Photron FASTCAM Nova Bedienungsanleitung
FASTCAM Nova
Hardware Manual
The copyright of this manual is held by PHOTRON LIMITED.
Product specifications and manual contents are subject to change without notice.
PHOTRON LIMITED bears no responsibility for any results by using our products nor by applying this manual to any operations.
WARNING
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Introduction
Introduction
Thank you for your purchase of Photron’s high-speed camera system, the “FASTCAM NOVA”
(referred to below as the system).
This manual contains the operating instructions and warnings necessary for using the system.
Before using the system, please read the entire manual.
If any part of this manual is unclear, contact Photron using the contact information printed at
the back of the manual.
After you finish reading the manual, store it in a safe place along with the warranty card and
refer back to it when necessary.
Using the Manual
Using the Manual
Using the Manual
Using the Manual
This section explains the layout of the manual.
Introduction
The introduction explains the manual and safety precautions.
Chapter 1, Setup
This chapter gives an overview of the components that make up the system. It also explains basic keypad
operation and a list of items that should be checked before using the system.
Chapter 2, Recording
This chapter explains operations related to recording.
Chapter 3, Product Specifications
This chapter explains the system’s specifications.
Chapter 4, Product Specifications
This chapter explains about the warranty.
Chapter 5, Contacting Photron
This chapter lists the contact information to use when contacting Photron if the system malfunctions or if a
portion of the manual is unclear.
Manual Notation
Manual Notation
The following icons and symbols are used in the explanations in this manual.
Icon/Symbol
Description
This symbol indicates supplementary items to be aware of
when using the software.
This symbol indicates the location of a reference.
This symbol indicates content that should always be read.
This symbol indicates instructions that should always be
followed when using the software, or things to be careful of
when using the software.
" "
This symbol is used to indicate the names of items on a
screen, references, dialog names, and connectors.
[ ]
This symbol is used to indicate menu names, and
sub-menu names.
Using the System Safely and Correctly
Using the System Safely and Correctly
In order to prevent injury to yourself and others, and to prevent damage to property, carefully
observe the following safety precautions.
Photron has given its full attention to the safety of this system. However, the extent of damage
and injury potentially caused by ignoring the content of the safety precautions and using the
system incorrectly is explained next. Please pay careful attention to the content of the safety
precautions when using the system.
This symbol indicates actions that carry the risk that a person could receive a
serious injury.
This symbol indicates actions that carry the risk that a person could receive a
moderate injury, or that damage to physical property might occur.
The safety precautions to be observed are explained with the following symbols.
This symbol indicates actions that require caution.
This symbol indicates actions that are prohibited and must be avoided.
This symbol indicates actions that must always be performed.
Caution
Warning
Using the System Safely and Correctly
■Do not perform actions that will damage the AC cable or plug.
(Do not damage the cable, modify it, use it near a heater, excessively bend, twist or pull
on it, place heavy objects on it, or bundle it.）
Using the cable when damaged can cause fire, electric shock, or a short circuit.
■Do not use the system in a manner which will exceed the rating of the power outlet
or wiring equipment used.
Exceeding the power rating might cause a fire from excessive heat.
■Do not insert metallic objects inside, or pour liquids such as water on, the system.
Doing so can cause fire, electric shock, or malfunction from short circuit or heat.
■Do not disassemble or modify the system.
There are high voltages inside the system that can cause electric shock.
■Do not plug in or unplug the power cord with wet hands.
Doing so can cause electric shock.
■Make sure the power plug is fully insert into the socket
Not fully plugging in the power cable can cause fire from electric shock or heat.
■When something is wrong with the system, unplug the power cable immediately.
- When a foreign substance or liquid, such as metal or water, gets inside.
- When the outer case is broken or damaged, such as from a fall.
- When the system produces smoke, a strange smell, or strange sound.
Using the system in these conditions might cause a fire or electric shock.
■Do not use the accessories by the usage that a manufacturer does not specify. It may
cause damage of protection.
Warning
Using the System Safely and Correctly
■Always unplug the system when cleaning it or when it is unused for a long period of
time. Leaving or storing the system connected to the power source might cause fire
from insulation deterioration or electrical discharge.
■Please consult us in advance when you perform an event by which laser light or direct
rays fall on the image sensor surface.
■Do not set the system in a location where the temperature gets unusually hot.
The trunk and inside of a car can get especially hot in summer.
Doing so can cause the outer case and internal components to deteriorate or cause a
fire.
■Do not place the system in a location prone to oily smoke or steam, or in a location
with a lot of humidity or dust.
Oil, moisture, and dust conduct electricity, which can cause a fire or electric shock.
■Ambient temperature 0-45°C, humidity 80% RH or lower, maximum altitude 2,000m
or lower. In addition, if exceeding these limits, use in a condensation-free environment.
Use in a condition out of the above limits can cause malfunction.
■Do not store the equipment in a location where the temperature goes below -20°C or
higher than 60°C. Also, prevent condensation from forming during shipment.
■When shipping, remove the connecting cable and use the original packaging or a
dedicated carrying case.
Do not ship the equipment in an environment where the temperature goes below -20°C
or higher than 60°C. Also, prevent condensation from forming during shipment.
Caution
Using the System Safely and Correctly
■This system has a handle, but this assumes use of camera installation and
transportation.
When recording, please fix the equipment using a stand, tripod, etc and do not record
with the handle being carried.
■When installing the camera with a tripod, please check the tripod load capacity and
be careful not to exceed the load bearing capacity.
Also, when using a tripod, please make sure that the tripod, tripod screw, panhead, and
others are properly set, and be careful not to fall down the tripod.
■Although this camera is compatible with outdoor use, the AC power supply unit is not
outdoor compatible. When using it outdoors, prepare another power supply.
Caution
Using the System Safely and Correctly
“CE” mark indicates that this product complies with the European requirements for safety,
health, environment and customer protection. “CE” mark equipments are intended for sales in
Europe.
These symbols indicate that this product is not to be disposed of with your household
waste, according to the WEEE Directive (2002/96/EC), the Battery Directive
(2006/66/EC) and/or your national laws implementing those Directives.
This product should be handed over to a designated collection point, e.g., on an
authorized one-for-one basis when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic equipment (EEE) and
batteries and accumulators. Improper handling of this type of waste could have a
possible impact on the environment and human health due to potentially hazardous
substances that are generally associated with EEE. Your cooperation in the correct
disposal of this product will contribute to the effective usage of natural resources.
For more information about the recycling of this product, please contact your local city
office, waste authority, approved scheme or your household waste disposal service or
visit www.photron.com.
(EEA: Norway, Iceland and Liechtenstein)
This product is in conformity with the protection requirements of EU Council Directive
2014/30/EU (Class A) on the approximation of the laws of the Member States relating
to electromagnetic compatibility.
Warning: This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate measures.
European Union (and EEA) only
Inhaltsverzeichnis
Andere Photron Digitalkamera Handbücher
Photron
Photron Fastcam SA2 Bedienungsanleitung
Photron
Photron FASTCAM ultima SE Bedienungsanleitung
Photron
Photron FASTCAM-PCI Bedienungsanleitung
Photron
Photron FASTCAM Multi Bedienungsanleitung
Photron
Photron FASTCAM MH6 Bedienungsanleitung
Photron
Photron IDP-Express R2000 Bedienungsanleitung
Photron
Photron FASTCAM Mini AX100 Bedienungsanleitung
Photron
Photron FASTCAM Multi Bedienungsanleitung
Photron
Photron Fastcam APX RS Bedienungsanleitung
Photron
Photron FASTCAM SA-Z Bedienungsanleitung
Photron
Photron FAST Dock Bedienungsanleitung
Photron
Photron Fastcam SA3 Bedienungsanleitung
Photron
Photron FASTCAM Mini WX50 Bedienungsanleitung
Photron
Photron FASTCAM Multi Bedienungsanleitung
Photron
Photron FAST Drive Bedienungsanleitung
Photron
Photron Fastcam MC1 Bedienungsanleitung
Photron
Photron FASTCAM Mini GigabitEthernet Interface Gebrauchsanweisung
Photron
Photron Fastcam SA5 Bedienungsanleitung
Photron
Photron FASTCAM SA-X2 Bedienungsanleitung
Photron
Photron FASTCAM Mini WX50 Bedienungsanleitung
