Philips SE65 Bedienungsanleitung
SE658
Quick start guide
1Connect
2Install
3Enjoy
Register your product and get support at
www.philips.com/welcome
What’s in the box
Handset with belt clip Base station Battery door
Bracket for wall
mounting
2 AAA rechargeable
batteries
Power supply Line cord
User manual Guarantee Do Not Return
leaflet
Quick Start Guide
In multihandset packs, you will find one or more additional handsets, battery doors,
chargers with power supply units and additional rechargeable batteries.
WARNING: Always use the line cord, power supply and batteries that came with your
phone.
1Connect
Connect the base station
2Install
Insert rechargeable batteries and charge
1. Place the base station in a central location near the telephone line socket and
electricity socket.
2. Connect the line cord and the power cable to their corresponding connectors at the
back of the base station.
3. Connect the other end of the line cord and power cable to their respective sockets.
Insert batteries Charge handset for 24 hours
AB
3Enjoy
Make a call
Dial the number (maximum 24 digits) and press tor l.
OR
Press tor lto take the line, and dial the number.
Answer a call
When the phone rings, press tor l.
End a call
To end a conversation, press h.
Adjust earpiece or speaker volume
During a call, scroll nto select from level 1 to level 5.
The descriptions above are available from the handset. With this model, making and
answering a call are also available from the base station. Refer to chapter 6 “Conventions
Used in this manual” and chapter 8 “Using your phone” in the User Manual that came
with this phone for details.
Note
Setting the ring tones
Follow the procedure below to set ring tones on the handset or base station.
1. Press min idle mode, scroll nto Personal Set, and press oSelect.
2. Scroll nto Handset Tones on the handset or Base Tones on the base and press
oSelect. Then scroll nto Ring Tones and press oSelect.
3. Scroll nto your desired melody. The melodies will play as you scroll them.
4. Press oSelect to set the ring tone.
• A validation tone is emitted and the screen returns to the previous menu.
Refer to the key chart in Chapter 6 “Conventions Used in this Manual” of the User
Manual for base station keys that correspond to the handset keys appearing in the
procedure above.
Note
Store a contact in the phonebook
1. Press m. Phonebook is highlighted; press oSelect.
2. New Entry is highlighted; press oSelect.
3. Enter Name is displayed. Enter the name of the contact (maximum 14 characters)
and press oOK.
4. Enter Number is displayed. Enter the number (maximum 24 digits) and press
oOK.
• A validation tone is emitted.
Access phonebook
1. Press dand scroll nto browse the phonebook.
2. To view the details, press oView.
Call from the phonebook
1. Press din idle mode.
2. Scroll nto a phonebook entry.
3. Press tor l.
• The call is initiated.
The descriptions above are available from the handset. With this model, using the
phonebook is also available from the base station. Refer to chapter 6 “Conventions Used
in this Manual” and chapter 10 “Using your Phonebook” in the User Manual that came
with this phone for details.
Note
Listen to messages recorded on the answering machine
Press eto turn on the answering machine (the information display is turned on). The
outgoing message is played.
Press pto play phone messages (the first recorded message will be played first).
Press cSkip to skip the current message and play the next message.
Press cPrev. to go back to the previous message (if pressed within 1 second of
current message playback).
Press cPrev. to replay current message (if pressed after 1 second of current message
playback).
Press -or +to adjust speaker volume during message playback.
Press xto delete the current message.
Long press xto delete all old messages.
Press eagain to turn off the answering machine (the information display is turned off).
Refer to your SE658 User Manual for details about the answering machine functions.
Welcome to Philips!
Register your product and get support at
www.philips.com/welcome
Need help?
User Manual
Refer to the User Manual that came with your SE658.
Online Help
www.philips.com/support
Troubleshooting
For more information, please refer to the User Manual that came with your phone.
Problem
• There’s no dialling tone!
Solution
• No power: Check the connections.
• Batteries are empty: Charge the batteries.
• Move closer to the base station.
• Wrong line cord used: Use the line cord provided.
• Caller does not hear me
clearly!
• Move closer to the base station.
• Move the base station at least one metre (yard) away
from any electronic appliances.
•Searching... is displayed
on handset and icon is
blinking!
• Move closer to the base station.
• Make sure that your base station is on.
• Reset your unit and restart handset registration.
• Caller number is not
displayed!
• Service is not activated: Check your subscription
with your network operator.
3111 285 47091 (US-EN)
UCZZ69939UZ(0)
©2008 Koninklijke Philips Electronics N.V.
All rights reserved
Reproduction in whole or in part is prohibited without
the written consent of the copyright owner
Inhaltsverzeichnis
Andere Philips Telefon Handbücher
Philips
Philips DCTG272B Bedienungsanleitung
Philips
Philips XL490 Bedienungsanleitung
Philips
Philips TD6822/GH051P Bedienungsanleitung
Philips
Philips DECT6171H/05 Bedienungsanleitung
Philips
Philips TD9473 Bedienungsanleitung
Philips
Philips WelcomeEye Comfort DES9500VDP Bedienungsanleitung
Philips
Philips VOIP8410B/05B Bedienungsanleitung
Philips
Philips SBX8 Bedienungsanleitung
Philips
Philips D121 Bedienerhandbuch
Philips
Philips skip 100 Bedienungsanleitung
Philips
Philips M330 Bedienungsanleitung
Philips
Philips VOIP8411B/05B Bedienungsanleitung
Philips
Philips TD6600 Bedienungsanleitung
Philips
Philips VOIP0801B/DI Bedienungsanleitung
Philips
Philips D215 Produktinformationsblatt
Philips
Philips BaseLine Pro Bedienungsanleitung
Philips
Philips MobileLink S8A Bedienungsanleitung
Philips
Philips E105 Bedienungsanleitung
Philips
Philips SOPHO IPC 100 Bedienungsanleitung
Philips
Philips B141 Bedienungsanleitung
