Phonic POWERPOD408 Bedienungsanleitung

POWERPOD408 USER’S MANUAL PHONIC CORPORATION

Page 2

SAFETY PRECAUTIONS

SAFETY PRECAUTIONS!

WARNING - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EX-

POSE THIS UNIT TO RAIN OR MOISTURE.

Do not allow water or liquids to be spilled into this unit. If the unit has been exposed to rain or liquids, please

unplug the power cord immediately from the outlet (with DRYHANDS) and get a qualiﬁed service technician

to check it. Keep this unit away from heat sources such as radiators, heat registers, stoves, etc.

This unit contains no user-serviceable parts. Refer all service needs to a qualiﬁed

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVERS (OR

BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER ALL SERVICING TO

A QUALIFIED SERVICE PERSONNEL.

Keep this unit clean by using a soft dry brush and occasionally wiping it with a damp cloth. Do not use any

other solvents, which may damage the paint or plastic parts. Regular care and inspection will be rewarded

by a long product life and maximum reliability.

This unit was carefully packed at the manufacturing site and the packing box was designed to protect the

unit from rough handling. We recommend that you carefully examine the packaging and its contents for any

signs of physical damage which may have occurred during transportation.

If the unit is damaged: Notify your dealer and the shipping company immediately. Claims for damage

or replacement may not be granted if not reported properly or in a timely manner.

Thistriangle onyour componentalerts you

tothepresence ofuninsulated“ dangerous

voltage” inside the enclosure that may be

sufﬁcient to constitute a risk of shock.

This triangle on your component alerts

you to important operating and mainte-

nance instructions in this accompanying

service engineer through a Phonic dealer.

POWERPOD408 USER’S MANUAL

INTRODUCTION...........................................4

FEATURES ............................................................4

GETTING STARTED.......................................4

TYPICAL CONNECTING LEADS.....................5

CHANNEL STRIP DESCRIPTION.....................6

LOW EQ..................................................6

HIGH EQ.....................................................6

LEVEL CONTROL.......................................6

MIC & LINE INPUT.....................................6

EFFECT .....................................................6

MASTER SECTION DESCRIPTION.................7

POWER INDICATOR................................7

DIGITAL DELAY.......................................7

TAPE IN CONTROL..................................7

MASTER CONTROL..................................7

TAPE IN AND REC OUT............................7

REAR PANEL DESCRIPTION....................8

POWER SWITCH................................8

SPEAKER OUTPUT JACKS......................8

MAIN OUT/AMP IN...............................8

APPLICATION ................................................ 9

GENERAL APPLICATION.........................9

LIVE BAND WITH ADDITIONAL

AMPLIFIER........................................10

DIMENSIONS............................................11

SPECIFICATIONS...................................12

PANEL LAYOUT............................................13

SYSTEM BLOCK DIAGRAM....................14

APPENDIX..........................................15

CONTENTS

PHONIC CORPORATION Page 3

v1.5 9/15/2004

POWERPOD408 USER’S MANUAL

GETTING STARTED

1. Beforeturning onthe power, setthe Masteroutput

control to the off position.

2. Always turn the power off before connecting or

disconnecting cables.

3. Cleck the AC Voltage before connecting the AC

plug.

4. Do not obstruct the back panel at all for proper

ventilation.

PHONIC CORPORATIONPage 4

INTRODUCTION / FEATURES / GETTING STARTED

INTRODUCTION

Congratulations on your purchase of the Phonic

Powerpod408Powered Mixer.The Powerpod408

is built into a rugged wooden cabinet for heavy-

duty use. In order to get the best performance

from your Powerpod408, please read all of this

safety and operation manual before operating

the mixers and keep the manual for future refer-

ence.

FEATURES

4 mono input channels for a wide range of Mi-

crophoneand Linelevel signalsfrom separate

input sockets

 Built-in 80 watt power ampliﬁer (max. output)

 Built-in Digital Delay

Super musical 2-band EQ at mono chan-

nels

 Record out

 Tape in

POWERPOD408 USER’S MANUALPHONIC CORPORATION Page 5

TYPICAL CONNECTING LEADS

POWERPOD408 USER’S MANUAL PHONIC CORPORATION

Page 6

CHANNEL STRIP DESCRIPTION

1 LOW EQ

The control has shelving response giving 15dB of boost or cut

at 80Hz. Add warmth to vocals or extra punch to guitars, drums

and synths by turning to the right. Turn to the left to reduce stage

rumble, hum or to improve a mushy sound.

2 HIGH EQ

Turn to the right to boost high frequencies, adding crispness to

percussion from drum machines, cymbals and synths. Turn to the

leftto cutthese frequencies,reducing sibilanceor hiss.Thecontrol

has a shelving response giving 15dB of boost or cut at 12kHz.

3 LEVEL CONTROL

The Level Control determines the proportion of the channel sig-

nal in the mix, and provides a clear visual indication of channel

level.

4 MIC & LINE INPUT

The MIC input accepts XLR phone jack while the LINE input

accepts a 1/4

”

type phone jack. Please use a low impedance

microphone and a properly wired cable for best results. You can

only use one of the two connectors at the same time.

5 EFFECT

This knob decides the signal level which will be sent to the built-in

digital delay effect control.

POWERPOD408 USER’S MANUAL Page 7

MASTER SECTION DESCRIPTION

6 DIGITAL DELAY

The signal from the input channels, processed

bythe built-in digitaldelay willfeedto themaster

output.Thereare threeknobshere tocontrol the

effect of digital delay.

LEVEL

This knob adjusts the mix level of the effect

sound.

TIME

Thisknob adjusts theinternal time ofthe delays;

turn to the right to increase the interval time be-

tween two delays.

REPEAT

Toincreasethe rate of the delays, turnthis knob

to the right. You will hear the signal repeat at a

faster rate.

7 POWER INDICATOR

When the power switch at the rear panel is

turned on , this indicator will illumnate so the

user may be aware of it.

8 TAPE IN CONTROL

This knob adjusts the level of signal from the

Tape In to the Main bus.

9 MASTER CONTROL

This adjusts the ﬁnal level of the Main bus. It

controls the Main bus signal which is output to

the speakers.

10 TAPE IN AND REC OUT

TheTAPEINsockets allowcassette recordersor

CD players to be added to the Main output. The

RECORD OUTPUT, with RCA phono sockets,

provides signal output to a cassette deck and

homeaudioequipment.Thenominaloutput level

and impedance are -10dBV/600ohms.

PHONIC CORPORATION

MASTER SECTION DESCRIPTION

POWERPOD408 USER’S MANUAL PHONIC CORPORATION

Page 8

REAR PANEL DESCRIPTION

11 POWER SWITCH

This switches the powered mixer on and

off. While turn it on, the power on blue LED

indicator will light up on the master section

of front panel.

12 SPEAKER OUTPUT JACKS

Speakers can be connected to these sock-

ets, two speakers can be connected to the

powered mixer. When using 2 speakers at

the same time, use 8~16 ohms speakers.

When using one speaker only, use a 4~8

ohms speaker. The total minimum required

load is 4 ohms. If the total load is less than

4 ohms, it may damage this powered mixer.

13 MAIN OUT / AMP IN

This unbalanced insert point is a break between the main

out and built-in ampliﬁer to allow the main output to be

sent to an external signal processor or power ampliﬁer.

The insert is a 1/4

’

phone jack socket which is normally

bypassed. When a jack is inserted, the signal path is

broken.

Themain output signal appearson theTIPof the plugand

the external signal is returned on the RING. A

“

”

lead

may be required to connect to equipment with separate

send and return jacks as shown below:

POWERPOD408 USER’S MANUAL

PHONIC CORPORATION Page 9

APPLICATIONS

GENERAL APPLICATION

POWERPOD408 USER’S MANUAL PHONIC CORPORATION

Page 10

APPLICATIONS

LIVE BAND WITH ADDITIONAL AMPLIFIER

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Phonic Musikmixer Handbücher

Phonic

Phonic MU1722X Bedienungsanleitung

Phonic

Phonic MM122 Bedienungsanleitung

Phonic

Phonic MU1722X Bedienungsanleitung

Phonic

Phonic AM440 Bedienungsanleitung

Phonic

Phonic powerpod 630rw Bedienungsanleitung

Phonic

Phonic POWERPOD1860 Bedienungsanleitung

Phonic

Phonic MM1002 Bedienungsanleitung

Phonic

Phonic Powerpod 415RW Bedienungsanleitung

Phonic

Phonic MM122 Bedienungsanleitung

Phonic

Phonic Powerpod 740 R Bedienungsanleitung

Phonic

Phonic celeus 600 Bedienungsanleitung

Phonic

Phonic HELIX BOARD 18 FIREWIRE MKII Bedienungsanleitung

Phonic

Phonic Powerpod 415RW Produktinformationsblatt

Phonic

Phonic Sonic Stion 16 Bedienungsanleitung

Phonic

Phonic POWERPOD 885 PLUS Bedienungsanleitung

Phonic

Phonic POWERPOD 408 Bedienungsanleitung

Phonic

Phonic HELIX BOARD 24 FIREWIRE Bedienungsanleitung

Phonic

Phonic CELEUS TUBE Bedienungsanleitung

Phonic

Phonic POWERPACK 650 Bedienungsanleitung

Phonic

Phonic Helix Board 17 Bedienungsanleitung

Phonic

Phonic HELIX BOARD 12 Plus Bedienungsanleitung

Phonic

Phonic Sonic Station 22 Bedienungsanleitung

Phonic

Phonic AM120 Bedienungsanleitung

Phonic

Phonic HELIX BOARD 12 Bedienungsanleitung

Beliebte Musikmixer Handbücher anderer Marken

Neve

Neve 8816 Bedienungsanleitung

Mackie

Mackie Onyx Analogue Mixer Bedienungsanleitung

Behringer

Behringer EUROPOWER PMP518M Bedienungsanleitung

Peavey

Peavey S-32 Sanctuary Series Bedienungsanleitung

Rane

Rane MP 4 Bedienungsanleitung

True

True T9 Touchscreen Console Bedienungsanleitung

Studiomaster

Studiomaster Air Pro 24 Bedienungsanleitung

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Bedienungsanleitung

Roland

Roland M-160 Bedienungsanleitung

Yamaha

Yamaha MR1642 Bedienungsanleitung

Ecler

Ecler MAC40v Bedienungsanleitung

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Bedienungsanleitung

Veeder-Root

Veeder-Root TLS-350 Series Bedienungsanleitung

Alto

Alto APM80.QUAD Bedienungsanleitung

Omnitronic

Omnitronic PM-211 Bedienungsanleitung

SoundCraft

SoundCraft B400 Bedienungsanleitung

Roland

Roland SoundCanvas SC-8820 Bedienungsanleitung

CARVIN

CARVIN RX 1200 Bedienungsanleitung