Philips SRU740NC/05 Bedienungsanleitung

SRU 740/10

Quick, Clean & Easy Setup

www.philips.com/urc

Instructions for use 4

Mode d'emploi 12

Bedienungsanleitung 20

Gebruiksaanwijzing 28

Vejledning 36

Bruksanvisning 44

Bruksanvisning 52

Käyttöohjeet 60

FIN

Instruzioni per l'uso 68

Instrucciones de

utilización 76

Manual de utilização 84

SRU740_10_v2.qxd 26-04-2005 15:18 Pagina 1

SRU740_10_v2.qxd 26-04-2005 15:18 Pagina 2

SRU740_10_v2.qxd 26-04-2005 15:18 Pagina 3

Contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Replacing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10

Adjusting device selection (Mode-selector) . . . . . . . . . . . . . . . . . . . . . . 9

Adding a remote control function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Assigning the volume control to another mode . . . . . . . . . . . . . . . . . . 10

Restoring the original remote control settings . . . . . . . . . . . . . . . . . . . 10

5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . 92-113

1. Introduction

Congratulations on your purchase of the Philips SRU740 universal remote

control. After installing the remote control you can operate a maximum of

4 different devices with it:TV, SAT (settop box, satellite or cable decoder),

DVD player/recorder or video recorder and amplifier/receiver.You can find

information about how to prepare this remote control for use in the chapter

‘Installing the remote control’.

2. Installing the remote control

•A battery is already placed in the battery compartment of the SRU740.

Just remove the protective foil from the battery and the SRU740 is

ready for use.

•

If the indicator LEDs (TV, SAT, DVD/VCR and AMP) blink four times after

every key press, the remote control is indicating that its battery is running

low. Replace the old battery with a new

CR2025 Lithium battery. See

‘Replacing the battery’.

Replacing the battery

The SRU740 comes with one spare battery in the packaging.

1Press the edge of the battery compartment

as shown. Keep the edge pressed and slide

the compartment outwards.

2Place the spare CR2025 Lithium battery

into the battery compartment, as shown.

Make sure to place the text side of the

battery upwards.

3Slide the compartment back and click it firmly into place.

Instructions for use

English

SRU740_10_v2.qxd 26-04-2005 15:18 Pagina 4

Instructions for use

English

Testing the remote control

The remote control has been programmed to operate most Philips devices.

Because the SRU740 may use different signals for each brand and even for

different models of the same brand, it is advisable to test whether your

device responds to the SRU740.The example below (TV) instructs you how

to do this.You can repeat the same steps for other devices (DVD, video

recorder, etc.) which you want to operate using the SRU740.

Example of TV:

1Turn your TV on manually or use the original remote control.

Tune to channel 1.

2Press the SELECT key to select TV.

Press the key until the TV LED lights up.

If the LED does not light up, check whether the

battery is properly inserted

(see ‘Replacing the battery’).

3Check whether all keys are working.

For an overview of the keys and their

functions see ‘3. Keys and functions’.

–If the TV responds as it should to all of the

key commands the SRU740 is ready for use.

•If the device does not respond at all or not to all of the

key commands, follow the instructions under

‘Setting the remote control’, or for online setup go to:

www.philips.com/urc

Setting the remote control

This is only necessary if your device does not respond to the SRU740.

If that is the case, the SRU740 does not recognize the brand and/or model of

your device and you need to program the remote control to do so.

The example below (TV) instructs you how to do this.You can repeat the

same steps for other devices (DVD, video recorder, etc.) which you want to

operate using the SRU740.

Note:The third mode (DVD/VCR) can be used either for operating your

DVD player/recorder or your VCR (videorecorder).

SRU740_10_v2.qxd 26-04-2005 15:18 Pagina 5

Automatically setting the remote control

The remote control will now automatically search for the right code for your

device.

Example of TV:

1Make sure the TV is switched on and select a channel using the original

remote control or the keys on the TV (for example channel 1).

The SRU740 emits the ‘switch off TV’ signal for all models of TV that are

stored in the memory.

•If the device is a DVD player/recorder or video recorder, insert a disk or

tape and start playback.

2Press the SELECT key to select TV.

Press the key until the TV LED lights up.

3Then keep keys 1 and 3 pressed

simultaneously for three seconds until the TV

LED flashes twice and then remains lit.

4Press and hold the Standby key of the

SRU740.

–The SRU740 now starts emitting all known

‘TV off’ signals, one by one.

Each time a code is sent, the TV LED

lights up.

5When your TV switches off (stand-by), release

the Standby key of the SRU740 immediately.

–The SRU740 has now found a code that

works on your TV.

6Check if you can operate all functions on your TV with the SRU740.

•If this is not the case, you can redo the automatic setting.

The SRU740 will then search for a code that works better.

–After the SRU740 has run through all the known codes, the search will

stop automatically and the TV LED will stop flashing.

–Automatic programming of a TV takes a maximum of 5 minutes.

For SAT, DVD/ VCR and AMP this time is 2 minutes.

Instructions for use

English

SRU740_10_v2.qxd 26-04-2005 15:19 Pagina 6

Manually setting the remote control

Example of TV:

1Turn on the TV manually or use the original remote control.

Tune in to channel 1.

2Look up the brand of your TV in the code list

at the back of this manual. One or more

four-figure codes are shown for each brand.

Note the first code.

Be careful! There are separate tables for TV,

video, DVD, etc.

On our website www.philips.com/urc you can directly select your device

typenumber to find the tight code.

Make sure you use the codes from the correct table.

3Press the SELECT key to select TV.

Press the key until the TV LED lights up.

4Keep keys 1 and 3 pressed simultaneously

for three seconds until the TV LED flashes

twice and then remains lit.

5Then enter the code noted in step 2 using the digit keys.

–The TV LED key will now flash twice.

If the LED flashes once for an extended period, the code has not been

entered properly or the wrong code has been entered.

Start again from step 2.

6Point the SRU740 at the TV and check that it responds as it should.

–If the TV responds to all of the key commands, the SRU740 is ready for

use. Do not forget to note your code.

•If the device does not respond at all, or not to all of the

key commands, start again from step 2 and try the next code

from the list.

Instructions for use

English

SRU740_10_v2.qxd 26-04-2005 15:19 Pagina 7

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions.

1yStandby . . . . . . . . switches TV, SAT, DVD,VCR or AMP on or off.

2Indicator LEDs

3- teletext on/off (disc menu)

- text off

- index

- play (VCR/DVD)

- text hold

- record (VCR/DVD)

- wide screen TV

- red teletext key

- rewind (VCR/DVD)

- green teletext key

- stop (VCR/DVD)

- yellow teletext key

- pause (VCR/DVD)

- blue teletext key

- wind (VCR/DVD)

4MENU . . . . . . . . . . . turns the menu on and off.

5Cursor keys . . . . . . cursor up, down, left, right in a menu.

6AV . . . . . . . . . . . . . . . switches between external inputs of your

equipment.

7INFO . . . . . . . . . . . . turns menu info on and off.

8- VOL +. . . . . . . . . . . adjusts the TV or AMP volume.

9Digit keys . . . . . . . . - direct choice of channels and other functions.

- source selection keys in amplifier mode

(together with SHIFT).

Tr y out other combinations with the Shift-key on your device in order to find

out which functions are available.

Only functions featured on the original remote control are available.

0SHIFT . . . . . . . . . . . for extra functions.When pressed at the same

time as a second key, the second key will get

another function. For example:

SHIFT + . . . . . . installs your TV.

SHIFT + . . . . . . stores TV settings.

!/. . . . . . . . . . . . . . . selects between one- and two-figure channel

numbers.

@22/ SURROUND . selects previous programme/channel.

selects surround modes.

#- PROG + . . . . . . . . selects a previous or following channel.

$s. . . . . . . . . . . . . . . . mutes the sound of the TV or DVD.

%OK. . . . . . . . . . . . . . . confirms your selection.

^BACK. . . . . . . . . . . . jumps back one level in the menu or turns off the

menu.

&SELECT. . . . . . . . . . selects TV,VCR/DVD, SAT or AMP mode.

If you use the (ﬁ) 'memory off' key to get to the next teletext page on your

Philips TV, you can press the Subtitle key for this. See also ‘Troubleshooting’.

If the device does not respond at all, or not to all of the key

commands, follow the instructions under ‘Setting the remote control’.

It is possible that you must enter another code for the device.

Instructions for use

English

SRU740_10_v2.qxd 26-04-2005 15:19 Pagina 8

4. Extra possibilities

Adjusting device selection (Mode selector)

The SRU740 is default set for operating TV, SAT (settop box, satellite or cable

decoder), DVD (or VCR) and AMP (amplifier).You can select the device you

wish to operate with the SELECT key (mode selector). Each option allows

operation of one device only. If desired, you can program the SELECT key

(mode selector) to select a different kind of device. For example, if you want

to operate a second TV. In the following example you will see how to

configure the SAT mode for a second TV.

1Switch on the second TV.

2Press the SELECT key to select SAT.

Press the key until the SAT LED lights up.

3Then keep keys 1 and 6 on the SRU740

pressed simultaneously for three seconds,

until the SAT LED lights up.

4Press keys 9, 9 and 2 in that order.

5Press the SELECT key to select TV.

Press the key until the TV LED lights up.

6Press the 1 key.

–The SAT LED flashes twice.

SAT will now allow you to operate your

second TV.

7Program the SRU740 to operate the second TV.

See ‘Setting the remote control’.

Adding a function to the remote control

If you want to add a function to the SRU740, you can contact the

Philips service line for Universal Remote Control to ask for the 5-figure code

for the extra function.

Instructions for use

English

SRU740_10_v2.qxd 26-04-2005 15:19 Pagina 9

Assigning the volume control to another mode

The volume controls (Vol +,Vol - and s) on the SRU740 are assigned to

either your TV or your amplifier/receiver, depending on the device you have

selected:

MODE VOLUME CONTROLS

TV mode selected ............................Volume controls work with TV

DVD (VCR) mode selected........Volume controls work with TV

SAT mode selected..........................Volume controls work with TV

AMP mode selected........................Volume controls work with amplifier/ receiver

If you want a different setup, the volume control assignment can be changed.

Example: In SAT mode you want to operate the amplifier/receiver volume

control

1Press the SELECT key to select SAT.

Press the key until the SAT LED lights up.

2Then keep keys 1 and 6 on the SRU740

pressed simultaneously for three seconds,

until the SAT LED flashes twice and then

remains lit.

3Press keys 9, 9 and 3 in that order.

4Press the SELECT key to select SAT.

Press the key until the SAT LED lights up in

the selector window.

Restoring the original functions of your remote

control

1Keep keys 1 and 6 on the SRU740

pressed simultaneously for three seconds,

until one of the LEDs (TV, SAT, DVD/VCR,

AMP) lights up.

2Press keys 9, 8 and 1, in that order.

– The LED flashes twice. All original functions

have now been restored and any extra

functions have been deleted.

Instructions for use

English

SRU740_10_v2.qxd 26-04-2005 15:19 Pagina 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips Fernbedienung Handbücher

Philips

Philips SRU3003WM - Universal Remote Control Bedienungsanleitung

Philips

Philips SBCRU940/00 Bedienungsanleitung

Philips

Philips US2-PMDVR8 Bedienungsanleitung

Philips

Philips SRU5130/53 Bedienungsanleitung

Philips

Philips SRU 5040/10 Bedienungsanleitung

Philips

Philips SRU3030/10 Bedienungsanleitung

Philips

Philips SRP4004 Bedienungsanleitung

Philips

Philips SRP2003WM Bedienungsanleitung

Philips

Philips SBCRU252/00 Bedienungsanleitung

Philips

Philips PMDVR8 Bedienungsanleitung

Philips

Philips Perfect replacement SRP5107/27 Bedienungsanleitung

Philips

Philips SRP2006/55 Bedienungsanleitung

Philips

Philips G96SVC Bedienungsanleitung

Philips

Philips SRP 1001 Bedienungsanleitung

Philips

Philips Environ3 61205A Bedienungsanleitung

Philips

Philips 22AV1106B Bedienungsanleitung

Philips

Philips SBCRU520/85 Bedienungsanleitung

Philips

Philips KWR101803/01B Bedienungsanleitung

Philips

Philips SRU5150/86 Bedienungsanleitung

Philips

Philips SRP3016S/27 Bedienungsanleitung

Philips

Philips 7FF2CWO Bedienungsanleitung

Philips

Philips PH750 Bedienungsanleitung

Philips

Philips Prestigo SRT8215/10 Bedienungsanleitung

Philips

Philips Perfect replacement SRP5107WM Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung