Phottix Laso Bedienungsanleitung
1
INSTRUCTION MANUAL
En
Laso
Phottix Laso TTL Flash
Trigger for Canon
INSTRUCTION MANUAL 2
说明书 62
說明書 117
En
CnSimp
CnTrad
2
The product is classied as Class 3R laser
product, according to the following
standards IEC/EN 60825-1 "Radiation Safety
of Laser Products."
Class 3R: A Class 3R laser is considered safe
if handled carefully, with restricted beam
viewing. With a class 3R laser, the MPE can
be exceeded, but with a low risk of injury.
Visible continuous lasers in Class 3R are
limited to 5 mW. For other wavelengths and
for pulsed lasers, other limits apply.
3
INSTRUCTION MANUAL
En
Thank you for purchasing a Phottix
Product
Note: Before using the Phottix Laso TTL Flash
Trigger for Canon, please read this instruction
manual carefully, while also referring to the
instruction manuals of your camera, ash and
other relevant devices.
Phottix Laso Wireless Trigger for
Canon Transmitter
The Phottix Laso Transmitter is used for wireless
ash shooting. It can control up to 5 groups (15
units) of radio-enabled Canon Speedlites, as
well as non-wireless Canon ETTL Speedlites by
using the Phottix Laso Receiver. The Transmitter
supports multiple ash modes and shooting
approaches including E-TTL II/E-TTL, Manual,
MULTI, Ext.A and Linked Shooting.
Warnings
1. This product is a precise electronic
instrument. Do not expose to damp
environments or dust.
2. Please shut down the power of all devices
when installing the wireless trigger.
3. Do not drop or crush.
4. Do not use the wireless trigger in ammable,
explosive or high temperature environments.
5. Do not use harsh chemicals or solvents to
clean the body. Use a soft cloth or lens paper.
4
6. Remove batteries from the wireless trigger if
not being used for an extended period.
7. Interference: The Phottix Laso wireless
trigger transmits radio signals at 2.4GHz. Its
performance can be aected by electrical
current, magnetic elds, radio signals, wireless
routers, cellular phones, and other electronic
devices. Environmental objects, such as large
buildings or walls, trees, fences, or cars can
also aect transmission performance. If your
wireless trigger can’t be triggered, move its
location slightly.
FCC Interference Statement:
This device complies with part 15 of the FCC
Rules. Operation is subject to the followingtwo
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled
environment. This device and its antenna must
not be co-located or operating in conjunction
with any other antenna or Transmitter.
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B digital
5
INSTRUCTION MANUAL
En
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment o and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the
equipment and Receiver.
-- Connect the equipment into an outlet on
a circuit dierent from that to which the
Receiver is connected.
-- Consult the dealer or an experienced radio/
TV technician for help.
6
Table of Contents
I. Parts --------------------------------------------------------------------------------------------------------------------
-
-8
II. Preparation Before Use ------------------------------------------------------------------------------------------
10
III. The LCD Display---------------------------------------------------------------------------------------------------17
IV. Wireless Flash Shooting: Radio Transmission-----------------------------------------------------------21
1. Wireless Flash Setting-------------------------------------------------------------------------------------------22
2. ETTL: Fully Automatic Wireless Flash Shooting-----------------------------------------------------------27
3. Using Fully Automatic Wireless Flash-----------------------------------------------------------------------29
4. ETTL: Wireless Multiple Flash Shooting with Flash Ratio-----------------------------------------------33
5. M:Wireless Multiple Flash Shooting with Manual Flash Output--------------------------------------38
6. Multi:-------------------------------------------------------------------------------
--
--------------------------
-----
-40
7
INSTRUCTION MANUAL
En
7. Gr: Shooting with a Dierent Flash Mode for Each Group---------------------------------------------41
8. Linked Shooting --------------------------------------------------------------------------------------------------44
V. Setting Transmitter Functions with Camera Operations ---------------------------------------------47
VI. Customizing the Transmitter----------------------------------------------------------------------------------51
1.C.Fn: Setting Custom Functions-------------------------------------------------------------------------------52
2.P.Fn: Setting Personal Functions ------------------------------------------------------------------------------55
VII. Trouble Shooting Guide ---------------------------------------------------------------------------------------57
VIII. Technical Specication ---------------------------------------------------------------------------------------58
8
I. Parts
1. <LINK> indication light: Radio
transmission conrmation lamp
2. LCD panel
3. Function Button 1
4. Function Button 2
5. Function Button 3
6. <MODE>: Flash mode button
7. < >: Charge lamp/Test ash
button
8. < >: Select/Set button
9. < >: Select dial
10. Mounting foot lock lever
11. Battery compartment cover
12. Function button 4
1
3
6
7
8
9
2
11
5
4
12
13
14
15
10
9
INSTRUCTION MANUAL
En
13. < >: Linked shooting button
14. Power button
15.
Flash exposure conrmation lamp
16. Lock-release button
17. USB port
18. Remote release terminal
19. Contacts
20. Mounting foot
21. Locking pin
22. AF assist light
19
16
17
18
20
21
22
10
II. Preparation Before Use
Installing the Batteries
1. Press the battery compartment cover and
slide it left as shown to open the battery
cover. (See Picture 1)
Picture 1
Picture 2
2. Insert the batteries as shown. Make sure
the “+” and“-”battery contacts are correctly
oriented as shown. (Note: Please use 2 AA
alkaline batteries or NI-MH batteries). (See
Picture 2)
3. Replace the battery cover and push back
into the locked position.
Andere Handbücher für Laso
1
Inhaltsverzeichnis
Sprachen:
Andere Phottix Kamerazubehör Handbücher
Phottix
Phottix Nuada R3 Bedienungsanleitung
Phottix
Phottix PPL-200 Bedienungsanleitung
Phottix
Phottix Atlas Bedienungsanleitung
Phottix
Phottix odin II TTL Bedienungsanleitung
Phottix
Phottix Atlas II Bedienungsanleitung
Phottix
Phottix Odin Bedienungsanleitung
Phottix
Phottix Atlas Bedienungsanleitung
Phottix
Phottix Odin TTL Bedienungsanleitung
Phottix
Phottix Nuada S VLED Bedienungsanleitung
Phottix
Phottix Strato TTL Bedienungsanleitung
Phottix
Phottix Odin Bedienungsanleitung
Phottix
Phottix TR-90 Bedienungsanleitung
Phottix
Phottix Juno Bedienungsanleitung
Phottix
Phottix Nuada Ring 10 Bedienungsanleitung
Phottix
Phottix Ares II Bedienungsanleitung
Phottix
Phottix Strato II Multi Bedienungsanleitung
Phottix
Phottix odin II TTL Bedienungsanleitung
Phottix
Phottix Trafo Mini Bedienungsanleitung
Phottix
Phottix Trafo Bedienungsanleitung
Phottix
Phottix odin II TTL Bedienungsanleitung
