Philips SLV3110/12 Bedienungsanleitung

master EN Wireless TV Link

www.philips.com/welcome

SLV3110

Table of contents 3

Table of contents

1Important 4

1.1 Power requirements 4

1.2 Conformity 4

1.3 Recycling and disposal 5

1.4 Electric, Magnetic and

Electromagnetic Fields ("EMF") 5

1.5 Installation requirements 6

2 Your Wireless TV link 7

2.1 What’s in the box 7

2.2 Overview of the

Wireless TV link 7

3Gettingstarted 9

3.1 Connect transmitter 9

3.2 Connect receiver 10

3.3 Enjoy 10

3.4 Install the remote control

blaster cord 11

3.5 Remove interference on TV2 11

4 Technical Data 12

5 Frequently asked

questions 13

6INDEX 16

4Important

1Important

Take time to read this user manual before

you use your wireless TV link. It contains

important information and notes

regarding your wireless TV link.

1.1 Power requirements

• Connect the power adapters only to a

100-240V AC 50/60Hz power supply.

• The Electrical network is classified as

hazardous. The only way to power

down the charger is to unplug the

power supply from the electrical

outlet. Ensure that the electrical outlet

is always easily accessible.

Warning

To avoid damage or malfunction:

• Do not expose the wireless TV link to

excessive heat caused by heating

equipment or direct sunlight.

• Do not drop your wireless TV link or

allow objects to fall on your wireless

TV link.

• Do not use any cleaning agents

containing alcohol, ammonia, benzene,

or abrasives as these may harm the set.

• Do not use the product in places

where there are explosive hazards.

• Do not let small metal objects come

into contact with the product. This can

deteriorate audio quality and damage

the product.

• Active mobile phones in the vicinity

may cause interference.

• Do not open your product as you

could be exposed to high voltages.

• Do not allow the charger to come into

contact with liquids.

• Do not allow the TV link to come into

contact with liquids.

• Use only with provided power supply.

Manufacturer: Concord.

Model Name: CM-3AD09005.

• Power supply information for receiver

and transmitter

Input: AC100-240V/120mA,

50Hz/60Hz

Output: DC9V/500mA

About operating and storage

temperatures:

• Operate in a place where temperature

is always between 0 and 40ºC (32 to

103ºF).

• Store in a place where temperature is

always between -10 and 70ºC (14 to

157ºF).

1.2 Conformity

This product has been designed, tested

and manufactured according the

European R&TTE directive 1999/5/EC

Following this directive, this product can

be brought into service in the following

states:

Class identifier. This is a class 1 product.

We, Philips, declare that the product is in

compliance with the essential

requirements and other relevant

provisions of Directive 1999/5/EC. You

can find the Declaration of Conformity

on www.p4c.philips.com.

Important 5

1.3 Recycling and disposal

Disposal instructions for old products.

The WEEE directive (Waste Electrical

and Electronic Equipment; 2002/96/EC)

has been put in place to ensure that

products are recycled using best available

treatment, recovery and recycling

techniques to ensure human health and

high environmental protection.

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

Do not dispose of your old product in

your general household waste bin.

Inform yourself about the local

separate collection system for

electrical and electronic

products marked by this symbol:

Use one of the following disposal options:

1. Dispose of the complete product

(including its cables, plugs and

accessories) in the designated WEEE

collection facilities.

2. If you purchase a replacement

product, hand your complete old

product back to the retailer. He

should accept it as required by the

WEEE directive.

Packaging information:

Philips has marked the packaging with

standard symbols designed to promote

the recycling and appropriate disposal of

your eventual waste.

A financial contribution has been

paid to the associated national

recovery & recycling system.

The labelled packaging material is

recyclable.

1.4 Electric, Magnetic and

Electromagnetic Fields

("EMF")

1. Philips Royal Electronics Manufactures

and sells many consumer oriented

products which usually, as with any

electronic apparatus, have the ability

to emit and receive electro magnetic

signals.

2. One of Philips' leading Business

Principles is to take all necessary

health and safety precautions for our

products, to comply with all applicable

legal requirements and to stay well

within the EMF standards applicable at

the time of producing the products.

3. Philips is committed to develop,

produce and market products that

cause no adverse health effects.

4. Philips confirms that if its products are

handled properly for their intended

use, they are safe to use according to

scientific evidence available today.

5. Philips plays an active role in the

development of international EMF and

safety standards, enabling Philips to

anticipate further developments in

standardisation for early Integration in

its products.

6Important

1.5 Installation requirements

The product transmits and receives radio

waves when it is switched on. The

product complies with the standards that

are defined for it.

As the product is based on RF

technology, the quality of the image can

be influenced by microwave ovens,

Bluetooth, Wifi etc.

Therefore the product can suffer from

the same kinds of interference as GSMs,

portable radios and other RF-based

products.

Your Wireless TV link 7

2 Your Wireless TV link

Congratulations on your purchase and welcome to Philips!

To fully benefit from the support that Philips offers, register your product at

www.philips.com/welcome.

2.1 What’s in the box

2.2 Overview of the Wireless TV link

Control and display elements

1Powerlight:

>green:on

2 On/off switch

3 Power input connector (DC 9V)

4 Remote control blaster cord port

5SCARTcable

6 Wireless channel selection switch

> Find the CHANNEL switch on

4 available channels

A. Transmitter B. Receiver

D. Remote control

blaster cord

E. User manual

C. Power adapter (2x)

Transmitter

8Your Wireless TV link

Control and display elements

7Powerlight:

>green:on

8 On/off switch

9 Power input connector (DC 9V)

10 SCART cable

11 Wireless channel selection switch

> Find the CHANNEL switch on

4 available channels

12Connector

13Blaster light

Receiver

Remote control blaster cord

Getting started 9

3 Getting started

3.1 Connect transmitter

1. Connect the video source to the

transmitter

a. Take the supplied transmitter (A).

Find the SCART cable that is

connecting the video source to the

TV1. Disconnect this SCART cable.

Note: The video source can be a satellite

receiver, a VCR, a DVD player or

recorder...

2. Connect TV1

Plug the SCART cable from TV1 into

the SCART connector of the

transmitter (A).

3. Connect the power adapter

a. Take the supplied power adapter

DC 9V power connector on the

transmitter (A).

b. Plug the adapter into the power

outlet.

c. The green LED on the front panel

should be on.

Note: If it is not the case, press the ON/

OFF switch on the back of the product.

4. Check that TV1 is working well

a. Switch on TV1

b. Check that TV1 is working well.

c. Switch on the connected video

source.

d. Check if TV1 shows the image of

the video source.

> The transmitter is connected

correctly.

5. Connect the remote control blaster

cord (D) to the IR socket.

• Please reference to "3.4 Install the

remote control blaster cord" to

have more information.

10 Getting started

3.2 Connect receiver

Preparation

- Switch on the transmitter (A).

- Switch on the Video source.

- Take these items:

• Receiver (B)

• Power adapter (C)

• Remote control of the video

source

- Go to TV2.

1. Connect the receiver to the second

TV (TV2)

Plug the SCART cable of the receiver

(B) into the SCART port of TV2.

2. Connect the power adapter

a. Take the supplied power adapter

DC 9V power connector on the

Receiver (B).

b. Plug the adapter into the power

outlet.

c. The green LED on the front panel

should be on.

Note: If it is not the case, press the ON/

OFF switch on the back of the product.

3. Set the CHANNEL switch to the same

number that on the transmitter (A).

3.3 Enjoy

All the operations listed on 3.1 and 3.2

should have been done.

1. Switch on TV2.

2. Switch on the receiver (B).

3. Select the correct SCART input on

TV2.

4. Point the remote control of the video

source to the receiver (B).

5. Operate the video source with its

remote control.

6. Check if TV2 shows the image of the

video source.

> The receiver is connected

correctly.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips TV-Zubehör Handbücher

Philips

Philips Wireless TV Link SBC VL1400 Bedienungsanleitung

Philips

Philips Flavors 22FDF6013 Bedienungsanleitung

Philips

Philips Flavors 42FDF6033 Bedienungsanleitung

Philips

Philips SQM6435/27 Bedienungsanleitung

Philips

Philips SQM6415/27 Bedienungsanleitung

Philips

Philips Flavors 42FDF9023 Bedienungsanleitung

Philips

Philips Flavors 42FDF1013 Bedienungsanleitung

Philips

Philips SWV2259W Bedienungsanleitung

Philips

Philips SRU4000/17 Bedienungsanleitung

Philips

Philips 42PFL7403D Montage- und Bedienungsanleitung

Philips

Philips SWV2024 Bedienungsanleitung

Philips

Philips UHP/915B455011 Bedienungsanleitung

Philips

Philips Flavors 22FDF2013 Bedienungsanleitung

Philips

Philips SVC2546W Bedienungsanleitung

Philips

Philips LC7.1E Bedienungsanleitung

Philips

Philips SCANCARD II Bedienungsanleitung

Philips

Philips Flavors 22FDF6033 Bedienungsanleitung

Philips

Philips SVC3222G/10 Bedienungsanleitung

Philips

Philips 22PP1152 Bedienungsanleitung

Philips

Philips Flavors 42FDF1023 Bedienungsanleitung

Philips

Philips Flavors 42FDF2023 Bedienungsanleitung

Philips

Philips Flavors 22FDF2033 Bedienungsanleitung

Philips

Philips 42MF230A Bedienungsanleitung

Philips

Philips SWW1810/27 Bedienungsanleitung

Beliebte TV-Zubehör Handbücher anderer Marken

pass & seymour

pass & seymour GFCI Bedienungsanleitung

Skyvue

Skyvue SECURITY ALARM DEVICE Bedienungsanleitung

Niles

Niles C5-RFWM Bedienungsanleitung

Sony

Sony CRU-52X1 Bedienungsanleitung

Sony

Sony BRAVIA KDL-46Z4100/S Leitfaden

BVE

BVE MATRIX 7xe Bedienungsanleitung

Epson

Epson Moverio BT-100 Bedienungsanleitung

Alcatel

Alcatel onetouch v100 Bedienungsanleitung

Flow

Flow 836 ONT Bedienungsanleitung

AIRIS

AIRIS G819 Bedienungsanleitung

Loewe

Loewe Digital Recorder + Bedienungsanleitung

Sceptre

Sceptre Stello Bedienungsanleitung

Goodmans

Goodmans GD11FVRSD32 Bedienungsanleitung

Serene

Serene TVDirect TV-95 Bedienungsanleitung

TRUlink

TRUlink 89000 Bedienungsanleitung

Panasonic

Panasonic DigiCard Bedienungsanleitung

Alpine communications

Alpine communications Roku Device Bedienungsanleitung

LEGRAND

LEGRAND SANUS BSA-IWP801 Bedienungsanleitung