Philips BT5580 Bedienungsanleitung
www.philips.com/support
User manual
Always there to help you
Register your product and get support at
Question?
Contact
Philips
BT5580/BT5880
1EN
Contents
1 Important 2
2 Your Bluetooth speaker 3
Introduction 3
What's in the box 3
Overview of the speaker 4
3 Get started 5
Power supply 5
Turn on 5
4 Use Bluetooth devices 6
Connect a device 6
Play from Bluetooth device 7
Control your phone call 7
Disconnect the Bluetooth-enabled device 7
Enter Bluetooth pairing mode 7
Connect another Bluetooth-enabled
device 7
5 Other features 8
Listen to an external device 8
Charge your mobile devices 8
Adjust volume 8
Reset the speaker 8
6 Product information 9
Specications 9
7 Troubleshooting 10
General 10
About Bluetooth device 10
8 Notice 11
Compliance 11
Care of the environment 11
Trademark notice 12
2EN
1 Important
Warning
•Never remove the casing of this speaker.
•Never lubricate any part of this speaker.
•Never place this speaker on other electrical equipment.
•Keep this speaker away from direct sunlight, naked
amesorheat.
•Make sure that you always have easy access to the
power cord, plug, or adaptor to disconnect the speaker
from the power.
• Make sure that there is enough free space
around the speaker for ventilation.
• The battery shall not be exposed to
excessiveheatsuchassunshine,reorthe
like.
• Use only power supplies listed in the user
manual.
• The speaker shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on
thespeaker(e.g.liquidlledobjects,lighted
candles).
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Note
•The type plate is located on the bottom of the product.
3EN
2 Your Bluetooth
speaker
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this speaker, you can
• enjoy audio from your Bluetooth-enabled
devices or other external audio devices;
and
• charge mobile devices through the micro
USB socket.
What's in the box
Check and identify the contents of your
package:
• Main unit
• AC/DC adaptor
• Short user manual
• Safetyandnoticeleaet
Short User Manual
www.philips.com/welcome
Always there to help you
Registeryour product and get support at
Question?
Contact
Philips
4EN
Overview of the speaker
a
• Turn the speaker on or off.
b PAIRING
• Enter Bluetooth pairing mode.
• Disconnect Bluetooth connection.
c DC IN
• Connect power.
d AUDIO IN
• Connect an external audio device.
e Reset
• Restore factory default settings.
f CHARGING
• Charge mobile devices (in AC mode).
g Volume knob
• Adjust volume.
b
c
d
e
g
i
h
f
a
h
• Answer or reject an incoming call.
• End the current phone call.
• Transfer the call to your mobile device.
i NFC
• Connect a device with NFC feature
through Bluetooth.
5EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Power supply
Either AC power or battery can be used as
power supply of this product.
Option 1: Battery power
The speaker can operate on the built-in
rechargeable battery.
Note
•Rechargeable battery has a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
•Whenbatteryislow,theLEDindicatorashesred.
To recharge the built-in battery:
• Connect the speaker to AC power supply.
Working
mode
LED status
OFF
mode
Flashing red while charging;Turned
off after fully charged.
Bluetooth/
Audio-in
mode
Flashing red in case of low battery;
Flashing blue or solid blue
(depending on Bluetooth
connection status).
Option 2:AC power
Caution
•Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the speaker.
•Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the power adaptor to:
• the DC IN socket on the speaker.
• the wall outlet.
Turn on
Press .
» The speaker switches to Bluetooth
mode.
» TheLEDindicatorashesblue.
Note
•Ifbatteryislow,theLEDindicatorashesred.
Turn off
The speaker is turned off in the following
situations:
• Press again;
• The connection with Bluetooth device or
other device is invalid for 15 minutes; or
• Music playback is stopped for 15 minutes.
DC IN
6EN
4 Use Bluetooth
devices
With this speaker, you can listen to audio from
Bluetooth-enabled devices and control the
incoming call through Bluetooth.
Connect a device
Note
•Make sure that your Bluetooth device is compatible
with this speaker.
•Before pairing a device with this speaker, read its user
manual for Bluetooth compatibility.
•The speaker can memorize a maximum of 4 paired
devices.
•Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
•Keep away from any other electronic device that may
cause interference.
Option 1: Connect a device through
NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
connect it with this speaker easily.
1 Enable NFC on your Bluetooth device
(refer to its user manual).
2 Press on this speaker.
» TheLEDindicatorashesblue.
3 Tap the NFC tag on the top of the speaker
with the NFC area of your Bluetooth
device.
4 Follow the on-screen instructions to
complete the pairing and connection.
» After successful pairing and connection,
the speaker beeps twice, and the LED
indicator turns solid blue.
Option 2: Connect a device manually
Note
•The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
1 Press .
» TheLEDindicatorashesblue.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (see the user manual of
the device).
3 When [Philips BT5580] or [Philips
BT5880] is displayed on your device,
select it to start pairing and connection.
If necessary, input “0000” as the pairing
password.
» After successful pairing and connection,
the speaker beeps twice, and the LED
indicator turns solid blue.
7EN
Play from Bluetooth device
Note
•If there is an incoming call on the connected mobile
phone, music play pauses.
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the speaker.
Control your phone call
After Bluetooth connection, you can control an
incoming call with this speaker.
Button Function
Press to answer an incoming call.
Press and hold to reject an incoming
call.
During a call, press to end the current
call.
During a call, press and hold to
transfer the call to your mobile device.
Disconnect the Bluetooth-
enabled device
• Press and hold PAIRING for two seconds;
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
» TheLEDindicatorashes.
Enter Bluetooth pairing mode
Press and hold PAIRING for two seconds.
Connect another Bluetooth-
enabled device
Disable Bluetooth on the current device, and
then connect another device.
8EN
5 Other features
Listen to an external device
With this speaker, you can also listen to an
external audio device such as an MP3 player.
Note
•Make sure that music playback through Bluetooth is
paused.
1 Connect an audio input cable (not
supplied) with a 3.5 mm connector on
both ends to
• the AUDIO IN socket on this speaker,
and
• the headphone socket on the external
device.
2 Play audio on the external device (refer to
its user manual).
Charge your mobile devices
You can charge your mobile devices through
the CHARGING socket.
Note
•The USB socket is for charging only.
In AC power supply mode, connect to your
mobile device with a USB cable (not supplied).
» Once the device is recognized, the
charging starts.
Adjust volume
Rotate the volume knob to increase or
decrease the volume.
Reset the speaker
If the system works abnormally, reset the
speaker to factory default settings.
Press the reset button with the tip of a pen or
toothpick.
» All settings are reset to factory default.
CHARGING
Andere Handbücher für BT5580
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Philips Sprecher Handbücher
Philips
Philips BM5C/98 Bedienungsanleitung
Philips
Philips SPA1500/93 Bedienungsanleitung
Philips
Philips FB651 Bedienungsanleitung
Philips
Philips SGC5103BD - amBX 2.1-CH PC Multimedia Speaker... Bedienungsanleitung
Philips
Philips HTS5120/12 Bedienungsanleitung
Philips
Philips SPA5160B Bedienungsanleitung
Philips
Philips Fidelio HTL7180 Bedienungsanleitung
Philips
Philips PB400 Bedienungsanleitung
Philips
Philips SPA7210/17 Bedienungsanleitung
Philips
Philips TAS1505 Bedienungsanleitung
Philips
Philips SBCBS020/00 Bedienungsanleitung
Philips
Philips SGC5102BD - amBX 2.1-CH PC Multimedia Speaker... Bedienungsanleitung
Philips
Philips SPA3200/17 Bedienungsanleitung
Philips
Philips LSBS8000 Bedienungsanleitung
Philips
Philips AW5000 Bedienungsanleitung
Philips
Philips FM CORDLESS SPEAKER BC8210 Bedienungsanleitung
Philips
Philips 50 T Series Bedienungsanleitung
Philips
Philips FB 840 Bedienungsanleitung
Philips
Philips Fidelio SoundSphere Bedienungsanleitung
Philips
Philips PSS010/05 Bedienungsanleitung
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung