Philips AD7000W/93 Bedienungsanleitung

www.philips.com/welcome

AD7000W/93

User manual

English

Contents

1 Important 2

Safety 2

Notice 3

2 Your Entertainment System 4

Introduction 4

What's in the box 4

What else you need 4

Overview of the main unit 5

Get started to use AirPlay 5

3 Prepare 6

Connect power 6

Turn AD7000W on 6

4 Connect to your home Wi-Fi

network for AirPlay 7

Scenario 1: Connect to a WPS router 7

Scenario 2: Connect to a non-WPS

router 8

5 Play 14

Stream audio from your iTunes music

library to AD7000W 14

Control play 16

Use advanced sound settings 16

Play/charge your iPod/iPhone/iPad

through USB socket 16

Play from an external device 17

  18

 

 

7 Product information 20

 

8 Troubleshooting 21

2EN

1 Important

Safety

Important Safety Instructions

a Read these instructions.

b Keep these instructions.

c Heed all warnings.

d Follow all instructions.

e Do not use this apparatus near water.

f Clean only with dry cloth.

g Do not block any ventilation openings.

Install in accordance with the

manufacturer's instructions.

h Do not install near any heat sources such

as radiators, heat registers, stoves, or



produce heat.

i Protect the power cord from being

walked on or pinched, particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.

j Only use attachments/accessories



k Use only with the cart, stand, tripod,



manufacturer or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

l Unplug this apparatus during lightning

storms or when unused for long periods

of time.

m !"!

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

n Apparatus shall not be exposed to

dripping or splashing.

o Do not place any sources of danger on

"#



p Where the MAINS plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

Warning

 Never remove the casing of this apparatus.

 Never lubricate any part of this apparatus.

 Never place this apparatus on other electrical

equipment.

 Keep this apparatus away from direct sunlight, naked



 Ensure that you always have easy access to the power

cord, plug or adaptor to disconnect this apparatus from

the power.

Risk of overheating! Never install this apparatus



at least four inches around this apparatus for

ventilation. Ensure curtains or other objects

never cover the ventilation slots on this

apparatus.

English

Notice



device that are not expressly approved by

Philips Consumer Lifestyle may void the user’s

authority to operate the equipment.

Disposal of your old product and

batteries

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

Never dispose of your product with other

household waste. Please inform yourself about

the local rules on the separate collection of

electrical and electronic products and batteries.

The correct disposal of these products helps

prevent potentially negative consequences on

the environment and human health.

Please visit www.recycle.philips.com for

additional information on a recycling center in

your area.

Environmental information

All unnecessary packaging has been omitted.

We have tried to make the packaging easy to

separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can

be recycled and reused if disassembled by

a specialized company. Please observe the

local regulations regarding the disposal of

packaging materials, exhausted batteries and old

equipment.

“Made for iPod,”“Made for iPhone,” and “Made

for iPad” mean that an electronic accessory



iPod, iPhone, or iPad, respectively, and has



Apple performance standards. Apple is not

responsible for the operation of this device

or its compliance with safety and regulatory

standards. Please note that the use of this

accessory with iPod, iPhone, or iPad may affect

wireless performance.

AirPlay, iPod, and iPhone are trademarks of

Apple Inc., registered in the U.S. and other

countries. iPad is a trademark of Apple Inc.

Class II equipment symbol:

CLASS II apparatus with double insulation, and

no protective earth provided.

Note

 The type plate is located on the bottom of the

apparatus.

4EN

2 Your

Entertainment

System

Congratulations on your purchase, and



support that Philips offers, register your product

at www.philips.com/welcome.

If you contact Philips, you will be asked for the

model and serial number of this apparatus.The

model number and serial number are on the

bottom of the apparatus.Write the numbers

here:

Model No. __________________________

Serial No. ___________________________

Introduction

Apple AirPlay technology enables you to play

your iTunes music library, hosted on a Mac, PC,

iPhone, iPod touch, or iPad on any AirPlay-

enabled device (for example, your AD7000W)

connected to the Wi-Fi network.

With an AirPlay-enabled device (for example,

your AD7000W), you can:

 stream audio from your iTunes music

library to any room in your house

 choose which AirPlay-enabled devices

you want to play music on (if you have

more than one such devices in your

house)

 stream audio to multiple AirPlay-

enabled devices at the same time

(from the iTunes music library on your

PC/Mac only)

Tip

 Please visit www.philips.com/welcome for information

about more Philips AirPlay-enabled devices.

With AD7000W, you can also:

 charge your iPod/iPhone/iPad through

the USB socket with an Apple USB

cable (not supplied).

 play your iTunes music library on your

iPod/iPhone/iPad through the USB

socket directly while charging.

 play music from other audio devices

through the MP3-LINK socket.

What's in the box

Check and identify the contents of your package:

 Main unit (with a built-in Wi-Fi module)

 1 x AC power adapter

 1 x MP3 link cable

 User manual (in CD-ROM)

 Quick start guide

What else you need

To stream audio wirelessly by AirPlay, you need:

 

 A host for your iTunes music library,

for example, an iPod touch/iPhone/

iPad installed with iOS 4.3 (or later) or

a Wi-Fi enabled PC/Mac installed with

iTunes 10 (or later)

Your AD7000W should be connected to the

same local network as your iTunes host device

through the Wi-Fi router.

List of compatible iTunes host devices

for AirPlay

In terms of AirPlay, AD7000W is compatible with:

 a Wi-Fi enabled PC/Mac installed with

iTunes 10 (or later); and

 the following iPod/iPhone/iPad models

installed with iOS 4.3 (or later):

 iPad 2

 iPad

English

 iPhone 4

 iPhone 3GS

 iPod touch (2nd, 3rd, and 4th

generation)

Overview of the main unit

a Power indicator

 Turn the unit on/off.

 (Press and hold) reset the unit.

c +/-

 Adjust volume.

d WI-FI SETUP button/indicator

 Connect the unit to a Wi-Fi network.

 Show the Wi-Fi connection status of

the unit.

e MP3-LINK

 Connect an external audio player

through the supplied MP3 link cable.

f DC IN

 Connect the power adaptor.

g USB

 Connect an iPod/iPhone/iPad through

an Apple USB cable (not supplied).

Get started to use AirPlay

To get started with AirPlay, you need to:

1 Upgrade your iPod touch/iPhone/iPad to

the latest iOS version (iOS 4.3 or later).

 Or install the latest version of iTunes

(iTunes 10 or later) on your PC/Mac.

2 Connect power to AD7000W, then turn it

on (see 'Prepare' on page 6).

3 Connect AD7000W to your existing

home Wi-Fi network (see 'Connect to

your home Wi-Fi network for AirPlay' on

page 7).

4 Make sure that your iPod touch/iPhone/

iPad or PC/Mac are also connected to the

same Wi-Fi network.

6EN

3 Prepare

Always follow the instructions in this chapter in

sequence.

Connect power

Caution

 Risk of product damage! Make sure that the power

supply voltage matches the voltage printed on the

bottom of the unit.

 Risk of electric shock! When you unplug the AC

adaptor, always pull the plug from the socket. Never

pull the cord.

 Before you connect the AC adaptor, make sure that you

have completed all the other connections.

 Connect the AC power cord to

 the DC IN socket on the back of the

unit.

 the wall power socket.

Turn AD7000W on

1 Press on the back to turn the unit on.

2 Wait for successful boot-up of the unit.

» The boot-up takes about 35 seconds.

» During boot-up, the Wi-Fi SETUP

indicator on the back of the unit blinks

green quickly.

» After boot-up, if no Wi-Fi connection

has been set up for AD7000W, the

Wi-Fi SETUP indicator starts to blink

green slowly.

 To switch the unit to Eco standby mode,

press again.

 To switch the unit on from Eco standby

mode, press again.

Tip

 If the unit stays idle for more than 30 minutes, the unit

turns off automatically.You can change this setting on

the Philips Fidelio application available on the App

Store. It is a free application offered by Philips.

English

4 Connect to

your home Wi-

Fi network for

AirPlay

To connect AD7000W to your existing home

Wi-Fi network, you need to apply your home

Wi-Fi settings to AD7000W.

You can do this in two ways (depending on

which type of Wi-Fi router you use):

 Automatically - if your Wi-Fi router is

WPS (Wi-Fi Protected Setup)-enabled

and supports PBC (Push Button

Connection) (see 'Scenario 1: Connect

to a WPS router' on page 7)

 Manually - if your Wi-Fi router does

not support WPS (see 'Scenario 2:

Connect to a non-WPS router' on

page 8)

Once connected successfully, AD7000W will

remember your home Wi-Fi settings.Then

you can enjoy AirPlay whenever AD7000W is

powered on and connected to your home Wi-

Fi network automatically.

Before connection of AD7000W to you home

Wi-Fi network, check the points below.

1 Make sure that your Wi-Fi router is

powered on and working properly.

2 Make sure that AD7000W has been

powered on and booted up successfully

(see 'Turn AD7000W on' on page 6).

3 Identify the type of your Wi-Fi router (see

the user manual of your Wi-Fi router for

details).

Scenario 1: Connect to a

WPS router

Note

 Before you press any button on AD7000W, make sure

that AD7000W has been booted up successfully (see

'Turn AD7000W on' on page 6).

1 Press the WPS button on your home Wi-Fi

router.

2 Shortly after step 1, press Wi-Fi SETUP on

the back of AD7000W.

» The Wi-Fi SETUP indicator blinks red,

yellow and green alternately.

» Within 2 minutes, the WI-FI SETUP

indicator stops blinking and stays green,

and the unit beeps.

» AD7000W is connected to your home

Wi-Fi network successfully.

WPS

8EN

Tip

 For some Wi-Fi routers, you may need to hold the

WPS button for Wi-Fi connection or enable the WPS





 If the Wi-Fi SETUP indicator on AD7000W blinks

yellow, it means that the Wi-Fi connection has failed.

Please wait for 2 minutes and try again. If the problem

remains, try to set up the Wi-Fi connection manually

(see 'Scenario 2: Connect to a non-WPS router' on

page 8).

 If the Wi-Fi connection fails again, press and hold on

the back of AD7000W to reset it, and then try again.

Scenario 2: Connect to a

non-WPS router

Note

 You can also follow the procedures below to connect

AD7000W to a WPS router manually.

To connect AD7000W to a Wi-Fi router

manually, you need access to AD7000W's



its internal Wi-Fi settings.To do so, you need a

Wi-Fi enabled device with an Internet browser

for temporary Wi-Fi connection to AD7000W.

The Wi-Fi enabled device can be an iPod touch/

iPhone/iPad or a Wi-Fi enabled PC/Mac.

Follow the sequence below for connection of

AD7000W to a non-WPS Wi-Fi router.

1 Collect settings of your home Wi-Fi router

and write down on paper for use during

AD7000W Wi-Fi setup (see 'Collect

settings of your home Wi-Fi router' on

page 8).

2 Switch AD7000W to Assisted Wi-Fi Setup

mode (see 'Switch AD7000W to Assisted

Wi-Fi Setup mode' on page 9).

» A new Wi-Fi network created by

AD7000W will appear, with the

network name (SSID) of Philips Fidelio

AirPlay.

3 Connect your Wi-Fi enabled device to the

created new Wi-Fi network temporarily

(see 'Connect your Wi-Fi enabled device

to the newly created Wi-Fi network' on

page 9).

4 Open the built-in web page of AD7000W

with the Internet Browser of your Wi-Fi

enabled device (see 'Open the built-in web

page of AD7000W' on page 11).

5 Change the internal Wi-Fi settings of

AD7000W based on the settings you

wrote on paper at step 1 (see 'Change the

internal Wi-Fi settings of AD7000W' on

page 12).

6 Restore your Wi-Fi enabled device back

to your existing home Wi-Fi settings (see

'Restore your Wi-Fi enabled device back

to your existing home Wi-Fi setting' on

page 12).

Collect settings of your home Wi-Fi

router

Note

 Always consult the user manual of your home Wi-Fi

router for detailed instructions.

1 Connect your Wi-Fi enabled device to

your existing home Wi-Fi network.

2 Launch the Internet browser (for example,

Apple Safari or Microsoft Internet

Explorer) on your Wi-Fi enabled device.

English

3 

home Wi-Fi router.

4 Find the Wi-Fi settings tab and write down

the following information on paper:

A Network name (SSID)

B Wi-Fi security mode (usually WEP,

WPA or WPA2 if enabled)

C Wi-Fi password (if Wi-Fi security is

enabled)

D DHCP mode (enabled or disabled)

E Static IP address settings (if DHCP

mode is disabled)

Switch AD7000W to Assisted Wi-Fi

Setup mode

Note

 Before you press any button on AD7000W, make sure

that AD7000W has been booted up successfully (see

'Turn AD7000W on' on page 6).

 Press and hold Wi-Fi SETUP on the back

of AD7000W for more than 5 seconds.

» The Wi-Fi SETUP indicator blinks

green and yellow alternately.

» A new Wi-Fi network created by

AD7000W will appear, with the

network name (SSID) of Philips Fidelio

AirPlay.

» It may take up to 45 seconds for

successful creation of this new Wi-Fi

network.

Note

 

the new Wi-Fi network created by AD7000W will

disappear.

 If you fail to enter Assisted Wi-Fi Setup mode, power

off AD7000W and power on it, then try again after

successful boot-up.

 Make sure that there are no other Philips AirPlay-

enabled devices in Assisted Wi-Fi Setup mode at the

same time. Multiple Wi-Fi networks created this way

may interfere with each other.

Connect your Wi-Fi enabled device

to the newly created Wi-Fi network

The new Wi-Fi network created by AD7000W

only allows access of one Wi-Fi enabled device.

To avoid interference from any other Wi-Fi

devices, you are recommended to temporarily

disable the Wi-Fi function on your other Wi-Fi

devices.

Option 1: Use your iPod touch/iPhone/iPad

1 Select Settings -> Wi-Fi on your iPod

touch/iPhone/iPad.

Andere Handbücher für AD7000W/93

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Sprecher Handbücher

Philips

Philips SHOQBOX SB7200 Bedienungsanleitung

Philips

Philips SPA2335 Bedienungsanleitung

Philips

Philips Fidelio HTL7180 Bedienungsanleitung

Philips

Philips Fidelio DS3880W/10 Bedienungsanleitung

Philips

Philips HTL2100/93 Bedienungsanleitung

Philips

Philips SPA6350/10 Bedienungsanleitung

Philips

Philips SGC5102BD - amBX 2.1-CH PC Multimedia Speaker... Bedienungsanleitung

Philips

Philips HSB3280 Bedienungsanleitung

Philips

Philips TAX5206 Bedienungsanleitung

Philips

Philips HTL2160 Bedienungsanleitung

Philips

Philips HTL1180B Bedienungsanleitung

Philips

Philips SBCBA140/00 Bedienungsanleitung

Philips

Philips SBCBA120/00 Bedienungsanleitung

Philips

Philips SPA4350/10 Bedienungsanleitung

Philips

Philips SPA2360 Bedienungsanleitung

Philips

Philips SPA7650/05 Bedienungsanleitung

Philips

Philips HTL1180B Bedienungsanleitung

Philips

Philips MMS 223 Bedienungsanleitung

Philips

Philips HTL3160B Bedienungsanleitung

Philips

Philips SBT30 Bedienungsanleitung

Philips

Philips Fidelio FS1 Bedienungsanleitung

Philips

Philips CSS2113B Bedienungsanleitung

Philips

Philips HTS7140/12 Bedienungsanleitung

Philips

Philips MMS3160B Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung