Phoenix GRAVITY Bedienungsanleitung
Register your product to get continual support at
www.phoenixwaterfilters.com.au
PHOENIX GRAVITY
User Guide
Welcome to Phoenix!
Thank you for buying the Phoenix Gravity!
Congratulations on your first step to creating a
healthier life and greener planet.
To fully benefit from the support that Phoenix
offers, register your product online today.
Important
Read this user manual carefully before you use
your Phoenix Countertop and save it for future
reference.
Warning
Children should be supervised to ensure
that they do not play with the water
filter.
The cartridges and accessories are
designed for use with cold or room
temperature water. Hot water may
damage the filter.
Features
The housing of the Phoenix Gravity is
made of high quality stainless steel.
The filtration system consists of a 3 stage
ceramic filtration technology.
First Stage: The first stage consists of
the Phoenix Spirit ceramic which is
manufactured to provide genuine sub
micron filtration. The cartridge reduces
fine particulate matter, bacteria, cysts
and turbidity.
Second Stage: The incorporation of silver
locked within the ceramic structure
inhibits the growth of bacteria and gives
enhanced bacteriostatic and self
sterilizing properties.
Third Stage: An inner core of activated
carbon removes chlorine, VOC's and
industrial solvents.
Applications
Only use the Phoenix Water Filter to
filter water that meets the drinking
water standards.
Do not use filtered water in aquariums or
to water plants, it can be harmful to the
fish and the plants.
Installation
Step 1:
Using a screw driver, screw
knob (D) on lid (A).
Step 2:
Insert one rubber ring over
the stem of the tap (G) and
position the tap in the hole in
chamber (C). Insert another
rubber ring over the stem on
the inner side of (C) and using the wing nut,
tighten it firmly. You will not need any tools to
tighten the nut. The rubber rings will hold the
tap in place preventing leakage.
Step 3:
Place the base rubber ring (F) on a flat surface
and place the lower chamber of the housing (C)
over it. Applying pressure gently, fit the rubber
ring in place.
Step 4:
Using the similar technique as in
step 2, attach the two provided
cartridges (E) to chamber (B).
Step 5:
Finally place chamber (B) over chamber (C) and
close it with the lid (A).
The installation of the filter is now complete,
hassle free.
Usage
When using brand new cartridges, it is
advisable to dispose of the first 8 litres of
filtered water. Doing this removes the
discoloration of the water due to the unused
activated carbon, as well as relieving the muddy
taste of the freshly manufactured ceramic.
A reduction in the flow rate indicates the need
to clean the filter. Scrub the candle under
running water with a scouring pad to expose a
new layer of ceramic. However, due to the
activated carbon exhaustion, the Spirit cartridge
is to be replaced every six months.
The Phoenix Spirit candle offers a lifetime of
3000 litres or 6 months, whichever comes first.
When not in use air-dry the spirit cartridge for a
minimum of 24 hours then store in dry place.
Head Office:
Phoenix Water Filters Pty Ltd
56 River Street,
South Yarra, VIC 3141.
Phone: 1300 833 771
Inhaltsverzeichnis
Andere Phoenix Wasserfiltersystem Handbücher
Beliebte Wasserfiltersystem Handbücher anderer Marken
Gaggenau
Gaggenau BRITA INTENZA 467873 Bedienungsanleitung
Brita
Brita SAFF-100 Bedienungsanleitung
HEISSNER
HEISSNER FPU24000-00 Bedienungsanleitung
BGS technic
BGS technic 1518 Bedienungsanleitung
Reverse Osmosis
Reverse Osmosis RF Series Bedienungsanleitung
ubbink
ubbink Filtramax Series Bedienungsanleitung