Philips VSS7903/00T Bedienungsanleitung

Electro Magnetic Compatibility (EMC)

This equipment complies with European rules for EMC according to

EN55013, EN55020 and EN50082-1.

Operation is subject to the following two conditions:

1 This device may not cause harmful interference.

2 This device must accept any interference received, including interference

that may cause undesired operation.

The equipment conforms with the EMC directive and low-voltage

directive.

This device complies to FCC rules under test conditions that included

use of system cables and connectors between system components. If you

have any problems, contact your dealer.

Warnings

Any unauthorized modification to this equipment may cause violation of

the FCC rules resulting in the revocation of the authorization to operate

the equipment.

To prevent fire or shock hazard, do not expose this accessory to rain or

moisture.

The exclamation mark within a triangle is intended to alert the

user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the

appliance.

Note: We advise you to use the following types of mains power adaptors in

combination with the camera:

UK Philips VCM1162/01R

EUR Philips VCM1162/00R

Interface Box

Table of contents

Page

Introduction .................................................................................................................4

Installation....................................................................................................................5

Mounting the box

System cable

External power supply

Location of switches and connectors

Settings.............................................................................................................................9

Input selector switch

Internal switches

Power supply (Internal/External)

Last in line switch

Volume preset

Cable length compensation selector

Possible configurations....................................................................................11

Third party camera, video and audio signals

System camera with external audio

VCR input and output of separate camera

Third party monitor

Cash Register Interface

System camera at long distance

English

Read these instructions, before putting your system in operation.

English

Introduction

Thank you for buying this accessory for your observation system.

1 System monitor

2 Video recorder (VCR)

3 Slave monitor

4 Accessory boxes (0-2 per cable)

5 Interface box

6 System cameras

7 Non system cameras (CVBS)

8 Mains power adapter

The following items are included in this kit:

1 Interface box

1 System cable (5m/15ft)

1 User manual

Colour Observation Monitor

CL 66610005_005a.AI

6 6 7

talk action menu _+next

auto view

Colour Observation system

Colour Observation Monitor

4 4

The interface box can be used to add, or extract, normal standard audio

and/or video signals to, or from, your Colour Observation system.

This means that the interface box can be used to connect a third party

camera to your Colour Observation system. It can also be used to

connect e.g. a Cash Register Interface to the Colour Observation system,

or to connect a system camera to a third party system.

Other possible configurations are described in chapter 'Possible

configurations'.

Selection between the twisted pair system cable input and CVBS/Audio

input is done by means of an outside switch.

Installation

Remark: When the system configuration is altered, the system monitor needs to check

and memorise the configuration of the cameras and accessories connected to its inputs.

This is done automatically when the power is switched on. Use the power switch to

switch off; only operating the power save key is not sufficient. If switching off is

impracticable, use the auto install option of the system monitor's install menu.

Mounting the box

1 Loosen the screw holding the cover and remove the cover.

2 Remove the circuit board 1.

3 Fasten the bottom plate of the box with two screws.

4 Fit the circuit board.

5IMPORTANT: Adjust the settings of the circuit board switches to

configure the box according to your system. See section 'settings'.

6 Fit the cover and secure the screw holding it.

7 Now make the connections. See section 'possible configurations' for the

correct connections and the setting of the 'input selector switch' and the

internal 'slide switches'.

CL 76610003_001.AI

CL 66610005_502.AI

CL 66610005_504.AI

System cable

For the interconnections between the monitor, accessories and camera,

a system cable is supplied. For an optimum picture and sound quality,

you should always use 4-wire dual twisted-pair cable when extending the

connection (max. 300m/900ft). The cable and plugs are available in the

hobby and professional trade. Fix the connectors to the cable

corresponding to the figure below.

Caution: The plugs used for the observation system have the same dimensions as

standard telephone plugs.

Never connect the security system with telephone equipment!

External power supply

If the cable length between monitor and system camera exceeds

200m/600ft after an accessory is inserted in the line, a mains power

adapter (optional) should be used to power the system camera

(see accessories). In this way the max. allowed cable length is extended to

300m/900ft.

CL 66610005_006.AI

4-5

2-3

4-5

2-3

There are two ways to connect a mains power adaptor to the system;

•To the external supply socket at the rear of the system camera, or

•to the external supply socket (4) at the inside of the interface box.

Remark: This does not apply for the VSS2903/19T.

Location of switches and connectors

1 Auxiliary audio out (Cinch)

2 Auxiliary video out (BNC)

3 System cable output (output to connect system monitor)

4 Supply socket for mains power adaptor

5 Cable length compensation selector

6 Slide switches (last in line/power supply internal or external)

7 Volume preset

8 Auxiliary audio in (Cinch)

9 Auxiliary video in (BNC)

10 Input selection switch (Auxiliary/System camera)

11 System cable input (input for system camera)

1 4 6 7

CABLE LENGTH

COMPENSATION

24V INT

LAST YES EXT.

INPUT

OUTPUT

CL 76610003_002.AI

Settings

Input selection switch (10)

With this switch you can select which audio/video input is displayed on

the screen of the system monitor.

There are two possibilities:

•CAMERA

The system camera input is selected.

When a system camera is connected, the system monitor reproduces the

image and sound from the system camera.

•AUX.

The auxiliary input is selected.

When a third party camera is connected, the system monitor reproduces

the image and sound of the third party camera.

Remark: It is not possible to connect both a device to the aux. input and to the

camera input when the selector switch is in camera position.

Internal switches

Remark: This option does not apply for the VSS2903/19T.

Two switches, located on the circuit board inside the case, are used to

configure the circuit according to the system. The two small slide

switches have the following functions:

Switch Description

24V INT EXT Power supply (24V) Internal/External

LAST YES NO Last in line

Power supply Internal/External (6)

Set this switch to;

•INT

When no external power supply is used.

•EXT

When an external power supply is used.

Last in line switch (6)

Set this switch to;

•YES

When the interface box is the last accessory box in the system cable.

•NO

When another accessory box is connected to the system camera input of

the interface box.

Volume preset (7)

By means of the volume preset, you can adjust the audio level of the

device (for e.g. of a third party camera) which is connected to the 'audio

in'-input.

Cable length compensation selector (5)

This selector adapts the interface box to the length of the system cable

connecting system monitor and interface box. This to optimize the

picture quality. Set the cable length compensation selector to the correct

cable length. The length set must be the same as the length of the system

cable connecting the system monitor and interface box

(0-300m/900ft max.).

Remark: This only compensates for the aux. input.

Possible configurations

This section shows the system configurations which are possible with the

interface box. The figure below shows a block diagram with the

audio/video signal paths.

The following configurations are possible:

Remark: In some configurations, the camera cannot be synchronised to the system

monitor (not locked). When a quad monitor is used in quad mode, it will result in

unusable pictures.

1 Third party camera, video and audio signals (not locked)

AUDIO-OUT (CINCH)

VIDEO-OUT (BNC)

AUDIO-IN (CINCH)

VIDEO -IN (BNC)

OUTPUTSINPUTS

AUX. OUTPUT

AUX. INPUT

talk action menu _+next

auto view

Colour Observation system

CL 76610003_003.AI

Third party camera I/F box

camera aux.

A/A box or

int. box

talk action menu _+next

auto view

Colour Observation system

LAST

EXT.

INT.

YES

CL 76610003_007.AI

24V

Inhaltsverzeichnis

Andere Philips Aufnahmegeräte Handbücher

Philips

Philips CDR Mozart Bedienungsanleitung

Philips

Philips CDR-600 Bedienungsanleitung

Philips

Philips CDR 800/17 Bedienungsanleitung

Philips

Philips POCKET MEMO LFH9600 Bedienungsanleitung

Philips

Philips CDR-600 Bedienungsanleitung

Philips

Philips CDR770 null

Philips

Philips CDR880 Bedienungsanleitung

Philips

Philips CDR570 Bedienungsanleitung

Philips

Philips VoiceTracer DVT7500 Bedienungsanleitung

Philips

Philips CDR775BK Bedienungsanleitung

Philips

Philips CDR950BK Bedienungsanleitung

Philips

Philips TL720R/00T Bedienungsanleitung

Philips

Philips CDR700BK Bedienungsanleitung

Philips

Philips CDR570BK99 Bedienungsanleitung

Philips

Philips CDR-775 Bedienungsanleitung

Philips

Philips MatchLine VR830/02 Bedienungsanleitung

Philips

Philips VoiceTracer DVT2110 Bedienungsanleitung

Philips

Philips VoiceTracer DVT4110 Bedienungsanleitung

Philips

Philips DP-IF8000 Bedienungsanleitung

Philips

Philips CDR775/777 Bedienungsanleitung

Philips

Philips VoiceTracer DVT7500 Bedienungsanleitung

Philips

Philips AZ-2030 Bedienungsanleitung

Philips

Philips VHS VR540/02 Bedienungsanleitung

Philips

Philips AZ-2040 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch