Phoenix PALLADIUM LS8000 Series Bedienungsanleitung

PLD7000

9000BL

INSTRUCTION

LS8000 SERIES

Data media such as CDs or Diskettes are to be stored in data safes.

High value items such as cash or jewelries must be stored in certified

security safes.

Followings are the safety instructions & rules. Prior to using the safe,

please read the instructions carefully.

Cautions when placing the safe.

To avoid dampness, place the safe on a well ventilated and flat floor.

The safe is so heavy that it is to be handled very carefully.

Never move the safe in door open.

Be cautious not to be bumped against corners of safe.

Cautions when using the safe.

Be careful not to close the door roughly.

As a safe is heavy and operated with a smart digital lock, we

recommend children not to touch it.

The articles must be apart from door inside panel.

Overload articles may cause some troubles when closing and opening.

Be careful not to forget the user code, and keep the instruction

outside of the safe.

Be careful not to hurt hands or fingers when closing door.

Heavy articles are recommended to be laid on the bottom.

This fire safe is for storing paper documents, not for data media.

In case of high dampness inside the safe, the articles may go moldy

so that the desiccant must be replaced periodically.

FOR SAFETY

Components

Instruction

1.5V Alkaline

AA Batteries

8pcs

PLD7000BL : 2pcs / 8pcs

PLD9000BL : 3pcs / 12pcs

9V Battery

for Alarm

(Optional)

Shelf Shelf Clips

Alarm

(Optional)

Nomenclature

Overview

Push right side of door frame

to expose battery case.

InteriorFront

Touch Panel

Door back

Battery Case

Touch Pad

FND

Battery

AS Alert

When AS Icon appears,

please contact to AS Center.

Finger-print

sensor

Battery Case

Memory

Button

Optional

Alarm

LED Light

Push

2) Pull out Battery Case

forward.

1 ) Push the front of

the battery case.

Prior to using safe,

1) Push the front of the battery case to expose battery case.

2) Load batteries.

3) Replace eight batteries

at same time.

Batteries

When Battery Change Icon or Battery Change Message LobAtt appears, the locking system

* NOTE : If a wrong code entered, “bi-ric” sound and ErrOr on FND.

* Paralysis : If wrong codes entered 5 times, the lock gets paralyzed 5 minutes.

1) No response against pad touch.

Paralysis Rest Time is indicated on FND as Min-Sec.

In case of paralysis rest time 4 minutes and 29 seconds, 4_29 indicated on FND.

3) After 5 minutes, paralysis gets released.

* Scramble Numbers :

When opening a safe, scramble numbers can be put

before and/or after the real code to avoid peeps. User code should be

touched consecutively.

32 numbers are acceptable including the real code.

(Ex) In case of user code ‘ 1 2 3 4 ’, touch ‘ xxx1234 ’, ‘ 1234xxx ’ or ‘ xxx1234xxx ’.

1) Touch Pad 2) Touch User Code 3) Touch

4) Open the door

(Factory Code 1 2 3 4)(OPEnd on FND)

2. Open with Code

may not work normally. A set of 8 alkaline batteries should be replaced together with the new one.

Even though batteries completely exhausted, the registered codes are not erased.

Touch Pad

PUSH PULL Replace Batteries

User Code Open the Door

* 32 finger-prints are acceptable.

* NOTE : 1) Prior to closing the door, please confirm with 5. Open with Finger-print if the finger-print

correctly registered.

2) Worn-out finger-print can’t be entered.

* NOTE : 1) Prior to closing the door, please confirm with 2. Open with Code

if the New Code registered correctly.

2) It is not recommended to enter the specific user code such as telephone number,

birthday, consecutive number, and etc. for security reasons.

2) Enter New Code

(4 ~16 digits)

3. Set User Code

Keep door open.

Press

Button on door back.

4. Register Finger-prints

Please put user’s finger

on sensor while

blue lamp flickering,

3) Touch

5) Touch

4) Touch User Code

6) Put Finger-print three times on sensor.

(Blue light flickers)(1st , 2nd , good on FND)

3) Touch

( good on FND)

2) Touch 3

Press

Button on

door back.

User Code

Finger

print 3 times

M 3

New Code

Close the door. Door locks automatically.

If door is unlocked when closed the door, Error sign on FND

and sounding “Bi Bi Bi Bi”.

1) Touch Pad 2) Put Finger-print on

sensor

Open the door

(OPEnd on FND)

* Paralysis : If unregistered finger-prints entered 5 times, the lock gets paralyzed 5 minutes.

1) No response against pad touch.

Paralysis Rest Time is indicated on FND as Min-Sec.

In case of paralysis rest time 4 minutes and 29 seconds, 4_29 indicated on FND.

3) After 5 minutes, paralysis gets released.

* NOTE : If a unregistered finger-print entered, “bi-bi-bi” sound and ErrOr on FND.

(

CLOSEd on FND)

If one finger-print is removed, all the registered finger-prints are erased simultaneously.

Press

Button on door back.

4) Touch

3) Touch

(CLEAr on FND)

2) Touch

5. Open with Finger-print

Locking

* If door opening state keeps over 90 seconds, the alarm sounds.

6. Delete Finger-prints

Keep door open.

Finger

print Finger

printTouch Pad

##M 3

Close the Door

ㆍTwo users can independently open safe with each other’s own user code.

* Multi mode and dual mode can not be used simultaneously.

1) Touch Pad 2) Touch 1st Code

or 2nd Code

3) Touch

4) Open the door

(OPEnd on FND)

* NOTE : If multi mode unsets, 2nd code is removed automatically. 1st code cannot be removed.

* NOTE : 1) 2nd user code must be different from 1st code.

Prior to closing door, confirm as shown in 8. Multi mode

▶

Open if 2nd Code registered correctly.

3) 2nd code can be changed in the same way as 8. Multi mode

▶

Set .

4) For setting or changing 1st code, please do as shown in 3. Set User Code .

(4 ~16 digits)

Press

Button on

door back.

5) Touch

2) Touch

3) Touch

4) Enter

2nd Code

(good on FND)

Press

Button on

door back.

4) Touch

3) Touch

2) Touch

(CLEAr on FND)

8. Multi mode

Set

Unset

Open

2nd Code

# #M 2

1st

Code

Touch Pad Open the Door

ㆍCode and finger-print should be entered in a row for opening.

* Dual mode and multi mode can not be used simultaneously.

* NOTE : 1)

Prior to closing door, confirm as shown in 9. Dual mode(Finger-print+Code)

▶

Open if Finger-print registered correctly.

Finger-print can be changed in the same way as 9. Dual mode(Finger-print+Code)

▶

Set .

For setting or changing user code, please do as shown in 3. Set User Code .

5) Open the door

1) Touch Pad 2)

Put Finger-print

on sensor

Touch

User Code

4) Touch

(OPEnd on FND)

Press

Button on

door back.

4) Touch

3) Touch

2) Touch

(CLEAr on FND)

Press

Button on

door back.

2) Touch

3) Touch

If there is no registered fingerprint

Put Finger-print three times on sensor.

(good on FND)

(dUAL on FND)

9. Dual mode (Finger-print + Code)

Set

Unset

Open

Finger

print 3 times

#M 5

# #M 5

Finger

print User Code

Touch Pad

Open the Door

* NOTE : If dual mode unsets, 2nd code is removed automatically. 1st code cannot be removed.

* NOTE : 1) 2nd code must be different from 1st code.

Prior to closing door, confirm as shown in 10. Dual mode(Code+Code)

▶

Open if 2nd Code registered correctly.

3) 2nd code can be changed in the same way as

10. Dual mode(Code+Code)

▶

Set .

4) For setting or changing 1st code, please do as shown in 3. Set User Code .

1) Touch Pad 2) Touch

1st Code

6) Open the door

4) Touch

2nd Code

5) Touch

3) Touch

(OPEnd on FND)

Press

Button on

door back.

4) Touch

3) Touch

2) Touch

(CLEAr on FND)

(4 ~16 digits)

Press

Button on

door back.

5) Touch

2) Touch

3) Touch

4) Enter

2nd Code

(good on FND)

(dUAL on FND)

10. Dual mode (Code + Code)

ㆍTwo different codes should be entered in a row for opening.

* Dual mode and multi mode can not be used simultaneously.

* While using Dual locking function (Code + Code), finger-print function doesn’t work.

Set

Unset

Open

2nd

Code

# #M 9

1st

Code

2nd

Code

Touch Pad Open

Alarm is automatically released when door is opened.

Optional Alarm

Curfew Mode

Press

BUTTON

(On / Off )

(LED turns on/off, 10 seconds required)

Battery life span : 1year (in alarm setting)

In following cases, 9V battery must be replaced.

- If alarm horns more than 30 minutes

- When LED light is not bright enough

Set/Unset

Installing

Place alarm loaded with 9V battery on doorback.

3) Touch

Press

Button

on door back.

2) Touch

(Alerton FND)

Press

Button

on door back.

4) Touch

3) Touch

(CLEAr on FND)

2) Touch

Button

Battery Housing Cover

LED Light

Push down to open.

ㆍOnce alarm system is affected by shock or tilt, it makes horn immediately.

ㆍWhen Alarm system is set on, some impacts to the safe may cause alarm horning.

ㆍMotion sensor may respond to all kinds of movements.

11. Alarm Setting

Set

Unset

#M 8

# #M 8

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Phoenix Sicher Handbücher

Phoenix

Phoenix SS0935E Series Bedienungsanleitung

Phoenix

Phoenix Diamond Deposit HS1090ED Bedienungsanleitung

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Phoenix

Phoenix FS1610K Produktinformationsblatt

Phoenix

Phoenix PS600 Bedienungsanleitung

Phoenix

Phoenix DS2500K Bedienungsanleitung

Phoenix

Phoenix FS1280F Bedienungsanleitung

Phoenix

Phoenix VENUS HS0650 Produktinformationsblatt

Phoenix

Phoenix DS2500E Bedienungsanleitung

Phoenix

Phoenix SS1180K Bedienungsanleitung

Phoenix

Phoenix CITADEL SS1190 Produktinformationsblatt

Phoenix

Phoenix FS0440F Produktinformationsblatt

Phoenix

Phoenix SS0800K Produktinformationsblatt

Phoenix

Phoenix VENUS HS0656 Produktinformationsblatt

Phoenix

Phoenix SS0992E Bedienungsanleitung

Phoenix

Phoenix SS0800E Series Bedienungsanleitung

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Phoenix

Phoenix DS2500K Produktinformationsblatt

Phoenix

Phoenix SS0935E Series Bedienungsanleitung

Phoenix

Phoenix FS0352C Produktinformationsblatt

Phoenix

Phoenix FS2250K Series Bedienungsanleitung

Phoenix

Phoenix SS1190K Installations- und Benutzerhandbuch

Phoenix

Phoenix FIRE COMMANDER PRO FS1920 Produktinformationsblatt

Phoenix

Phoenix FS1270E Series Bedienungsanleitung

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

Honeywell

Honeywell 5912 Bedienungsanleitung

Technomax

Technomax Trony Series Handbuch

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung

Ankaro

Ankaro ANK EZ I Bedienungsanleitung

Intratone

Intratone KEY SAFE Leitfaden

Costway

Costway HW50956 Bedienungsanleitung

Megasat

Megasat K Series Bedienungsanleitung

ECOSAFE

ECOSAFE 3030ARD Bedienungsanleitung