Philips Fidelio E6 Bedienungsanleitung

User manual

www.philips.com/support

Always there to help you

Question?

Contact

Philips

Wireless satellite speakers

and subwoofer

1EN

Contents

1 Important 2

Safety 2

Care for your product 3

Care of the environment 3

Compliance 3

Help and support 4

Open source software 4

2 Your product 4

Main unit 4

Remote control 5

Wireless surround speakers 6

Wireless subwoofer 7

Connectors 8

3 Connect and set up 9

Connect the main unit 9

Network setup prompt 9

Charge speakers 9

Manual pair-up with the main unit 10

Place speakers 10

Connect audio from TV 11

Connect audio from other devices 12

Connect digital devices through HDMI 13

4 Google Cast™ and Spotify Connect14

Connect this product to network 14

Stream music to this product 14

Navigate the App home menu 15

5 Spatial calibration 15

Step 1: calibrate the listening zone 16

Step 2: calibrate the surround speaker

position 16

6 Use your product 17

Adjust the volume 17

Choose your sound 17

MP3 player 19

USB storage devices 19

Play music via Bluetooth 19

Connect Bluetooth via NFC 22

Auto standby 22

Set display brightness 22

Apply factory settings 22

7 Update software 23

Check software version 23

Update software via Internet 23

Update software via USB 24

8 Productspecications 25

9 Troubleshooting 26

2EN

1 Important

Read and understand all instructions before you

use your product. If damage is caused by failure

to follow instructions, the warranty does not

apply.

Safety

Riskofelectricshockorre!

• Before you make or change any

connections, make sure that all devices are

disconnected from the power outlet.

• Never expose the product and accessories

to rain or water. Never place liquid

containers, such as vases, near the product.

If liquids are spilt on or into the product,

disconnect it from the power outlet

immediately. Contact Consumer Care to

have the product checked before use.

• Never place the product and accessories

near naked ames or other heat sources,

including direct sunlight.

• Never insert objects into the ventilation

slots or other openings on the product.

• Where the mains plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

• Batteries (battery pack or batteries

installed) shall not be exposed to excessive

heat such as sunshine, re or the like.

• Disconnect the product from the power

outlet before lightning storms.

• When you disconnect the power cord,

always pull the plug, never the cable.

Riskofshortcircuitorre!

• For identication and supply ratings, see

the type plate at the back or bottom of

the product.

• Before you connect the product to the

power outlet, ensure that the power

voltage matches the value printed on the

back or bottom of the product. Never

connect the product to the power outlet if

the voltage is different.

Riskofinjuryordamagetothisproduct!

• Never place the product or any objects

on power cords or on other electrical

equipment.

• If the product is transported in

temperatures below 5°C, unpack the

product and wait until its temperature

matches room temperature before

connecting it to the power outlet.

• Parts of this product can be made of

glass. Handle with care to avoid injury and

damage.

Riskofoverheating!

• Never install this product in a conned

space. Always leave a space of at least four

inches around the product for ventilation.

Ensure curtains or other objects never

cover the ventilation slots on the product.

Riskofcontamination!

• Do not mix batteries (old and new or

carbon and alkaline, etc.).

• Danger of explosion if batteries are

incorrectly replaced. Replace only with the

same or equivalent type.

• Remove batteries if they are exhausted or

if the remote control is not to be used for

a long time.

• Batteries contain chemical substances, they

should be disposed of properly.

Riskofswallowingbatteries!

• The product/remote control may contain

a coin/button type battery, which can be

swallowed. Keep the battery out of reach

of children at all times! If swallowed, the

battery can cause serious injury or death.

Severe internal burns can occur within two

hours of ingestion.

• If you suspect that a battery has been

swallowed or placed inside any part of the

body, seek immediate medical attention.

3EN

• When you change the batteries, always

keep all new and used batteries out of

reach of children. Ensure that the battery

compartment is completely secure after

you replace the battery.

• If the battery compartment cannot be

completely secured, discontinue use of the

product. Keep out of reach of children and

contact the manufacturer.

This is CLASS II apparatus with double

insulation, and no protective earth provided.

Care for your product

• Use only microber cloth to clean the

product, such as removing dust and

shedding accumulated on the speaker

cloth. Do not use any cleaning solvent

to clean the wooden panels and speaker

cloth.

• Clean the leather handles with a slightly

damp soft cloth which is dipped in a

leather cleaning solution, then buff the

leather with a dry soft cloth.

• The wooden panels and leather handles

may vary on color and grain pattern due

to the use of natural materials.

Care of the environment

Disposal of your old product and battery

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

This symbol on a product means that the

product is covered by European Directive

2012/19/EU.

This symbol means that the product contains

a built-in rechargeable battery covered by

European Directive 2013/56/EU which cannot

be disposed of with normal household waste.

We strongly advise you to take your product to

an ofcial collection point or a Philips service

centre to have a professional remove the

rechargeable battery.

Inform yourself about the local separate

collection system for electrical and electronic

products and rechargeable batteries. Follow

local rules and never dispose of the product

and rechargeable batteries with normal

household waste. Correct disposal of old

products and rechargeable batteries helps

prevent negative consequences for the

environment and human health.

Compliance

This product complies with the radio

interference requirements of the European

Community.

Hereby, Gibson Innovations declares that

this product is in compliance with the

essential requirements and other relevant

provisions of Directive 1999/5/EC.You

can nd the Declaration of Conformity on

www.p4c.philips.com.

4EN

Help and support

For extensive online support, visit

www.philips.com/support to:

• download the user manual and the quick

start guide

• watch video tutorials (available only for

selected models)

• nd answers to frequently answered

questions (FAQs)

• email us a question

• chat with our support representative.

Follow the instructions on the website to select

your language, and then enter your product

model number.

Alternatively, you can contact Consumer Care

in your country. Before you contact, note down

the model number and serial number of your

product. You can nd this information on the

back or bottom of your product.

Open source software

This product contains software licensed under an

open source license. For acknowledgements and

license texts, please refer to your product’s user

manual on www.philips.com/support.

Gibson Innovations Limited hereby offers

to deliver, upon request, a copy of the

corresponding source code for the necessary

open source software packages used in this

product for which such offer is requested by the

respective licenses.This offer is valid up to three

years after product purchase.To obtain source

code, please contact [email protected].

If you prefer not to use email or if you do not

receive conrmation receipt within a week after

mailing to this email address, please write to

Open Source Team, Gibson Innovations Limited,

5/F Philips Electronics Building, 5 Science Park

East Avenue, Hong Kong Science Park, Shatin,

N.T. Hong Kong.

2 Your product

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips offers, register your product

at www.philips.com/welcome.

Main unit

The main unit of this product is comprised of

left and right base speakers.

Right base speaker

a Display panel

Switch to Bluetooth mode (main unit only).

c +/- (Volume)

Increase or decrease volume.

Toggle through all sources.

• Switch this product on.

• Switch this product to ECO standby

when this product is not connected to

the network.

• Switch this product to networked

standby when this product is connect

to the network.

5EN

f NFC tag

g Red/white/orange LEDs

Red LED

• Lights up when this product is in

ECO standby (not connected to the

network).

White LED

• Blinks when this product is not

connected to the network, or when

connection error occurs.

• Lights up when this product is

connected to the network, or when

this product is in networked standby

(connected to the network).

Orange LED

• Lights up when software update is

detected.

Remote control

This section includes an overview of the

remote control.

• Switch this product on.

• Switch this product to ECO standby

when this product is not connected to

the network.

• Switch this product to networked

standby when this product is connect

to the network.

• In the network status, press and hold

to switch this product to ECO standby.

b Source buttons

• HDMI ARC: Switch your source to the

HDMI ARC connection.

6EN

• HDMI 1: Switch your source to the

HDMI IN 1 connection.

• HDMI 2: Switch your source to the

HDMI IN 2 connection.

• COAX: Switch your audio source to

the coaxial connection.

• OPTICAL: Switch your audio source

to the optical connection.

• AUDIO IN:Toggle audio source

between AUX or AUDIO IN

connection (3.5mm jack).

• USB: Switch to USB mode.

• : Switch to Bluetooth mode (main

unit only).

• SOURCE: Select an input source for

this product. Or for Spotify Premium

users, quickly resume Spotify Connect

play.

c /

Skip to the previous or next track (for

USB/ Bluetooth/ online music streaming).

Start, pause or resume play (for USB/

Bluetooth/ online music streaming).

e BASS +/-

Increase or decrease bass on the main unit.

f Volume control

• +/-: Increase or decrease volume.

• : Mute or restore volume.

: Automatically select a predened

sound mode to suit your video or music.

: Select stereo sound mode.

: Select voice clarity or

(close to me) sound mode.

: Select surround sound mode.

Press to increase or decrease volume

of the wireless surround speakers (only

applicable when the surround speakers are

wirelessly connected to the main unit (or

SOD mode switches on)).

Increase or decrease audio delay.

Turn night mode on or off.

• Press and hold to trigger calibration for

listening zone.

• Press three times to trigger calibration

for the wireless surround speakers

position.

Turn auto volume on or off.

Set the brightness of the display panel for

this product.

Increase or decrease treble on the main

unit.

Wireless surround speakers

This product comes with a pair of wireless

surround speakers.

* The illustration above is for either of wireless

surround speakers.

a Speaker LED

• Blinks in red and orange alternatively

if the surround speaker is not

wirelessly connected to the main unit.

• Lights up white when the surround

speaker is wirelessly connected to the

main unit, or when the battery capacity

is full or more than 30% remaining.

• Lights up red when the battery

capacity is less than 30% remaining.

7EN

• Blinks red when the battery capacity is

less than 10% remaining.

• Lights up orange when the surround

speaker is being charged (only for the

surround speakers docked onto the

main unit).

• Press to turn on the surround speaker

if it automatically goes to standby.

• Press and hold to switch the surround

speaker to standby.

c button/LED

• Press to switch the surround speaker

to Bluetooth mode.

• The LED blinks when you switch the

surround speaker to Bluetooth and no

Bluetooth devices are connected.

• The LED lights up when you switch

the surround speaker to Bluetooth and

Bluetooth devices are connected.

d SOD button/LED

• Press to switch the surround speaker

to SOD (surround on demand) mode.

• The LED lights up white when the

surround speaker is switched to SOD

mode.

In case of no response from the surround

speaker, press and hold with a pin for

5 seconds to reset the surround speaker

to the default settings.

Note

• If you press the button on the surround speaker, the

surround speaker disconnects the main unit (or SOD

mode switches off).

Wireless subwoofer

This product comes with a wireless subwoofer.

a Subwoofer indicator

• Blinks when the subwoofer is not

connected, or being connected, to the

main unit.

• Lights up when the subwoofer is

connected to the main unit.

• Lights off when the subwoofer goes

to standby, or wireless connection is

disconnected for 4 minutes.

b (connect)

Press to enter the pairing mode for

connection with the main unit.

c ~

Connect to the power supply.

8EN

Connectors

This section includes an overview of the

connectors available on this product.

On the left base speaker

Connect to the right base speaker with the

supplied DIN cable.

b AC MAINS~

Connect to the power supply.

On the right base speaker

a COAX

Connect to a coaxial audio output on the

TV or a digital device.

b OPTICAL

Connect to an optical audio output on the

TV or a digital device.

c USB

• Connect to a USB storage device for

audio media play.

• Upgrade software of this product.

d e gf h

Connect to the ethernet port on a

broadband modem or router.

e HDMI IN 1

Connect to the HDMI output on a digital

device.

In case of no response from the surround

speaker, press and hold with a pin for

5 seconds to reset this product to the

factory settings.

g HDMI IN 2

Connect to the HDMI output on a digital

device.

Connect to the HDMI (ARC) input on the

TV.

Connect to the left base speaker with the

supplied DIN cable.

Connect to an audio output on a device

via AUDIO IN or AUX source (by pressing

repeatedly AUDIO IN on the remote

control).

9EN

3 Connect and set

This section helps you connect this product to a

TV and other devices, and then set it up.

For information about the basic connections of

this product and accessories, see the quick start

guide.

Note

• For identication and supply ratings, see the type plate

at the back or bottom of the product.

• Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Connect the main unit

With the supplied DIN cable, connect the left

base speaker to the right base speaker as main

unit. See the quick start guide for details.

Caution

• When you plug the supplied DIN cable into the

connectors on the main unit, make sure that you plug

the DIN cable in the correct orientation to prevent

product damage.

Network setup prompt

When this product is turned on for the

rst time, or network is not setup, you are

prompted to set up the network to stream

music from the online music apps.

» The network setup prompt is displayed

on the display panel of this product.

» The white LED on the right base

speaker blinks.

• To initialize network setup, see “Google

Cast™ and Spotify Connect”.

• To skip network setup, select other audio

input source.

Charge speakers

If the wireless surround speaker is undocked

from the main unit, its battery level is indicated

by the indicators on the wireless speaker.

• Light up white: full battery or more than

30% capacity remaining

• Light up red: low battery level, less than

30% remaining

• Blink red: near empty, less than 10%

remaining

1 Dock the left and right wireless speakers

onto the main unit (left and right base

speakers) to charge the speakers.

2 Turn on the main unit.

» During charging, the orange LED on

the wireless speaker lights up.

» When fully charged, the orange LED

on the wireless speaker turns off.

Note

• It may take around 3 hours to fully charge the speakers.

Andere Handbücher für Fidelio E6

Inhaltsverzeichnis

Andere Philips Lautsprechersystem Handbücher

Philips

Philips LBC 2502/10 Bedienungsanleitung

Philips

Philips HTL3310/10 Bedienungsanleitung

Philips

Philips 2000 series Bedienungsanleitung

Philips

Philips Essence 5000 Series Bedienungsanleitung

Philips

Philips F1385 Bedienungsanleitung

Philips

Philips Fidelio B97 Bedienungsanleitung

Philips

Philips HTS3111/05 Bedienungsanleitung

Philips

Philips everplay BT6900 Bedienungsanleitung

Philips

Philips MMS460 - MMS 460 5.1-CH PC Multimedia Home Theater Speaker... Bedienungsanleitung

Philips

Philips TAB8505 Bedienungsanleitung

Philips

Philips MMS221/00 Referenzhandbuch

Philips

Philips HTL1182B Bedienungsanleitung

Philips

Philips HTL2111A/96 Bedienungsanleitung

Philips

Philips HTL2160 Bedienungsanleitung

Philips

Philips FB209W Bedienungsanleitung

Philips

Philips AECS7000E Produktinformationsblatt

Philips

Philips HTL1190B/05 Bedienungsanleitung

Philips

Philips SPA1312 Bedienungsanleitung

Philips

Philips HTL3140B Bedienungsanleitung

Philips

Philips A 2.300 Compact Power Bedienungsanleitung

Philips

Philips MMS 305 Bedienungsanleitung

Philips

Philips HTL2160/77 Bedienungsanleitung

Philips

Philips FB 208W Bedienungsanleitung

Philips

Philips HTL3160S Bedienungsanleitung

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung