Phoenix Geophysics RXU-8A Bedienungsanleitung
RXU-8A Quick
Start Guide
2. RXU-8A (components)
3. Product description
4. Creating a Configuration File
5. Configuration Creator - CSAMT acquisition
6. Configuration Creator - MT acquisition
7. Electric Channel Settings - MT acquisition
8. Magnetic Channel Settings
9. Using Remote Control Client
10. Saving a Configuration File
11. RXU-8A Connections
12. SD Card - Recording Data
13. Stopping a recording
14. Quick Field Data Evaluation
15. Evaluate
16. Process Data
17. Viewing Recording Details
18. Technical Support
1
Version: 200914 ID: DAA21
Components
1Power/Record button and indicator
2Display
3
E1 (Ex) electrode connectors
E2 (Ey) electrode connectors
E3 electrode connectors
E4 electrode connectors
E5 electrode connectors
4Ground electrode connector
512VDC power input
6LAN connector
7GPS antenna connector
8
H1 (Hx) magnetic sensor connector
H2 (Hy) magnetic sensor connector
H3 (Hz) magnetic sensor connector
9SD card button and indicator
10 SD card slot and cover
132
4
5
6
7
8
9
10
2
RXU-8A
Designed with flexibility in mind, the RXU-8A
can be used as a regular MT receiver, where
the extra electric channels can be used to
acquire a redundant recording on the same site
or to acquire an adjacent site.
Excellent choice for controlled source
acquisitions that require a large density of
electric channels. The RXU-8A can also work
for special applications where extra electric
inputs might be needed.
3
Open EMpower and click the Prepare button
1. Select the Receiver Type
2. Recording
2.1. MT - Configuration Creator
2.2. CSAMT - Configuration Creator
(see next page)
3. Calibration
3.1. Sensor Calibration
3.2. Receiver Calibration
*No additional configuration needed
4. System tests
4.1. White Noise
4.2. Parallel Noise - Configuration Creator
4.3. Self Test
*No additional configuration needed
Creating a Configuration File
243
4.1
4.2
4.3
3.1
3.2
2.1
1
4.1
3.1
3.2 4.3
2.2
4
Configuration Creator - CSAMT acquisition
1. Select the CSAMT recording type
2. CSAMT Setup Wizard
○ Type the Project name
○ Select the Local power line frequency
○ Choose the Local time zone and click Next
3. Frequency Schedule
○ Define the lowest and highest frequency
○ Select the Frequency per octave and click Next
4. Transmitter Setup
○ Select the Transmitter (Tx) type
○Type the sensor/ Tx serial and click Next
5. Starting Coordinates
○ Enter the base coordinates of the grid (latitude and
longitude)
○ The Station Separation within a same line
○ Separation between lines
○ The Line orientation
6. Click Accept
1
2
3
4
5
65
1. Check that the Receiver type is
RXU-8A
2. Select the Schedule
2.1. Manual or Automatic Start
2.2. Or for a specific schedule use,
Single Shot, Daily or Weekly
and click Add Schedule to
define the time and date
3. Ethernet port (see the Networking
Settings manual)
4. Channels Settings
(see pages 7-8)
5. Define the Sampling Mode
and/or Sampling Rate
6. Configuration Layout
Configuration Creator - MT acquisition
6
Additional information
4
2
2.2
This section is used for inputting the
parameters and instrument details that will
be used for the recording
2.1
5
1
3
6
Electric Channel Settings - MT acquisition
1. Select the Electric channel
2. Enable or Disable the channel(s)
○Disable the channel(s) If you do not plan to use
them during the recording (This will save space on
the SD card)
3. Complete the information in the Electric
channel settings
2
Some channel settings
can be configured by
using the right-click menu
7
1
2
3
Magnetic Channel Settings
1. Select the Magnetic channel
2. Enable or Disable the channel(s)
○Disable the channel(s) if you do not plan to use
them during the recording (This will save space on
the SD card)
3. Fill in the required information on the Magnetic
channel settings
2Channel settings can be configured by using the right-click
menu or by using the Magnetic channel settings section
Some channel settings
can be configured by
using the right-click
menu
8
1
3
2
Using Remote Control Client
9
1. Use Remote Control Client from Tools menu
2. Provide a valid hostname, username and
password
3. Then click on Connect button to establish a
connection
4. Choose Receiver Type
5. Enter the instrument ID
6. Configure Electric and Magnetic channels as
needed
7. Click on the Send Configuration button
2
3
45
Receiver with firmware newer than
v1.54.1 will ignore the configuration
about the Attenuator
7
6
1
Note :
Once the receiver has received the new configuration and
started the new recording, screen will be inactive for at
least 3 minutes.
Saving a Configuration File
1. Insert the SD Card
○ The computer must be
equipped with an SD card slot
or use a USB card reader
2. Click the File menu
○Save or Ctrl+S
○Select the SD card
○EMpower will automatically create
the file “config.json”
3. Save the configuration file
(config.json) in the root folder of the
SD card
4. Open the file explorer
○ Right click SD card drive
○Select Eject option
○Pull out the SD Card
2
3
1
4
10
Andere Handbücher für RXU-8A
1
Inhaltsverzeichnis
Andere Phoenix Geophysics Datenlogger Handbücher
