Philips 8000 Series Bedienungsanleitung

User manual

www.philips.com/support

Conference

Speaker

8000 Series

AECS8100

2 3ENEN

Contents

1 Important safety instructions 3

Safety 3

Care for your product 4

Care of the environment 4

Declaration of conformity 4

Trademarks 4

FCC information 5

FCC & IC Radiation Exposure

Statement 5

2 Your conference speaker 7

Introduction 7

What’s in the box 7

Overview of the speaker 7

3 Get started 8

Charge the built-in battery 8

Turn on and o 9

Adjust the volume 9

Trigger voice assistant of your

mobile device 9

Control playback 9

4 Connect your conference

speaker 10

Connect via USB-C dongle 10

Connect the speaker to your

Bluetooth device 10

Clear Bluetooth connection history 11

Connect via USB-C charging cable 11

5 Use your conference speaker 11

Use as a speakerphone 11

Pairing for stereo mode 12

6 Product specications 13

7 Troubleshooting 14

General 14

Bluetooth 14

2 3ENEN

1 Important

safety

instructions

Read and understand all instructions

before you use your speaker. If damage

is caused by failure to follow instructions,

the warranty does not apply.

Be sure to include all documents when

passing this product on to others.

Keep these instructions for use for future

reference.

Safety

Important safety instructions

• Make sure that the power supply

voltage corresponds to the voltage

of the unit.

• The speaker shall not be exposed to

dripping or splashing.

• Do not place any source of danger

on the speaker (e.g. liquid lled

objects, lit candles).

• Make sure that there is enough

free space around the speaker for

ventilation.

• Please use the speaker safely in an

environment with temperature

between 0°C and 45°C.

• Only use attachments and

accessories specied by the

manufacturer.

Battery safety precautions

• Danger of explosion if a battery is

incorrectly replaced. Replace only

with the same or equivalent type.

• A battery (battery pack or battery

installed) shall not be exposed to

excessive heat such as sunshine, re,

or the like.

• A battery in extreme high or low

temperatures during use, storage or

transportation, and low air pressure

at high altitude can pose safety

hazards.

• Do not replace a battery with an

incorrect type that can defeat a

safeguard (for example, some lithium

battery types).

• Disposing a battery into re or a

hot oven, mechanically crushing or

cutting a battery can result in an

explosion.

• Leaving a battery in an extremely

high temperature surrounding,

or an extremely low air pressure

environment may result in an

explosion or leakage of ammable

liquid or gas.

Warning

• Never leave children unsupervised

with the packaging material.

The packaging material poses

a suocation hazard. Children

frequently underestimate dangers.

• Always keep children and pets away

from the product.

• Never remove the casing of this

speaker.

• Never lubricate any part of this

speaker.

• Place this speaker on a at, hard and

stable surface.

• Never place this speaker on other

electrical equipment.

• Only use this speaker indoors. Keep

this speaker away from water,

moisture and liquid-lled objects.

• Keep this speaker away from direct

sunlight, naked ames or heat.

• Risk of explosion if a battery is

replaced by an incorrect type.

4 5ENEN

Declaration of conformity

This product complies with the radio

interference requirements of the

European community. Hereby, MMD

Hong Kong Holding Limited declares

that the product is in compliance with

the essential requirements and other

relevant provisions of RED Directive

2014/53/EU and UK Radio Equipment

Regulations SI 2017 No 1206. You can

nd the Declaration of Conformity on

www.philips.com/support.

Trademarks

The Bluetooth® word mark and logos

are registered trademarks owned

by Bluetooth SIG, Inc. and any use

of such marks by MMD Hong Kong

Holding Limited is under license. Other

trademarks and trade names are those of

their respective owners.

Care for your product

Only use a dry microber cloth to clean

the product.

Care of the environment

Disposal of your old product and

battery

Your product is designed and

manufactured with high quality

materials and components, which

can be recycled and reused.

This symbol on a product means

that the product is covered by

European Directive 2012/19/EU.

This symbol means that the product

contains batteries covered by

European Directive 2013/56/EU

which cannot be disposed of with

normal household waste. Inform

yourself about the local separate

collection system for electrical and

electronic products and batteries.

Follow local rules and never dispose

of the product and batteries with

normal household waste. Correct

disposal of old products and

batteries helps prevent negative

consequences for the environment

and human health.

All unnecessary packaging has been

omitted. We have tried to make the

packaging easy to separate into three

materials: cardboard (box), polystyrene

foam (buer) and polyethylene (bags

and protective foam sheet).

Your product consists of materials

which can be recycled and reused if

disassembled by a specialized company.

Please observe the local regulations

regarding disposal of packaging

materials, exhausted batteries and old

equipment.

4 5ENEN

FCC information

This device complies with part 15 of the

FCC Rules. Operation is subject to the

following two conditions:

1 This device may not cause harmful

interference, and

2 This device must accept any

interference received, including

interference that may cause

undesired operation.

NOTE: This equipment has been tested

and found to comply with the limits

for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits

are designed to provide reasonable

protection against harmful interference

in a residential installation. This

equipment generates, uses and can

radiate radio frequency energy and, if

not installed and used in accordance

with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does

cause harmful interference to radio

or television reception, which can be

determined by turning the equipment

o and on, the user is encouraged to

try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving

antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an

outlet on a circuit dierent from that

to which the receiver is connected.

• Consult the dealer or an experienced

radio / TV technician for help.

IC-Canada:

CAN ICES-003(B)/NMB-003(B)

This device contains license-exempt

transmitter(s)/receiver(s) that comply

with Innovation, Science and Economic

Development Canada’s license-exempt

RSS(s). Operation is subject to the

following two conditions:

1 This device may not cause

interference.

2 This device must accept any

interference, including interference

that may cause undesired operation

of the device.

FCC & IC Radiation

Exposure Statement

• This equipment complies with FCC

and Canada radiation exposure

limits set forth for an uncontrolled

environment.

• This equipment should be installed

and operated with minimum

distance 20cm between the radiator

and your body.

• This transmitter must not be co-

located or operated in conjunction

with any other antenna or

transmitter.

WARNING

Changes or modications to this unit

not expressly approved by the party

responsible for compliance could void

the user’s authority to operate the

equipment.

6 7ENEN

IC-Canada :

CAN ICES-003(B)/NMB-003(B)

L’émetteur/récepteur exempt de licence

contenu dans le présent appareil est

conforme aux CNR d’Innovation, Sciences

et Développement économique Canada

applicables aux appareils radio exempts

de licence. L’exploitation est autorisée

aux deux conditions suivantes :

1 L’appareil ne doit pas produire de

brouillage;

2 L’appareil doit accepter tout

brouillage radioélectrique

subi, même si le brouillage est

susceptible d’en compromettre le

fonctionnement.

Déclaration de la FCC et IC sur

l’exposition aux rayonnements

• Cet équipement est conforme

aux limites d’exposition aux

rayonnements de la FCC et

du Canada établies pour un

environnement non contrôlé.

• Pour rester en conformité avec les

consignes d’exposition aux RF, placez

le produit à au moins 20 cm des

personnes proches.

• Cet émetteur ne doit pas coexister ou

fonctionner avec une autre antenne

ou un autre émetteur.

AVERTISSEMENT

Les changements ou modications

de cet appareil non expressément

approuvées par la partie responsable

de la conformité pourraient annuler

l’autorisation de l’utilisateur à utiliser

l’équipement.

Informations de la FCC

Cet appareil est conforme à la partie 15

des règles de la FCC. Son fonctionnement

est soumis aux deux conditions suivantes :

1 ce dispositif ne peut pas causer

d’interférences nuisibles et

2 cet appareil doit accepter toute

interférence reçue, y compris les

interférences qui peuvent causer un

mauvais fonctionnement.

Remarque : cet équipement a été soumis

à des essais et a été déclaré conforme

aux limites stipulées pour un appareil

numérique de classe B, conformément

aux spécications de la partie 15 du

règlement de la FCC. Ces limites ont pour

but d’assurer une protection raisonnable

contre le brouillage nuisible dans une

installation résidentielle. Cet équipement

produit, utilise et peut émettre de

l’énergie en radio fréquence et, s’il n’est

pas installé et utilisé conformément aux

directives, il peut causer un brouillage

nuisible dans les communications radio.

Cependant, il est impossible de garantir

qu’aucun brouillage ne se produira

dans une installation particulière. Si

cet équipement cause un brouillage de

la réception de radio ou de télévision,

ce qu’il est possible de déterminer

en éteignant puis en rallumant

l’équipement, l’utilisateur est prié

d’essayer de corriger le brouillage au

moyen de l’une ou de plusieurs des

mesures suivantes :

• Réorienter ou déplacer l’antenne de

réception.

• Augmenter la distance entre

l’appareil et le récepteur.

• Brancher l’appareil à une prise sur un

circuit diérent de celui sur lequel le

récepteur est branché.

• Consulter le revendeur ou un

technicien radio/TV expérimenté.

6 7ENEN

2 Your

conference

speaker

Congratulations on your purchase, and

welcome to Philips! To fully benet from

the support that Philips oers, register

your conference speaker at

www.philips.com/support.

Introduction

With this conference speaker you can:

• make conference calls or play music

from a phone which is connected to

the speaker via Bluetooth;

• make conference calls or play music

from a PC which is connected to

the speaker via the supplied USB-C

dongle;

• make conference calls or play music

from a PC which is connected to

the speaker via the supplied USB-C

charging cable.

What’s in the box

Check and identify the items in the

package:

• Conference speaker

• USB-C charging cable

• USB-C to USB-A converter

• USB-C dongle

• Pouch

• Quick start guide

• Safety sheet

• Global warranty

Overview of the speaker

a On/O key

Press and hold to turn the unit on

and o.

b Bluetooth key

Press and hold to disconnect the

connected Bluetooth device.

c + (Volume) key

Increase the volume.

d - (Volume) key

Decrease the volume.

e Mute key

Mute or restore volume.

f Answer/Reject key

Press to answer a call; press and hold

to reject a call.

g Play/Pause key

Start or pause play.

h Music mode

Stereo Pairing key

89ENEN

USB-C charging port

j USB-C dongle

3 Get started

Charge the built-in

battery

• In "power on" mode, if the battery

level is less than 10%, a prompt tone

is heard every three minutes and the

backlights of the 8 keys blink red,

until the speaker is charged or turns

o.

• Connect the supplied USB-C charging

cable to the charging port of the

speaker and the USB wall outlet

(5V 2A).

Input: 5V 2A

Warning!

• If you are not going to use the speaker for a

long time, turn it o and be sure to unplug its

USB-C charging cable from the power outlet.

• When charging the speaker in

"power o" mode, the backlights of

all keys blink red three times (once

every second) and then turn o.

After that, the backlight of the

On/O key turns solid red, and then

turns o when fully charged.

• When charging the speaker in

"power on" mode, the backlights of

all keys blink red three times (once

every second) and then turn o.

After that, the backlight of the

On/O key blinks white and red

alternately, and then returns to the

current status when fully charged.

89ENEN

Turn on and o

• Press and hold for 3 seconds to

turn on the speaker. A prompt tone

is heard and the backlight of the

On/O key turns solid, while the

backlights of the other keys turn

solid white and after 3 seconds

dim. In "power on" mode, press and

hold for 3 seconds to turn o the

speaker. A prompt tone is heard and

the backlight of the On/O key

turns o.

Tip

• The speaker turns o automatically if there is

no audio signal from Bluetooth or no Bluetooth

device is connected for 15 minutes.

Adjust the volume

• Press Volume +/- keys to increase or

decrease the volume.

• Press and hold Volume +/- keys to

continuously increase or decrease

the volume. A prompt tone will be

heard when the volume reaches its

maximum or minimum level.

Trigger voice assistant of

your mobile device

• Press and hold on the speaker

for 3 seconds to activate the voice

assistant on the mobile device

connected to the speaker via

Bluetooth.

Control playback

• Press on the speaker to pause and

resume playback.

• Press and hold on the speaker to

skip to next track.

10 11ENEN

4 Connect your

conference

speaker

Connect via USB-C dongle

• Press and hold for 3 seconds to

turn on the speaker. Plug the USB-C

dongle into the USB port of your PC.

• After the driver is installed on your

PC, the PC will automatically be

connected to the PhilipsAECS8100

speaker via the USB-C dongle.

• On your computer, select

“PhilipsAECS8100” from the

speaker list, the music will be played

through this speaker.

Connect the speaker to

your Bluetooth device

• Press and hold for 3 seconds to

turn on the speaker, the speaker

automatically enters Bluetooth

mode, and the backlight of the

Bluetooth key blinks white.

On the Bluetooth device, turn on

Bluetooth, search for and select

“PhilipsAECS8100” to connect

(enter password "0000" if prompted).

Once the Bluetooth connection is

successful, the backlight of the

Bluetooth key turns solid white and

a prompt tone is heard. Play audio

on your Bluetooth device to start

music streaming.

• To disconnect the Bluetooth

connection, press and hold the

Bluetooth key for 3 seconds until

the backlight of the Bluetooth key

blinks white and a prompt tone is

heard.

• When the speaker is restarted, it will

automatically be reconnected to the

last connected Bluetooth device.

Note

• The maximum operational range between the

speaker and a Bluetooth device is approximately

20 meters.

• In Bluetooth mode, the Play/Pause, Volume

+/- and Answer/Reject keys are eective.

Andere Handbücher für 8000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Sprecher Handbücher

Philips

Philips HSB3280 Bedienungsanleitung

Philips

Philips SPA2200 Bedienungsanleitung

Philips

Philips SPA1330 Betriebsanleitung

Philips

Philips SB3300 Bedienungsanleitung

Philips

Philips HTB5150K Bedienungsanleitung

Philips

Philips SBCBC710/00 Bedienungsanleitung

Philips

Philips HTL3140B Bedienungsanleitung

Philips

Philips SPA7300/00 Bedienungsanleitung

Philips

Philips SPA5200 Bedienungsanleitung

Philips

Philips HTL5130B Bedienungsanleitung

Philips

Philips NTRX700 Produktinformationsblatt

Philips

Philips HTB9150 Bedienungsanleitung

Philips

Philips AD7050W/37 Bedienungsanleitung

Philips

Philips BT100 Produktinformationsblatt

Philips

Philips TAVS500 Bedienungsanleitung

Philips

Philips SPA7360/10 Bedienungsanleitung

Philips

Philips MMS231 Bedienungsanleitung

Philips

Philips LSBS900/00S Bedienungsanleitung

Philips

Philips Fidelio P9 Bedienungsanleitung

Philips

Philips HTB3510 Bedienungsanleitung

Philips

Philips HTL3160B Bedienungsanleitung

Philips

Philips 1000 Series Bedienungsanleitung

Philips

Philips HTL2100/93 Bedienungsanleitung

Philips

Philips AW5000 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung