Phoenix SS0935E Series Bedienungsanleitung

PHOENIX SS0935E SERIES

USER INSTRUCTIONS

WITH YOUR SAFE

You will find in the transit packaging box

• Two emergency keys

• Two bolts

• One allen key

• One instruction card for hotel room applications

SETTING YOUR PERSONAL CODE

1. Enter the factory default code 1 2 3 4 the LCD display will

indicate “OPENED”

2. With the door in the open position enter the 4 digit number you

have selected as your personal code and press the # key. The

bolts will slide out and the lcd display will show “CLOSED” to

confirm that the new code has been accepted.

3. Enter the new code again, the bolts will retract and the door

can then be closed.

4. To lock the safe, enter again the new code and press the # key.

The LCD display will confirm CLOSED” and the safe is locked.

NOTE: IF AN INCORRECT CODE IS ENTERED 4 TIMES THE KEYPAD WILL

HIBERNATE FOR 15 MINUTES .

CHANGING THE EMERGENCY CODE

With the door in the open position.

1. Turn off for 5 seconds, the red power switch located on the back edge

of the door

2. Turn power back on. The LCD display will indicate “SECURE” then “GOOD”

3. When the display has cleared press the * key twice, “PRPG” will appear in

the display

4. Enter the default factory code 011223 the display will indicate “NEW”

5. Enter a new six digit code followed by the # key the display will indicate

“AGAIN”

6. Re-enter the code again followed by the # key, the new code will be

confirmed with “DONE” indicated in the display.

CREDIT CARD FACILITY

If you lock your safe with a credit card you cannot open the safe with a

personal code. But the emergency override code will always open your safe.

If you lock your safe with your personal code, you cannot open the safe with

the credit card. But the emergency override code will always open your safe.

SYSTEM CODES

SS0935E safes have three operating systems

• A personal 4 digit code

• An emergency code ***

• A credit card facility code

THE EMERGENCY CODE FOR THESE SAFES ARE SET TO 6 DIGITS AND

*** WE STRONGLY RECOMMEND THAT YOU CHANGE BOTH THE PERSONAL

AND EMERGENCY CODES FROM THE FACTORY SETTING ***.

HOW TO PROGRAM A CREDIT CARD

1. For the first time of use, enter either the factory default code 1 2 3 4 or a

previously selected personal code. The display will indicate “OPENED”

and the door can be opened.

2. With door in the open position and unlocked, slide the card through the

card reader slot, from right to left with the magnetic strip facing down.

3. The LCD display will indicate “CLOSED” and the bolts will be extended.

The magnetic card has now been accepted. The previously entered digital

code is now inoperative.

4. Slide the card again through card slot, the display will indicate “OPENED”

the bolts will retract and the door can be closed.

5. To lock the safe, slide the magnetic card through the card slot. The display

will indicate “CLOSED” and the safe is locked.

6. To unlock the safe, slide the card again through card slot, the display will

indicate “OPENED” the bolts will retract and the door can be opened.

7. To change back to personal code operation, with the door and lock in the

open position, enter the personal code followed by the # key. The display

will indicate “CLOSED” and the lock will have reverted to keypad operation.

1 2 3

4 5 6

7 8 9

*0 #

1 2 3

4 5 6

7 8 9

0 #

Safe

Control Panel

Door

Keypad

Phoenix Brass

nameplate

Display

Keypad

Card Slot

Card swip direction indicator

Key (lock)

# Key (clear)

PHOENIX SS0935E SERIES

USER INSTRUCTIONS

EMERGENCY KEYS

In the event of lost codes or battery failure, the override key can be used to

open the safe. The mechanical override lock is located under the brass

Phoenix nameplate.

1. Unscrew the two screws using the allen key holding the brass Phoenix

name plate in position and remove the plate.

2. Insert the override key and turn clockwise, the bolts will be withdrawn

and the door will open.

3. Replace the brass name plate.

4. Repeat the above procedure to set new codes or card application or

replace batteries.

NEVER PUT THE EMERGENCY KEYS INSIDE YOUR SAFE

TO REPLACE THE BATTERIES

Open the safe door. Turn off the power to the lock. The switch is located on

the hinge side of the door. The sign “I” is for power on and the sign “O” is for

power off.

Remove the two brass screws between the sliding bolts on the front of the

door and the hinges on the back of the door. Lift off the door cover, remove

the battery pack and replace the 4 batteries. Replace the door cover and the

screws and turn on the power to the lock.

WALL/BASE FIXING INSTRUCTIONS

FOR SS0980E SERIES

You will find inside your safe the following items for the wall or base fixing of

your safe:

2 x M10 x 42mm rawl bolts

2 x washers

Locate the safe into the required position. Open the door and mark the fixing

holes.

Remove the safe and drill 2 holes where the floor or wall is marked using a

12mm masonry drill bit to a depth of 42mm. And insert the rawl bolts.

Locate the safe back into position, insert the bolts with washers fitted and

tighten to wall or floor.

BATTERIES

Your safe will arrive with transit batteries installed and they can be tested by

pressing the # key once. If in good condition “BA-HI”will appear in the LCD

display. If in poor condition “BA-LO” will appear.

Andere Phoenix Sicher Handbücher

Phoenix

Phoenix DIAMOND DEPOSIT HS1090 Produktinformationsblatt

Phoenix

Phoenix NESO SS0200F Series Bedienungsanleitung

Phoenix

Phoenix FS2230K Series Bedienungsanleitung

Phoenix

Phoenix FS1280F Bedienungsanleitung

Phoenix

Phoenix SS0992K Produktinformationsblatt

Phoenix

Phoenix SS0987E Series Bedienungsanleitung

Phoenix

Phoenix PALLADIUM LS8000 Series Bedienungsanleitung

Phoenix

Phoenix PS610-E36 Produktinformationsblatt

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Phoenix

Phoenix SS1160 Produktinformationsblatt

Phoenix

Phoenix NEXT PLUS LS7010 Bedienungsanleitung

Phoenix

Phoenix FS1650E Produktinformationsblatt

Phoenix

Phoenix SS1190K Installations- und Benutzerhandbuch

Phoenix

Phoenix FIRE COMMANDER PRO FS1920 Produktinformationsblatt

Phoenix

Phoenix FS0440E Bedienungsanleitung

Phoenix

Phoenix Venus Bedienungsanleitung

Phoenix

Phoenix FS1510E Series Bedienungsanleitung

Phoenix

Phoenix FIRE COMMANDER FS1910E Bedienungsanleitung

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Phoenix

Phoenix KS0002C Bedienungsanleitung

Phoenix

Phoenix CITADEL SS1190 Produktinformationsblatt

Phoenix

Phoenix GS8010K Produktinformationsblatt

Phoenix

Phoenix FS0352C Series Bedienungsanleitung

Phoenix

Phoenix PLANET HS6070 Produktinformationsblatt

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

Honeywell

Honeywell 5912 Bedienungsanleitung

Technomax

Technomax Trony Series Handbuch

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung

Ankaro

Ankaro ANK EZ I Bedienungsanleitung

Intratone

Intratone KEY SAFE Leitfaden

Costway

Costway HW50956 Bedienungsanleitung

Megasat

Megasat K Series Bedienungsanleitung

ECOSAFE

ECOSAFE 3030ARD Bedienungsanleitung