Philips SRP2018/27 Bedienungsanleitung

SRP2018

Always there to help you

www.philips.com/support

User manual

Question?

Contact

Philips

English

EN 1

Contents

1 Your universal remote 2

Introduction 2

Overview of the universal remote 2

Supported devices 3

2 Get started 4

Insert batteries (not included) 4

Set up the universal remote 5

3 Notice 9

Disposal of your old product and battery 9

4 Service and support 10

Frequently asked questions 10

Need help? 10

Contents

2 EN

1 Your universal remote

Congratulations on your purchase, and welcome to Philips!To fully

benet from the support that Philips offers, register your product at

www.philips.com/welcome

Introduction

With the universal remote, you can operate up to 8 different devices.

Overview of the universal remote

a INPUT: select available source inputs (antenna, cable, etc.).

: LED indicator

: power on or off.

b Device selection buttons

English

EN 3

c GUIDE: displays the program guide.

INFO: displays on-screen channel information.

MENU: menu on or off.

BACK: exit from the menu.

OK: conrm your selection.

/ / / : up/down/left/right.

d VOL+/-: adjust the volume.

CH+/CH-: go to the next/previous channel.

: mute

LAST: return to the previous tuned channel.

e : previous page

: stop

: next page

: play

: pause

: rewind

: record

: fast forward

f A/B/C/D: context sensitivity buttons (A - yellow, B - blue, C- red,

D - Green)

g Digit buttons

ENTER: conrm the digit button selection.

(-): select between one and two-gure channel numbers.

Supported devices

Device name Description

TV/TV-2 TV, DTV

CBL/SAT Cable box, satellite receiver, IPTV, DVR, HDTV

decoder and TiVo

BD DVD player/recorder, Blu-ray player

STR Streaming devices, Apple TV, Roku, Sony,WD TV,

Netgear

VCR Video cassette player/ recorder

AUX Auxiliary equipment, media center PC, others

4 EN

2 Get started

Insert batteries (not included)

Warning

• Check the battery polarity when inserting in the battery compartment. Incorrect

polarity may damage the product.

Caution

• Risk of explosion! Keep batteries away from heat, sunshine or re. Never discard

batteries in re.

• Risk of decreased battery life! Never mix different brands or types of batteries.

Note

• When you replace the batteries, all user settings will be retained in the memory of

the universal remote for 5 minutes.

English

EN 5

Set up the universal remote

You must rst set up the universal remote before operating your

devices.

Manual registration

1 Switch on your device.

2 Press and hold the device selection button (e.g.TV) for 5 seconds

until the red LED is on.

3 Look up the 5-digit code for your brand in the code list. Codes

are listed by the device type and brand name.The most popular

code is listed rst.

6 EN

4 Enter the rst 5-digit code using the digit buttons.

5 If the light is off, a valid code is saved. Otherwise, the light will ash

once, and then remains on for code re-entry.

6 Operate the device with the universal remote. If your device

responds correctly, it means you have entered the right code.

Otherwise, repeat from step 2, and enter the second code on the

list.

Note

• It is possible sometimes that your device only responds to some of the buttons. In

such case, set up with the next code in the code list, and try operating your device

again.

• Each device button can be used to set up any device. E.g. you may setup aTV using

the BD device button.

English

EN 7

Auto registration

1 Switch on your device.

2 Press and hold the device selection button (e.g.TV) for 5 seconds

until the red LED is on.

3 Point at your device with the universal remote.Then press and

release to start searching the code for your brand. A different

infrared signal is sent every 2 seconds as the universal remote

searches, indicated by a red ash.

8 EN

4 When the device is off, immediately press and release OK to save

the code.The red LED indicator will turn off.

max. 20

minutes

5 Operate the device with the universal remote. If your device

responds correctly, it means you have saved the right code.

Note

• Auto registration can be reversed, by pressing and releasing once more during the

auto registration process.This is helpful if you missed out the chance to press OK

within 2 seconds. Make sure that the device is rst powered on again.

• Repeat the same procedures to set up other devices.

• It is possible sometimes that your device only responds to some of the buttons. In

such case, set up with the next code in the code list, and try operating your device

again.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Fernbedienung Handbücher

Philips

Philips Pronto TSU9200 Bedienungsanleitung

Philips

Philips SRP6011 Bedienungsanleitung

Philips

Philips SRU2103S/27 Bedienungsanleitung

Philips

Philips IRT 9090 Bedienungsanleitung

Philips

Philips SBCRU940/00 Bedienungsanleitung

Philips

Philips US2-PDVR8 Bedienungsanleitung

Philips

Philips srp3014 Bedienungsanleitung

Philips

Philips 22AV8573 Bedienungsanleitung

Philips

Philips SRP 1001 Bedienungsanleitung

Philips

Philips SRP4319S-27 Bedienungsanleitung

Philips

Philips SBCRU510/00B Bedienungsanleitung

Philips

Philips PRONTO TSU7500 Bedienungsanleitung

Philips

Philips SRU1060/10 Bedienungsanleitung

Philips

Philips SRU1020/10 Bedienungsanleitung

Philips

Philips SBCRU130 Bedienungsanleitung

Philips

Philips SRP4004/86 Bedienungsanleitung

Philips

Philips SRU5050/55 Bedienungsanleitung

Philips

Philips SBC RU 440 Bedienungsanleitung

Philips

Philips SRP5004 Bedienungsanleitung

Philips

Philips SRP4004/87 Bedienungsanleitung

Philips

Philips SRU3040 Bedienungsanleitung

Philips

Philips Environ3 61205A Bedienungsanleitung

Philips

Philips DTR230 - Bedienungsanleitung

Philips

Philips SpeechMike LFH3500 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung