Philips VueLink M1032A Installations- und Betriebshandbuch

Part Number M1032-9000Y

4512 610 18581

Published in October 2006

Edition 22

Y.00.00

PHI

Philips M1032A VueLink

External Device

Service Booklet

Notice

Philips makes no warranty of any kind with regard to this material, including, but

not limited to, the implied warranties of merchantability and fitness for a particular

purpose. Philips shall not be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance or use of

this material.

This document contains proprietary information that is protected by copyright. All

rights are reserved. No part of this document may be photocopied, reproduced or

translated to another language without prior written consent of Philips Medical

Systems. The information contained in this document is subject to change without

notice. Philips assumes no responsibility for the use or reliability of its software on

equipment that is not furnished by Philips.

Important

United States federal law restricts these devices to sale by or on the order of a

physician.

Intended Use

Description The Philips M1032A VueLink module is a plug-in module for use with a Philips

IntelliVue, V24 or V26 Patient Monitor or a Philips CMS Patient Monitoring

System.

The Philips M1032A VueLink module is powered via the patient monitor.

Purpose The Philips M1032A VueLink module transmits information from a connected

external device to a Philips IntelliVue, V24 or V26 Patient Monitor or a Philips CMS

Patient Monitoring System. The Philips M1032A VueLink module is not a

therapeutic device.

Environ-

ment The Philips M1032A VueLink module is intended to be used in a clinical

environment by trained healthcare professionals. It is not intended for home use.

Indications for Use

Condition The use of a Philips M1032A VueLink module is generally indicated when the

clinician decides there is a need to include the physiological and device parameters

and waves and alarms generated by external devices into the Philips IntelliVue, V24

or V26 Patient Monitor or a Philips CMS Patient Monitoring System.

Part of Body

or Type of

Tissue with

Which the

Device Inter-

acts

The Philips M1032A VueLink module does not contact the body or tissue of the

patient. Signals are obtained from external devices.

Frequency

of Use The Philips M1032A VueLink module is indicated for use when prescribed by a

clinician.

Physiologi-

cal Purpose The Philips M1032A VueLink module is indicated when the purpose is to gain

information for treatment, to assess adequacy of treatment, or to rule out causes

of symptoms. The Philips M1032A VueLink module is well suited for patient

monitoring.

Patient Pop-

ulation Please refer to the documentation describing the external device.

Prescrip-

tion Versus

Over-the-

Counter

The Philips M1032A VueLink module is a prescription device.

Warnings, Cautions and Notes

In this guide:

Warning

•A

warning

alerts you to a potential serious outcome, adverse event or

safety hazard.

Failure to observe a warning may result in death or serious injury to the

user or patient.

Caution A caution alerts you where special care is necessary for the safe and effective

use of the product.

Failure to observe a caution may result in minor or moderate personal injury

or damage to the product or other property, and possibly in a remote risk of

more serious injury.

Note A note gives special instructions to highlight an operating procedure or practice.

Notes may precede or follow the applicable text.

Responsibility of the Manufacturer

Philips Medical Systems only considers itself responsible for any effects on safety,

reliability and performance of the equipment if:

• assembly operations, extensions, re-adjustments, modifications or repairs are

carried out by persons authorized by Philips, and

• the electrical installation of the relevant room complies with national

standards, and

• the Philips M1032A VueLink module is used in accordance with the

instructions for use contained in this document, and in the relevant chapter

of the user documentation for the patient monitor into which the module is

plugged (Philips IntelliVue, V24 or V26 Patient Monitor or a Philips CMS

Patient Monitoring System).

Warning

• Failure on the part of the responsible individual hospital or institution

employing the this equipment to implement a satisfactory maintenance

schedule may cause undue equipment failure and possible health

hazards.

The maintenance schedule is defined in the Testing and Maintenance

chapter of the IntelliVue Patient Monitor Service Guide, the Philips CMS

Patient Monitoring System Service Guide, or the Philips V24/V26

Component Monitoring System Service Guide, corresponding to your

monitor.

Note Not all the device drivers are available in all countries.

The Instructions for Use for all drivers are translated into the following languages:

Czech, Danish, Dutch, Estonian, Finnish, French, German, Greek, Hungarian,

Italian, Japanese, Norwegian, Polish, Portuguese, Romanian, Russian, Simplified

Chinese (China), Slovak, Spanish, Swedish, Traditional Chinese (Taiwan), Turkish.

The driver software may not be available in all of these languages. Please refer to the

CMS-PM softserver (http://pww.softserver.anr.ms.philips.com/navigation.asp,

subfolder Vuelink, subfolder Additional Information)for a list of the translated

drivers that are available.

Please also check your local regulatory and business requirements for permission to

sell.

Philips authorized technical personnel are responsible for the setup, configuration

and repair of the VueLink module and all related Philips equipment. The

configuration, setup and repair of external devices furnished by manufacturers other

than Philips Medical Systems must be carried out by local site personnel, or by

representatives of the external device manufacturer.

Philips Medical Systems is not responsible for any problems arising from inaccurate

or erroneous data displayed on the Philips patient monitor that is received from

external devices furnished by manufacturers other than Philips Medical Systems.

Philips Medical Systems makes every effort to ensure that signal names are

maintained between the Philips patient monitor and any interfaced external devices.

However, signal names within the Philips patient monitor also need to remain

consistent. This means that in some cases the wave and numeric labels used on the

Philips monitor may be different from those used on the interfaced external device.

Philips Medical Systems will not be held responsible for any errors in the

configuration of the VueLink module for connection to free-analog devices.

If manufacturers other than Philips Medical Systems make changes to any VueLink

supported device, Philips Medical Systems will try to ensure that interfacing to that

device remains possible. However, Philips Medical Systems reserves the right to

discontinue interfacing to any device.

Introduction

This Service Guide contains technical details for the connection of external devices

to the VueLink module. It is not a comprehensive, in-depth explanation of the

product architecture or technical implementation.

Who Should

Use This

Guide

This guide is for biomedical engineers or technicians responsible for connecting

external devices to Philips patient monitoring systems using the VueLink module.

How to Use

This Booklet This booklet provides information on the worldwide external devices that can be

connected to the VueLink module. It should be printed and inserted into Appendix

A of the VueLink Module Handbook, completely replacing the existing worldwide

driver information.

The information contained in this document is subject to change without notice.

Philips Medizin Systeme Böblingen GmbH

Hewlett-Packard Str. 2

71034 Böblingen

Germany

All rights are reserved.

Reproduction in whole or in part is prohibited without the prior written consent of

the copyright holder.

Connecting your Device to VueLink

There are two different ways to connect your Device to VueLink:

• Connection via a Supported Device driver.

This uses one of the following device outputs:

–Analog

– RS-232 Digital

– Analog/Digital combination

• Connection via a Free Analog Device driver.

This only uses device analog outputs.

Supported Device Drivers

Supported Device Drivers are preconfigured in the VueLink module. A dedicated

ready-prepared VueLink cable is available for connecting the external device to the

module. (Please refer to page A-4 for cable part numbers).

Free Analog Device Drivers

Free Analog Device Drivers must be manually configured into the module at

installation. A Free Analog VueLink cable is available for connecting the Free

Analog external device to the VueLink module. One end of the cable is

unterminated and must be prepared for connection to the external device on-site.

(Please refer to page B-4 for cable option part numbers).

Connecting your Device to VueLink

Inhaltsverzeichnis

Andere Philips Aufnahmegeräte Handbücher

Philips

Philips Dynalite DPMI940-DALI Bedienungsanleitung

Philips

Philips VoiceTracer DVT1600 Bedienungsanleitung

Philips

Philips CDR770 Bedienungsanleitung

Philips

Philips Respironics CoughAssist 70 Series Bedienungsanleitung

Philips

Philips CDR880 Bedienungsanleitung

Philips

Philips CDR870 Bedienungsanleitung

Philips

Philips CDR 765 Bedienungsanleitung

Philips

Philips VoiceTracer DVT7500 Bedienungsanleitung

Philips

Philips CDR-778 Bedienungsanleitung

Philips

Philips VoiceTracer DVT1160 Bedienungsanleitung

Philips

Philips PSC805 Aurilium Bedienungsanleitung

Philips

Philips CDR570 Systemhandbuch

Philips

Philips POCKET MEMO LFH0955 Bedienungsanleitung

Philips

Philips N5581 Bauanleitung

Philips

Philips CDR 765 Bedienungsanleitung

Philips

Philips CDR-600 Bedienungsanleitung

Philips

Philips CDR800/00/17 Bedienungsanleitung

Philips

Philips CDR 765 null

Philips

Philips CDR796 Bedienungsanleitung

Philips

Philips CDR570 Bedienungsanleitung

Philips

Philips CDR570 Bedienungsanleitung

Philips

Philips CDR570 Bedienungsanleitung

Philips

Philips CDR 538 Bedienungsanleitung

Philips

Philips LFH 0955 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch