
If your Bluetooth device supports NFC,
you can connect it with this speaker
easily.
1 Enable NFC on your Bluetooth
device (refer to its user manual).
2 Turn on the speaker.
» The blue LED indicator ashes.
3 Tap the NFC tag on the top of the
speaker with the NFC area of your
Bluetooth device.
4 Follow the on-screen instructions
to complete the pairing and
connection.
» After successful connection, the
speaker beeps twice, and the
LED indicator turns solid blue.
Option 2: Connect a device
manually
1 On your Bluetooth device, enable
Bluetooth and search for Bluetooth
devices that can be paired (see the
user manual of the device).
2 Turn on the speaker.
» The blue LED indicator ashes.
3 Select [Philips BT6600] displayed
on your device for pairing. If
necessary, input “0000” as the
pairing password.
» After successful connection, the
speaker beeps twice, and the
LED indicator turns solid blue.
Tip
•If the speaker is playing audio from a
connected Bluetooth device, it will not
beep after connected to another device.
7EN
LED indicator Description
Flashing blue
quickly
Ready for pairing
Flashing blue slowly Connecting
Solid blue Connected
Connect three Bluetooth
devices simultaneously
The speaker can connect to three
Bluetooth devices at the same time.
• If the speaker is connected to one
device, repeat the above steps to
connect to the second and third
device (see the above section
“Connect a device”).
• If the speaker is connected to three
devices, press and hold for two
seconds.
» The speaker disconnects the
earliest device which is not
playing music, and gets ready to
pair with another device.
2 sec.
Play from Bluetooth
device
Note
•If there is an incoming call on the
connected mobile phone, music play
pauses.
• After successful Bluetooth
connection, play audio on the
Bluetooth device.
» Audio streams from your
Bluetooth device to the speaker.
• If more than one device is
connected with the speaker, play
audio from any connected devices,
and the music playback through the
other device is paused.
Control your phone call
After Bluetooth connection, you can
control an incoming call with this
speaker.
Button Function
Press to answer an incoming
call.
Press and hold for two
seconds to reject an
incoming call.
During a call, press to end
the current call.
During a call, press and hold
for two seconds to transfer
the call to your mobile device.
Clear pairing information
Press and hold for 7 seconds to clear
Bluetooth pairing information.
Andere Handbücher für BT6600
1
Inhaltsverzeichnis
Andere Philips Tragbare Lautsprecher Handbücher
Philips
Philips PSS010 Bedienungsanleitung
Philips
Philips SBA2900 Bedienungsanleitung
Philips
Philips sbm130 Bedienungsanleitung
Philips
Philips BT50B/37 Bedienungsanleitung
Philips
Philips BT4100 Produktinformationsblatt
Philips
Philips BA200 Bedienungsanleitung
Philips
Philips SBA3110/00 Bedienungsanleitung
Philips
Philips SBM130ORG/00 Bedienungsanleitung
Philips
Philips SoundShooter SBM110PNK Bedienungsanleitung
Philips
Philips MMS2141B Bedienungsanleitung
Philips
Philips BT2500 Bedienungsanleitung
Philips
Philips BT110 Bedienungsanleitung
Philips
Philips SBA3010BLU/37 Bedienungsanleitung
Philips
Philips P8/10 Bedienungsanleitung
Philips
Philips BT150 Bedienungsanleitung
Philips
Philips SB300B/00 Bedienungsanleitung
Philips
Philips SBT11BLK Bedienungsanleitung
Philips
Philips SBP1120/10 Bedienungsanleitung
Philips
Philips SB500 Bedienungsanleitung
Philips
Philips BT55 Bedienungsanleitung
