Philips FM04FD30B/00 Bedienungsanleitung

FMXXFD30B/00

www.philips.com/welcome

USB Flash Card

EN Elite Edition Click here 2

FR Elite Edition Cliquez ici 10

DE Elite Edition Hier klicken 18

ES Elite Edition Haga clic aquí 26

NL Elite Edition Klik hier 34

IT Elite Edition Fare clic qui 42

PT Elite Edition Clique aqui 50

RU Elite Edition Щелкните здесь 58

PL Elite Edition Kliknij tutaj 66

CZ Elite Edition Klepněte zde 74

SK Elite Edition Kliknite sem 82

HU Elite Edition Kattintson ide 90

1 Important

Note:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• onsult the dealer or an experienced radio/TV technician for help.

The shielded interface cable and connectors must be used in order to

comply with the limits for digital device pursuant to subpart B of

Part 15 of FCC Rules.

Electric-, Magnetic- and Electromagnetic Fields (EMF)

Philips Royal Electronics manufactures and sells many products

targeted at consumers, which, like any electronic apparatus,

in general have the ability to emit and receive electro magnetic

signals.

One of Philips’ leading Business Principles is to take all necessary

health and safety measures for our products, to comply with all

applicable legal requirements and to stay well within the

EMF standards applicable at the time of producing products.

Philips is committed to develop, produce and market products that

cause no adverse health effects.

Philips confirms that if its products are handled properly for their

intended use, they are safe to use according to scientific evidence

available today.

Philips plays an active role in the development of international EMF

and safety standards, enabling Philips to anticipate further

developments in standardization for early integration in its

products.

Note

Keep this detailed user manual for future reference.

Warning

• To prevent fire or shock hazard, do not expose the unit to rain or

moisture.

• To avoid electric shock, do not open the cabinet. Refer servicing to

qualified personal only.

• Keep away from children. If swallowed, promptly see a doctor.

ENGLISH

Note

Data is safe in the following environments: In X-ray security systems at

airports and in magnetic fields with strengths not exeeding 3,500 Oe.

For customers in the U.S.A.

Changes or modifications made to this equipment not expressly

approved by company may void the FCC authorization to operate this

equipment.

Operation is subject to the following two conditions:

this device my not cause harmful interference, and

this device must accept any interference received, including

interference that may cause undesired operation.

Caution

You are cautioned that any changes or modifications not expressly

approved in this manual could void your authority to operate this

equipment.

For customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with Part 15 of the FCC Rules and with RSS-210

of Industry Canada.

For customers in Europe

This product conforms to the following European Directives:

89/336/EEC, 2006/95/EEC (safety directive) and 93/68/ECC (EC

Marking Directive).This product complies with EN55022 Class B and

EN55024 for use in the following areas; residential, commercial, and

light-industrial.

Notes on Use

• The USB flash drive may not function correctly if it is connected to

the computer when the computer is started up, restarted, or

restored from sleep mode.Always disconnect the USB flash drive

from the computer before performing any of these operations.

• Do not place the drive in locations that are:

– extremely hot or cold;

– vibrating;

– exposed to corrosive gases;

– dusty or dirty;

– very humid;

– exposed to direct sunlight.

• Microsoft andWindows are registered trademarks of Microsoft

Corporation in the United States and other countries.

• Mac and Macintosh are trademarks of Apple Computer, Inc.,

registered in the U.S. and other countries.

• Other system names and product names that appear in this manual

are registered trademarks or trademarks of their respective

owners. Note that the ™ and ®symbols are not used in this manual.

• Power consumption in standby mode: < 100 mA.

• Our product warranty is limited only to the USB flash drive itself,

when used normally in accordance with these operating instructions

and with the accessories that were included with this unit in the

specified or recommended system environment. Services provided

by the Company, such as user support, are also subject to these

restrictions.

• The Company cannot accept liability for damage or loss resulting

from the use of this unit, or for any claim from a third party.

ENGLISH

• The Company cannot accept any liability for: problems with your

computer or other hardware arising from the use of this product;

the suitability of this product for specific hardware, software, or

peripherals; operating conflicts with other installed software; data

loss; or other accidental or unavoidable damage.

• The Company cannot accept any liability for financial damages, lost

profits, claims from third parties, etc., arising from the use of the

software provided with this unit.

• The software specifications may be subject to change without

notice.

Environmental information

Disposal of your old product

Your product is designed and manufactured with high quality materials

and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it

means the product is covered by the European Directive 2002/96/EC.

Please inform yourself about the local separate collection system for

electrical and electronic products.

Please act according to your local rules and do not dispose of your old

products with your normal household waste.The correct disposal of

your old product will help prevent potential negative consequences for

the environment and human health.

The making of unauthorized copies of copy-protected material,

including computer programmes, files, broadcasts and sound

recordings, may be an infringement of copyrights and constitute a

criminal offence.

This equipment should not be used for such purposes.

ENGLISH

2 Your USB flash drive

Congratulations on your purchase and welcome to Philips!

To fully benefit from the support that Philips offers, register your

product at www.philips.com/welcome

3 Install

Microsoft®Windows Vista, XP, 2000, ME, MAC OS 9.0 or

higher:

• The device driver is installed automatically when the drive is

connected to a USB port of the computer. However, with some

USB 2.0 drives or boards, you may need to initiate installation

manually. In this case, follow the on-screen instructions to search for

a suitable driver. Refer to the operating system's Help file if you

need any help.

Note

Do not remove USB flash drive from the computer USB port as long

as the download process is in progress.

Windows 98SE:

Download the device driver at http://www.philips.com/storage

Slide the USB connector outward (fig. 1).

Insert the flash drive USB connector into one of the computer’s

USB ports (fig. 2).

> The New Hardware wizard starts and the drive’s LED lights up.

The light intensity of the LED will gradually increase and then

diminish again.This will continue for as long as the drive is

connected to the computer.

Click the Next button.

ENGLISH

Click Search for the best driver for your device.

Then click the Next button.

Click Specify a location.Then click the Browse button.

When the dialog box appears, specify the folder where the

installation program is stored.

Click the OK button to close the dialog box.

Then click the Next button.

Click the Next button.

Click the Finish button.

> Installation of the driver starts.

> Once the installation process is complete, a drive icon for the

USB flash drive appears in the My Computer window.

After confirming that the drive is in standby mode you can remove

the drive from the computer’s USB port.

4 Connect

Connecting the USB flash drive to your computer

Notes

• The USB flash drive can be connected directly to a USB port of

your PC or laptop. If necessary you can use the USB extension cable

supplied.

• The USB connector is located at the end of a flexible cable that is

specially designed for frequent bending and twisting.This enables

you to connect the flash drive to any free USB port of your PC or

laptop even when e.g. lots of cables make the port hard to reach

(fig. 2).

Slide the USB connector outward (fig. 1).

ENGLISH

Insert the flash drive USB connector into one of the computer’s

USB ports (fig. 3).

If necessary you can use the USB extension cable supplied (fig. 4).

> The USB flash drive’s LED lights up.The light intensity of the

LED will gradually increase and then diminish again.This will

continue for as long as the drive is connected to the computer.

5 Enjoy

Operating the USB flash drive

• Once the USB flash drive is connected to the USB port of the

computer:

– a software package will automatically start up enabling you to

activate various applications. See the software help file for further

instructions.

Visit our website www.philips.com/storage for software related

questions and software updates.

– the drive icon for the USB flash drive will appear. You can now

copy and save data on the drive by dragging files and folders on

the drive icon, just like when you copy data to a hard disk,

CD-ROM, DVD or floppy disk.

> When copying data the LED’s light intensity will quickly increase

and diminish.

Notes

• Do not remove the USB flash drive from the computer USB port

while copying and saving data otherwise the drive will no longer be

recognized by your system.

• When operating under Windows the drive name varies, depending

on yourWindows version.

ENGLISH

Disconnecting the USB flash drive from your computer

Windows®98SE

• After confirming that the USB flash drive is in standby mode you can

remove the flash drive from the computer’s USB port.

Windows®ME and Windows®2000

Double-click the Unplug or eject hardware icon in the task bar

in the lower right part of the screen.

In the window that appears, select the name of the device that is

to be removed, then click the STOP button.

When the Stop a hardware device screen appears, make sure

the correct information is displayed, then click the OK button.

When a message appears, indicating that the USB flash drive can

be safely removed, remove the USB flash drive from the

computer’s USB port.

Windows®Vista, XP

Double-click the Safely Remove Hardware icon in the task bar

in the lower right part of the screen.

In the window that appears, select the name of the device that is

to be removed, then click the STOP button.

When the Stop a hardware device screen appears, make sure

the correct information is displayed, then click the OK button.

When the message Safe to Remove Hardware appears, remove

the the USB flash drive from the computer’s USB port.

Mac OS 9.0 and higher

Drag the drive icon to the Trash.

After confirming that the the USB flash drive is in standby mode,

remove the the USB drive drive from the computer’s USB port.

ENGLISH

6 Technical specifications

Interface

• High-Speed USB 2.0 (backwards compatible with USB 1.1)

Transfer rate

• Read: max. 17MB per second / Write: max. 7MB per second

(High-speed USB 2.0 port required to achieve maximum speed)

Compatible OSs

• Microsoft® Windows®Vista, XP, 2000, ME and 98SE (with driver)

• Mac OS 9.0 or later

• Linux 2.4.0 or later

7 Need help?

Online help: www.philips.com/support

For interactive help and frequently asked questions.

For software updates and support: www.philips.com/storage

ENGLISH

1 Important

Remarque:

Soumis aux tests en vigueur, cet appareil est certifié conforme aux

limites d’un matériel numérique de classe B et répond aux

spécifications de la partie 15 des recommandations de la FCC.

Ces limites ont été conçues pour apporter une certaine protection

contre les brouillages nuisibles en environnement résidentiel.

Cet équipement crée, utilise et peut émettre de l’énergie

radioélectrique. S’il n’est pas installé et utilisé conformément aux

instructions, il risque de brouiller la réception radio et télévision.

Cependant, il ne garantit pas l’absence totale de brouillages dans

certaines installations. Si cet équipement se révèle être la source de

brouillages de ce type (ce qui peut être vérifié en le mettant sous puis

hors tension), prenez les mesures suivantes pour y remédier:

• Changez l’orientation ou l’emplacement de l’antenne de réception.

• Éloignez l’appareil du récepteur.

• Branchez l’appareil à une prise secteur différente de celle utilisée

pour le récepteur.

• Demandez de l’aide à un fournisseur ou à un technicien

radio/télévision qualifié.

Les connecteurs et le câble d’interface protégés doivent être utilisés

pour se conformer aux limites du périphérique numérique, selon la

sous-partie B de la partie 15 du règlement de la FCC.

Champs électriques, magnétiques et électromagnétiques (EME)

Philips Royal Electronics fabrique et vend de nombreux produits

de grande consommation qui, comme tous les appareils

électroniques, ont en général la capacité d’émettre et de recevoir

des signaux électromagnétiques.

L’un des premiers principes commerciaux de Philips est de

prendre toutes les mesures d’hygiène et de sécurité nécessaires

pour nos produits, de se conformer à toutes les exigences

juridiques applicables et de respecter les normes EME applicables

lors de la fabrication des produits.

Philips s’engage à développer, fabriquer et commercialiser des

produits sans effets nocifs pour la santé.

Philips confirme que, si ses produits sont utilisés correctement

dans le but pour lequel ils ont été conçus, ils sont sans danger

selon les preuves scientifiques existantes à ce jour.

Philips joue un rôle actif dans le développement des normes

internationales EME et de sécurité, ce qui lui permet de prévoir les

futurs développements de normalisation pour les intégrer le plus

tôt possible à ses produits.

Remarque

Conservez ce mode d’emploi détaillé pour vous y reporter à l’avenir.

Avertissement:

• Pour éviter tout risque de choc électrique ou d’incendie, protéger

cet appareil contre la pluie et l’humidité.

• Pour éviter les chocs électriques, ne pas ouvrir le boîtier.

Confier les réparations seulement à un réparateur qualifié.

• À tenir à l’écart des enfants. Si avalé, consulter un médecin

immédiatement.

FRANÇAIS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips Lagerung Handbücher

Philips

Philips SPE2015CC/10 Bedienungsanleitung

Philips

Philips Swarovski FM01SW40/00 Bedienungsanleitung

Philips

Philips FM02SW31/00 Bedienungsanleitung

Philips

Philips 22VP380 Bedienungsanleitung

Philips

Philips SPE2015CC/10 Bedienungsanleitung

Philips

Philips FMXXFD20B Bedienungsanleitung

Philips

Philips FM16FD00B/00 Bedienungsanleitung

Philips

Philips FM01FD05B/00 Bedienungsanleitung

Philips

Philips SPE3051CC/05B Bedienungsanleitung

Philips

Philips SPE3071CC Bedienungsanleitung

Philips

Philips FM02SW10 Bedienungsanleitung

Philips

Philips FM02SW00 Bedienungsanleitung

Philips

Philips FM04FD30B Bedienungsanleitung

Philips

Philips FM16FD25B/00 Bedienungsanleitung

Philips

Philips FM04FD20B/00 Bedienungsanleitung

Philips

Philips FM51FD10B Bedienungsanleitung

Philips

Philips FM08FD20B Bedienungsanleitung

Philips

Philips CD740RW Bedienungsanleitung

Philips

Philips FM24SS130B/00 Bedienungsanleitung

Philips

Philips FM01SW21 Bedienungsanleitung

Philips

Philips FM02SW10 Bedienungsanleitung

Philips

Philips FM51FD10B/00 Bedienungsanleitung

Philips

Philips HEART BEAT FM01SW40 Bedienungsanleitung

Philips

Philips SPD5117CC/05 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung