Phonak Combi BTE Bedienungsanleitung
Phonak Charger
Combi BTE
User Guide
Phonak Charger Combi BTE
2
Non wireless charging accessories
Phonak Charger Combi BTE
Optional Power Pack
This user guide is valid for:
3
Your charger details
Device
Phonak Charger Combi BTE
incl. power supply and USB cable (< 1 m)
Compatible hearing aid models
c Phonak Naída P-PR (P90/P70/P50/P30/Trial)
c Phonak Bolero M-PR (M90/M70/M50/M30/Trial)
c Phonak Sky M-PR (M90/M70/M50/M30/Trial)
cPhonak Roger Focus II
Please also read safety information regarding
handling the charger (chapter 10).
4
Your charger has been developed by Phonak – a world
leader in hearing solutions based in Zurich, Switzerland.
The Phonak Charger Combi BTE is a device intended to
charge rechargeable hearing aids.
Please read the user guide carefully to make sure that you
understand and get the best out of your charger. For more
information regarding features, benets, setup, use and
maintenance or repairs – contact your hearing care
professional or manufacturer representative. Additional
information can be found in the datasheet of your
product.
Phonak - life is on
www.phonak.com
5
Contents
Your charger
1. Parts of the charger
Using the charger
2. Preparing the charger
3. Charging the hearing aids
4. Using the optional Power Pack
Further information
5. Operation, transport and storage conditions
6. Care and maintenance
7. Service and warranty
8. Compliance information
9. Information and description of symbols
10. Troubleshooting
11. Important safety information
6
8
9
15
18
19
21
23
27
32
34
6
1. Parts of the charger
Space for earpieces
Hearing aid charging
slots with left/right
indicators
Charger
Charger Combi BTE
Indicator light for power
micro-USB connection
to external power supply
Power Pack
Charger Combi BTE with optional Power Pack
7
USB cable (< 1 m)
Power supply with
wallplug adapter
Accessories
Power supply and charger specication
Power supply output voltage: 5 VDC +/-5%, current 1 A
Power supply input voltage: 100-240 VAC, 50/60Hz, current
0,25 A
Charger input voltage: 5 VDC +/-5%, current 150 mA
Charger output voltage: 5 VDC +/-10%, current 100 mA
USB cable specications: 5 V min. 1 A, USB-A to micro-USB,
maximum length 1 m
micro-USB connection to external power supply
Indicator light for battery
status and external power
Battery check button
Power Pack lock and release
8
2. Preparing the charger
a) Plug the larger end of the charging cable into the
power supply.
b) Plug the smaller end into the USB port on the charger.
c) Plug the power supply into a power outlet.
d) The indicator light is green when the charger is
connected to the power supply
Connecting the power supply
ab
d
c
9
3. Charging the hearing aids
Low power: You will hear two beeps when the
battery is low. You will have approximately
60 minutes before you have to charge the hearing
aids (this can vary, depending on the hearing aid
settings).
Before using your hearing aids for the rst time, it
is recommended to charge them for 3 hours.
The hearing aids must be dry before charging,
see chapter 5.
Please ensure to charge and use the hearing aids
within operating temperature range: +5° to +40°
Celsius (41° to 104° Fahrenheit).
10
Please refer to chapter 2 for how to set up the charger.
1.
Insert the hearing aids into the charging slots.
The hearing aids will automatically be switched o when
inserted into the charger.
Make sure the left and right hearing aid markings
match the left (blue), right (red) indicators next to
the charging slots.
Inhaltsverzeichnis
Andere Phonak Akkuladegerät Handbücher
