Philips VR423CAT Gebrauchsanweisung

VR423CAT

VR623CAT

Video Cassette Recorder

Hookup Pages

AUDIO ANT

OUT

VIDEO

OUT IN CH3 CH4

OUT IN

AUDIO ANT

OUT

VIDEO

OUT IN CH3 CH4

OUT IN

6 Hookups without a Cable Box/Direct Broadcast System

The basic VCR/TV connection – antenna/cable to VCR to TV – is shown below. If you have a

Cable Box or a Direct Broadcast System, please see pages eight-nine. If you have a Stereo

TV, please see page 10. After you hook up the VCR, go to page 11 to turn on the VCR.

(The VR623CAT is illustrated here. The VR423CAT has single AUDIO IN/OUT jacks.)

ANTENNA IN

Jack

(on back of

TV)

Cable

(75 ohm)

Back of VCR

Antenna

Indoor/Outdoor

(300 ohm)

Disconnect the antenna or cable from your TV.

Connect the antenna or cable to the ANT(enna) IN Jack of your VCR.

Cable

(75 ohm)

Antenna

Indoor/Outdoor

(300 ohm)

AUDIO ANT

OUT

VIDEO

OUT IN CH3 CH4

OUT IN

AUDIO ANT

OUT

VIDEO

OUT IN CH3 CH4

OUT IN

CH 4

CH 3

CH3 / CH4

Switch

CH3 CH4

AUDIO ANT

OUT

VIDEO

OUT IN CH3 CH4

OUT IN

AUDIO ANT

OUT

VIDEO

OUT IN CH3 CH4

OUT IN

ANT/

CABLE

ANT /

CABLE

supplied black

RF coaxial cable

Connect the supplied black RF coaxial cable to the OUT Jack on the back of

the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on

type (supplied) or screw-on type of coaxial cable, whichever you prefer.)

Set the CH3/CH4 switch on the back of the VCR to CH3 or CH4, whichever

channel is not used or least used in your area. Set the TV to the same channel. For

example, when playing a tape, if the CH3/CH4 switch is set to CH3, the TV should be on

channel 03.

Hookups without a Cable Box/Direct Broadcast System (cont’d) 7

ANTENNA IN Jack

(on back of TV)

example only

Plug in the power cords of the TV and the VCR.

You are ready to turn on the VCR. Please go to page 11 before turning on

the VCR.

8 Hookups with a Cable Box/Direct Broadcast System

There are two ways to connect your Cable Box/DBS to the VCR. With this connection:

●You may view any channel.

●You must select channels at the Cable Box/DBS. You can not change channels at the VCR.

●You may not view a channel other than the one you are recording.

●You may not program channels at the VCR.

●You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/DBS

output channel (channel 03 or 04). Set the CH3/CH4 switch on the back of the VCR to the same channel. Set your

Cable Box/DBS to the channel you want to record. When you enter the channel you want to record in a timer

recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 5 on page 34.) Leave the Cable

Box/DBS on for a timer recording.

AUDIO ANT

OUT

VIDEO

OUT IN CH3 CH4

OUT IN

OUT

ANT /

CABLE

TV’s

ANTENNA

IN Jack

Cable Box/DBS VCR

Recording/Viewing Any Channel

Connections

With the VCR on and in VCR position (the VCR light will appear on the display panel),

set the VCR to the Cable Box/DBS output channel (03 or 04).

Set the TV to the same channel to which you set the VCR. Set the CH3/CH4

switch on the back of the VCR to the same channel.

Select the channel you want to view/record at the Cable Box/DBS.

Connect a Cable signal to the IN Jack on the Cable Box/DBS.

Use the supplied black RF coaxial cable to connect the OUT Jack on the Cable Box/DBS

to the ANT(enna) IN Jack on the VCR.

Use a second RF coaxial cable (not supplied) to connect the OUT Jack on the VCR to

the TV’s ANTENNA IN Jack.

Cable

Signal RF coaxial

cable

RF coaxial

cable

Hookups with a Cable Box/Direct Broadcast System (cont’d) 9

AUDIO ANT

OUT

VIDEO

OUT IN CH3 CH4

OUT IN

IN OUT

ANT /

CABLE

With this connection:

●You may watch one channel while recording another.

●You may not record scrambled channels.

Recording One Channel/Watching Another

Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4

switch. Set the TV to the Cable Box/DBS output channel (03 or 04).

Then, with the VCR in VCR position (the VCR light will appear on the

display panel), use the CH(annel) o/pbuttons to select the

channel you want to record at the VCR. Start the recording.

Press the VCR/TV button once to put the VCR in TV position.

(The VCR light will disappear.)

Select the channel you want to watch at the Cable Box/DBS.

To return to the channel you are recording, set the Cable Box/DBS to

the same channel as the VCR’s CH3/CH4 switch. Press the VCR/TV

button so that the VCR is in VCR position again. The VCR light will

appear on the display panel. The channel you are recording will appear

on the TV screen. Press the STOP/pbutton to stop recording.

TV’s ANTENNA

IN Jack

Cable Box/DBS

VCR

• When you play a tape, make sure

the Cable Box/DBS is set to the

same channel as the CH3/CH4

switch on the VCR. Set the TV to

the Cable Box/DBS output channel

(03 or 04).

Helpful Hint

Connect a Cable signal to the VCR’s ANT(enna) IN Jack.

Use the supplied black RF coaxial cable to connect the OUT Jack on the

VCR to the IN Jack on the Cable Box/DBS.

Use a second RF coaxial cable (not supplied) to connect the OUT Jack

on the Cable Box/DBS to the ANTENNA IN Jack on the TV.

Connections

Cable

Signal

RF coaxial cable RF coaxial cable

10 Hookups with a Stereo TV

●Audio and Video cables are not supplied.

Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.

Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect

the other end of the video cable to the VIDEO IN Jack on your TV.

If you have the VR623CAT, connect a stereo audio cable to the red and white AUDIO OUT

Jacks on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO

IN Jacks on your TV.

If you have the VR423CAT, connect an audio cable to the white AUDIO OUT Jack on the back

of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV. If

your TV has Right and Left AUDIO IN Jacks, you must use a “Y” splitter audio cable as illustrated to deliver

audio to the TV’s right and left channels. This hookup will not give you stereo sound. To get stereo sound, use

the connections on pages six - seven and select the channel to be viewed at the TV (with the VCR turned off).

Turn on your TV, making sure it is in Line Input mode. This might be referred to as the TV’s Audio/Video In

channel or the Auxiliary In channel. Please refer to your TV owner’s manual for details.

AUDIO ANT

OUT

VIDEO

OUT IN CH3 CH4

OUT IN

Video Cable

Stereo Audio Cable

VIDEO (yellow) and

AUDIO (red and white) OUT Jacks Audio and Video IN

Jacks on TV

AUDIO

ANT

OUT

VIDEO

OUT IN

CH3 CH4

Video Cable

“Y” splitter

Audio Cable

VIDEO (yellow) and

AUDIO (white) OUT Jacks Audio and Video

IN Jacks on TV

VR423CAT OR

1antenna or cable to

ANT(enna) IN Jack

VR623CAT

antenna or cable to

ANT(enna) IN Jack

Front Panel 27

POWER Button

Press to turn the VCR power on and off.

PLAY Button

Press to play a tape. Press to release

Slow, Search, or Still mode and return to

playback. Details are on page 41. Press to

select an item in the VCR menu.

REW(ind) Button

When playback is stopped, press to rewind the tape at

high speed. During playback, press to rewind the tape

while the picture stays on the screen. Details are on

page 41. Press to return to a previous VCR menu.

F.FWD (Fast Forward) Button

When playback is stopped, press to fast forward the tape at high

speed. During tape playback, press to fast forward the tape while

the picture stays on the screen. Details are on page 41. Press to

select an item in the VCR menu or to change the setting of a

menu item.

STOP/EJECT

RECORD

MENUSTATUS/EXIT

F.FWD

PAUSE

REW

CHANNEL

VCR/TV

PLAY

VIDEO

VIDEO CASSETTE RECORDER

L AUDIO R

POWER

Remote Sensor

Receives a signal from your

remote control so you can oper-

ate your VCR from a distance.

VIDEO In Jack

Connect a video cable

coming from the video

out jack of a camcorder,

another VCR, or an

audio-visual source (laser

disc player, digital video

disc player, etc.) here.

Details are on page 37.

PAUSE Button

While recording, press to pause the recording.

Press again to resume recording. Details are on

page 30. You can not pause a One-Touch

Recording. During tape playback, press to freeze

the picture. Press again to resume playback.

Details are on page 41.

VCR/TV Button

Press to select VCR or TV position.

●VCR Position

Use to watch a tape, to watch a program

while recording it, or to watch a TV pro-

gram (changing channels at the VCR).

When the VCR light appears on the dis-

play panel, the VCR is in VCR position.

●TV Position

Use to watch TV (changing channels at

the TV) or to watch one program while

recording another. When the VCR light

does not appear on the display panel, the

VCR is in TV position.

RECORD Button

Press once to start a recording. Press

repeatedly to start a One-Touch Recording.

Details are on page 32.

CHANNEL (p/o) Buttons

Press to change channels at the VCR.

Or, press to adjust the tracking of a

tape during normal playback or slow

motion playback. Also, press to remove

vertical jitter in a Still picture.

STOP/EJECT Button

Press once to stop the tape. When playback

is stopped, press to eject the tape. Press to

select an item in the VCR menu.

AUDIO In Jacks

Connect audio cables com-

ing from the audio out jacks

of a camcorder, another

VCR, or an audio source

here. Details are on page 37.

The VR623CAT is shown here.

The VR423CAT has only one

AUDIO In jack.

VR623CAT

MENU Button

Press to access the VCR menu.

STATUS/EXIT Button

Press to access or remove the on-screen status display.

Details are on page 25. Press to exit on-screen menus.

AUDIO ANT

OUT

VIDEO

OUT IN CH3 CH4

OUT IN

28 Rear Panel

AUDIO IN Jack(s)

Connect audio cables coming from the AUDIO OUT Jacks of a camcorder, anoth-

er VCR, or an audio source here. Details are on page 37. If you connect other equip-

ment to the AUDIO and VIDEO IN jacks on the back of the VCR, select channel 001

(AV REAR) at the VCR. This allows you to view or hear the materials playing on the

other equipment.

The VR623CAT is shown here. The VR423CAT has only one AUDIO IN jack.

VIDEO IN Jack

Connect a video cable coming from the

VIDEO OUT Jack of a camcorder,

another VCR, or an audio-visual source

(laser disc player, digital video disc play-

er, etc.) here. Details are on page 37.

If you connect other equipment to the

AUDIO and VIDEO IN jacks on the

back of the VCR, select channel 001 (AV

REAR) at the VCR. This allows you to

view or hear the materials playing on

the other equipment.

ANT(enna) IN Jack

Connect your antenna or cable

here. Details are on pages six-10.

CH3/CH4 Switch

Set to channel 3 or 4

to use your TV with

your VCR. Details are

on pages six-nine.

OUT Jack

Use the supplied black RF

coaxial cable to connect

this jack to the ANTEN-

NA IN Jack on your TV,

Cable Box, or Direct

Broadcast System. Details

are on pages six-nine.

VIDEO OUT Jack

Connect a video cable going to the VIDEO

IN Jack of a camcorder, another VCR, or

an audio-visual system (monitor, laser disc

player, video disc player, etc.) here. Details

are on pages 37 and 43.

AC Power Cord

Connect to a standard

AC outlet to supply

power to the VCR.

AUDIO OUT Jack(s)

Connect audio cables going to the AUDIO IN Jacks of a camcorder, another

VCR, or an audio system here. Details are on pages 37 and 43.

The VR623CAT is shown here. The VR423CAT has only one AUDIO OUT jack.

Make the connections shown above.

Rerecording (Tape Duplication) 37

VCR 2 will record your tape. Insert a blank tape in VCR 2.

The VCR must be in VCR position. (The VCR light will appear on

the display panel. If it does not, press the VCR/TV button once.)

Turn on the TV and set it to channel 03 or 04, whichever

channel the CH3/CH4 switch on VCR 2 is set to.

Point the remote control at VCR 2. Press the VCR but-

ton, then press Number buttons 0, 0, 1 or 0, 0, 2. (See

Helpful Hints at right.)

Press the SPEED button to select SP or SLP at VCR 2.

Press the PLAY button on VCR 1 and the RECORD but-

ton on VCR 2 at the same time.

To stop recording, press the STOP/EJECT button on VCR 1, then

press the STOP/EJECT button on VCR 2.

VCR 1 will play your tape. Put a prerecorded tape in VCR 1.

• If you use the AUDIO and VIDEO IN

Jacks on the back of VCR 2, press

Number buttons 0, 0, 1. AV REAR

will appear on the TV screen. (BLUE

BACKGROUND should be ON.

Details are on page 46.)

• If you use the AUDIO and VIDEO In

Jacks on the front of VCR 2, press

Number buttons 0, 0, 2. AV FRONT

will appear on the TV screen. (BLUE

BACKGROUND should be ON.

Details are on page 46.)

• Unauthorized recording of copyright-

ed television programs, video tapes,

or other materials may infringe on

the rights of copyright owners and

violate copyright laws.

• If a program has copyright protection,

it may not record clearly.

• The VCR in the figure above is the

VR623CAT. If you have the

VR423CAT, use a single-plug audio

cable to connect the AUDIO OUT

jack on VCR 1 to the AUDIO IN jack

on VCR 2.

Helpful Hints

●Audio and Video cables are not supplied.

AUDIO ANT

OUT

VIDEO

OUT IN CH3 CH4

OUT IN

AUDIO ANT

OUT

VIDEO

OUT IN CH3 CH4

OUT IN

VCR 1

Playing VCR VCR 2 - Recording VCR

1. Audio cables from AUDIO OUT Jacks

of VCR 1 to AUDIO IN Jacks of VCR 2

2. Video cable from VIDEO OUT Jack

of VCR 1 to VIDEO IN Jack of VCR 2

3. RF coaxial cable

from the OUT jack of

VCR 2 to the TV’s

ANTENNA IN Jack

The instructions on this page show you how to copy tapes. The illustration uses two VR623CAT VCRs. Different

VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1-7.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Videorecorder-System Handbücher

Philips

Philips VR242/03 Bedienungsanleitung

Philips

Philips VR 708A/07 Bedienungsanleitung

Philips

Philips VRZ241AT Bedienungsanleitung

Philips

Philips VRZ222AT Bedienungsanleitung

Philips

Philips VR1010BP Bedienungsanleitung

Philips

Philips VRB615AT Bedienungsanleitung

Philips

Philips VR702 Bedienungsanleitung

Philips

Philips SV2000 SVA102 Bedienungsanleitung

Philips

Philips VR588/50 Bedienungsanleitung

Philips

Philips VR 210/75 Bedienungsanleitung

Philips

Philips 4-HEAD VIDEO CASSETTE RECORDER VR420CAT - Hook Up... Bedienungsanleitung

Philips

Philips Show View VR1600 Bedienungsanleitung

Philips

Philips MVR440MG Bedienungsanleitung

Philips

Philips VR622CAT Bedienungsanleitung

Philips

Philips VRX262AT Bedienungsanleitung

Philips

Philips VR910/07 Bedienungsanleitung

Philips

Philips VR200/02 Bedienungsanleitung

Philips

Philips VR 948/13M Bedienungsanleitung

Philips

Philips turbo drive VR550 Bedienungsanleitung

Philips

Philips VR556/50 Bedienungsanleitung

Philips

Philips VR 666/16 Bedienungsanleitung

Philips

Philips VRA231AT Bedienungsanleitung

Philips

Philips VRX342AT Bedienungsanleitung

Philips

Philips VR102 Bedienungsanleitung

Beliebte Videorecorder-System Handbücher anderer Marken

Toshiba

Toshiba M-662 Bedienungsanleitung

Sony

Sony GV-500 Primary Bedienungsanleitung

JVC

JVC HR-J282EU Bedienungsanleitung

Sony

Sony HDCAM-SR SRW5800 Bedienungsanleitung

Magnavox

Magnavox VRU242AT Bedienungsanleitung

Sony

Sony HVR-M10C Bedienungsanleitung

RCA

RCA VR634HF - Hi-Fi VCR Bedienungsanleitung

JVC

JVC HR-5910U Bedienungsanleitung

Panasonic

Panasonic ProLine AG-1320 Bedienungsanleitung

JVC

JVC HR-S8600EU Bedienungsanleitung

JVC

JVC HR-FS1U Bedienungsanleitung

Sharp

Sharp VC-H9888U Bedienungsanleitung

FUNAI

FUNAI LC-950 Bedienungsanleitung

Sharp

Sharp VC-S2000GM Bedienungsanleitung

Sony

Sony Video8 EV-A60 Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-V4523S Bedienungsanleitung

Aiwa

Aiwa HV-E212 Bedienungsanleitung

JVC

JVC HR-J3006UM Bedienungsanleitung