PhotoCentric CURE L Bedienungsanleitung

PHOTOCENTRIC

CURE L

INSTALLATION

GUIDE

www.photocentricgroup.com

UK - Cambridge House, Oxney Road, Peterborough, PE1 5YW. +44 1733 349937

USA - 2205 West Parkside Lane, Phoenix, 85027, AZ. (623) 581-3220

CURE L

2Internal fan

5Timer indicator 9Heater

1On O switch

6Heater indicator 10 Door seal

13 Glass shelf

3Temperature unit 7Timer switch 11 Rear UV light

8Hanging bracket 12 Bottom UV light

4Temperature adjustment

PHOTOCENTRIC CURE L INSTALLATION GUIDE

1. Cure L at a glance

Figure 1: Cure L general layout

CURE L

1 2

CURE L CURE L

Figure 3: Cure L space requirements, plan view

3 4

613

660 660

620

MINIMUM DOOR

ANGLE FOR ACCESS

MAXIMUM

DOOR ANGLE

Figure 2: Cure L space requirements, front view

2. Suitable location

When choosing a suitable location for your Photocentric Cure L,

allow plenty of space (see Figure 2 and Figure 3). All diagrams

have dimensions in millimetres unless otherwise stated. Consider

the ergonomics of operating the cure unit.

50724

660

MINIMUM CLEARANCE

FOR VENTILATION

CURE L

NOTES

[email protected]

Cambridge House, Oxney Road, Peterborough, PE1 5YW

www.photocentricgroup.com

Contact for further enquiries

3. Unboxing & Placing Cure L

Remove the outer packaging and recycle it.

Photocentric Cure L weighs 64 kg. Carefully consider how it will

be lifted into position. Allow plenty of space to work and remove

any potential obstructions. Four people will be required to lift

Photocentric Cure L, one at each corner. Use safety gloves with

a secure grip surface to prevent slipping. Ensure everybody

involved is comfortable lifting the weight. Follow safe lifting

practice.

Keep the cure unit level and stable at all times. Always use

Photocentric Cure L in a well ventilated area.

4. Power requirements

• Photocentric Cure L requires a mains power supply

with a voltage of 100 VAC - 240 VAC and a frequency of

50 Hz - 60 Hz. It has a power consumption of 1000 W.

• It will draw a current of 4 A when connected to a 240

VAC supply, or 9 A when connected to a 100 VAC

supply.

• Only connect Photocentric Cure L to the mains socket

using the power cable supplied.

• Always plug the power cable into the mains socket and

the cure unit before switching on the power at the mains

socket.

• Similarly, always switch o the power at the mains

socket before unplugging the power cable from either

the cure unit or the mains socket.

• The cure unit power socket is on the back of the machine

on the right side. The power switch is on the front of the

machine, at the top left (Figure1-1).

CURE L CURE L

Inhaltsverzeichnis

Andere PhotoCentric 3D-Drucker Handbücher

PhotoCentric

PhotoCentric Liquid Crystal MAGNA Bedienungsanleitung

PhotoCentric

PhotoCentric Liquid Crystal Opus Bedienungsanleitung

PhotoCentric

PhotoCentric CURE M Bedienungsanleitung

PhotoCentric

PhotoCentric LC Pro Bedienungsanleitung

PhotoCentric

PhotoCentric Liquid Crystal Dental Bedienungsanleitung

PhotoCentric

PhotoCentric LC Precision Bedienungsanleitung

PhotoCentric

PhotoCentric LC MAGNA Bedienungsanleitung

PhotoCentric

PhotoCentric CURE M+ Bedienungsanleitung

PhotoCentric

PhotoCentric AIR WASH L Bedienungsanleitung

PhotoCentric

PhotoCentric WASH 99 Bedienungsanleitung

PhotoCentric

PhotoCentric Liquid Crystal Pro Bedienungsanleitung

PhotoCentric

PhotoCentric LC HR2 Bedienungsanleitung

PhotoCentric

PhotoCentric LC MAGNA Handbuch

PhotoCentric

PhotoCentric LC HR Bedienungsanleitung

PhotoCentric

PhotoCentric CURE L Bedienungsanleitung

PhotoCentric

PhotoCentric Liquid Crystal MAGNA Bedienungsanleitung

PhotoCentric

PhotoCentric Liquid Crystal HR Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch