Phoenix Mecano Dewert Okin HE200 Bedienungsanleitung

CONTROL UNIT HE200

Installation Instructions

(Translation of the original installation instructions)

CONTROL UNIT HE200 Foreword

82687(-) 3

Foreword

Disclaimer and exclusion of liability

DewertOkin is not responsible for damage resulting from:

•failure to observe these instructions,

•changes made to this product which have not been approved by DewertOkin, or

•the use of replacement parts which have not been approved or manufactured by DewertOkin.

We reserve the right to make unannounced technical changes in the course of our continual

product improvement process!

Creation of a complete operating instruction manual for the entire end product

These instructions are only intended to be used by the end-product manufacturer. They should not

be given to the operator of the end product. The factual information contained within may be used

as a basis when creating the end-product manual.

The warning and danger notices are best suited for use in the end product's manual. However it is

not sufficient to simply follow these notices. You should also carry out an internal risk assessment

for your end product. This can then be used as the basis for the safety notices in your manual.

These installation instructions do not contain all information required to safely operate the end

product. They only describe the installation and operation of the product as partially completed ma-

chinery.

The instructions are intended for the technicians responsible for manufacturing an end product and

not for the operators of the end product.

Table of contents CONTROL UNIT HE200

4 82687(-)

Table of contents

Foreword 3

Disclaimer and exclusion of liability 3

Creation of a complete operating instruction manual for the entire end product 3

Table of contents 4

1. General Information 5

1.1 About these installation instructions 5

1.2 Conventions used 5

2. Safety notices 6

2.1 Proper and intended usage 6

2.2 Selection and qualification of personnel 7

2.3 Ratings plate 8

3. Possible combinations 9

4. Description 10

4.1 Components 10

5. Technical specifications 11

6. Installation 13

6.1 Safety notices to observe during installation 13

6.2 Installation procedure 13

7. Information about creating your Operating Manual 16

7.1 General information 16

8. Troubleshooting 18

9. Maintenance 19

9.1 Cleaning and care 19

10. Disposal 20

10.1 Packaging material 20

10.2 Components in the control unit 20

EU Declaration of Conformity 21

CONTROL UNIT HE200 General Information

82687(-) 5

1. General Information

1.1 About these installation instructions

In order to install the CONTROL UNIT HE200 successfully and safely in the end product, these in-

stallation instructions must be observed. These instructions are not an operating manual for the

end product.

These instructions will help you to minimize danger, repair costs and down times. They will also

help you to increase the reliability and lifespan of the device.

CAUTION

The notices in these instructions must be followed! Following the guidelines during installation

and connection procedures will help to minimize:

•the risk of accident and injury, and

•damage to the CONTROL UNIT HE200 or the end product.

These installation instructions have been written with due care and attention. However, we cannot

guarantee that the data, images and drawings are complete and correct nor do we accept any li-

ability for the information contained therein, unless required by law.

1.2 Conventions used

Notices which do not relate to safety are indicated in these instructions with a symbol:

Triangular notice symbol

Explanations of warning notices

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moder-

ate injury.

NOTICE

NOTICE is used to address practices which are not related to personal injury but may result in

damage to the product or surroundings.

Safety notices CONTROL UNIT HE200

6 82687(-)

2. Safety notices

2.1 Proper and intended usage

The CONTROL UNIT HE200 is intended for use:

•as a control unit for suitable DewertOkin drive systems,

•for HOME applications (in beds, reclining chairs, etc.),

CAUTION

Risk of accident

This CONTROL UNIT HE200 should only be used for the applications described above. Any

other use is forbidden. Improper usage can lead to accidents or destruction of the unit. Such

non-approved applications will lead immediately to the expiration of all guarantee and warranty

claims on the part of the end-product manufacturer against the manufacturer.

2.1.1 Improper usage

Be sure to follow the notices below concerning improper usage. You should include them in your

product manual in order to inform the users of your end product.

The CONTROL UNIT HE200 should not be used:

•in any environment where combustible or explosive gases or vapours (e.g., anaesthesiology)

may be present,

•in the proximity of open fires or other heat sources (such as furnaces, ovens or direct sunlight),

•as a power source for toys or games,

•in any application that will be cleaned with an automated washing system,

•in a moist environment, or

•outdoors.

The CONTROL UNIT HE200 can be used by children of 8 years and older, persons with reduced

physical, sensory or mental capabilities, or persons with lack of experience or knowledge when

they are supervised or instructed concerning the safe use of the device and when they understand

the resulting risks. Do not allow children to play with this device. The cleaning and user mainte-

nance must not be carried out by children without supervision.

You should only use spare parts which have been manufactured or approved by DewertOkin.

Only these parts will guarantee a sufficient level of safety.

CONTROL UNIT HE200 Safety notices

82687(-) 7

2.2 Selection and qualification of personnel

The installation of the CONTROL UNIT HE200 in the end product may only be performed by quali-

fied personnel.

2.2.1 Electrical safety

CAUTION

Electric shock

Be careful; there is a risk of electrical shock! Before installing, make sure that you disconnect the

external DewertOkin power supply for the CONTROL UNIT HE200 from the power outlet!

The CONTROL UNIT HE200 should not be used: You must properly dispose of malfunctioning or

broken units.

Safety notices CONTROL UNIT HE200

8 82687(-)

2.3 Ratings plate

The ratings plate shown is an example; The specifications for your CONTROL UNIT HE200

may differ from this illustration.

Figure 1 Ratings plate for the CONTROL UNIT HE200 (example)

HE200 Model name

xxxxx Article number

29V Input voltage

6.00A Permitted power consumption

Intermittent Operation 2min/18min Mode of operation

Prod.date Calendar week / year

Serial No. CONTROL UNIT HE200 serial number

VRx Software version

IP20 Protection degree

Use in dry rooms only!

Conformity mark

Follow all special disposal instructions!

CONTROL UNIT HE200 Possible combinations

82687(-) 9

3. Possible combinations

The CONTROL UNIT HE200 can be used together with multiple individual drives, massage motors

and accessories that have been approved by DewertOkin.

A tailored system consists of the combination of control unit, single drive, massage motor, accesso-

ries, and hand-held remote.

DewertOkin has separate system instruction manuals containing the additional information and in-

structions needed for these systems.

Detailed information on combination possibilities can be requested directly from DewertOkin.

Description CONTROL UNIT HE200

10 82687(-)

4. Description

The CONTROL UNIT HE200 is a control unit and for one or more DewertOkin massage motors. An

external DewertOkin power supply unit is used to connect the CONTROL UNIT HE200 to the

mains power. The CONTROL UNIT HE200 is equipped with built-in radio receiver.

4.1 Components

The housing of the CONTROL UNIT 258-4 has a connection for an external DewertOkin drive

system, as well as connections for massage motors and various accessories.

Figure 2 Control Unit HE200

A Multi-function port for optional accessories

B Power LED

C Control Unit HE200 D Port for massage motor at head side

E Port for massage motor at foot side F Pairing LED

G Reset button / Pairing button

H Connection for the external drive system

Inhaltsverzeichnis

Andere Phoenix Mecano Steuereinheit Handbücher

Phoenix Mecano

Phoenix Mecano DewertOkin MC10 Bedienungsanleitung

Phoenix Mecano

Phoenix Mecano DewertOkin CU155 Bedienungsanleitung

Phoenix Mecano

Phoenix Mecano Dewert Okin ACCUCONTROL 4.5 Bedienungsanleitung

Phoenix Mecano

Phoenix Mecano DEWERT OKIN IPROXX 2 Benutzerhandbuch

Phoenix Mecano

Phoenix Mecano DewertOkin MC11 Bedienungsanleitung

Phoenix Mecano

Phoenix Mecano Dewert Okin CU458-2 Bedienungsanleitung

Phoenix Mecano

Phoenix Mecano Dewert Okin HE-300 SMPS Bedienungsanleitung

Phoenix Mecano

Phoenix Mecano Okin Refined CB3432 Bedienungsanleitung

Phoenix Mecano

Phoenix Mecano Dewert Okin SG 300 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung