PI Manufacturing HDMI-401-MS Bedienungsanleitung
Operation Manual
HDMI-401-MS
Introduction
4x1 HDMI Multiviewer /
Switch
The 4x1 HDMI multiviewer / switch provides a solution
to display up to 4 HDMI sources simultaneously on one
HDMI display at resolutions up to 1080p / 60Hz. The
device features full screen, dual screen, and quad
screen display modes, which can be switched through
a remote control or by the button located on the device
for easy conguration. Constructed with metal for
durability, the device is also wall mountable and comes
with the screws and hardware for easy mounting.
Physical Connection
Features
• Simultaneously display four HDMI sources on a single
display
• 4 x HDMI inputs and 1 x HDMI output
• Supports resolutions up to 1080p / 60Hz
• Supports full screen, dual screen, and quad screen
display modes
• Modes can be switched through remote control or by
the button in front of the device
• Wall mountable design
• Metal casing for durability
6. HDMI Signal Input
1. 12V DC Input
2. HDMI Signal Output
3. Audio Button
4. Mode Button
5. IR Signal Input
Front Panel
Remote Control
Rear Panel
Connection Diagram
3 4
1
2
HDMI 4X1 QUAD MULTI-VIEWER SWITCHER
OUTPUT
HDMI AUDIODC 12V MODE IR
OUTPUT
HDMI AUDIODC 12V MODE IR
1 2 3 4 5
INPUT
HDMI 2 HDMI 3 HDMI 4
HDMI 1
6
21 43 1
2 3 4
1 2
3 4
RES
HDMI 4x1 Quad Multi-Viewer Switcher
A
HDMI Display
HDMI Sources (Supports up to 4)
AUDIOINPUT(9-16) AUDIO
OUTPUT
VGA
HDMI LAN
AUDIO
INPUT
VIDEOINPUT
15 13 11 9 7 5 3 1
1
3
4
5
6
7
8 2
16 14 12 10 8 6 4 2
G
+ - 123 4 5 6 78910 11 12 13 14 15 16
ALARM SENSOR
RS485
HDMI Output
HDMI Inputs
HDMI Switch
1. Connect HDMI sources to the HDMI inputs on the
4x1 HDMI Multiviewer / Switch.
2. Connect a HDMI cable from the HDMI output on
the 4x1 HDMI Multiviewer / Switch to a HDMI
display.
3. The display layout can be controlled via the
remote control or push button on the switch itself.
Connection Instructions
Display Modes
A
Full Screen Mode
A B
Dual Mode
AB
A
C D
B
C
D
Quad Mode 1
Quad Mode 2
A D
B
C
Quad Mode 3
Specications
HDMI Input / Output
Video Formats
HDCP
TMDS Signal 0.7~1.5Vp-p (TMDS)
1.2
1080p / 50 / 60Hz
1080i / 50 / 60Hz
720p / 50 / 60Hz
576p / 50Hz
576i / 50Hz
480p / 60Hz
480i / 60Hz
4 - HDMI Input
1 - HDMI Output
Modes Control
Housing
Dimensions (L x W x H)
Net Weight
Power Supply
Power Consumption
Operating Temperature
Storage Temperature
Humidity
DDC Signal 5Vp-p (TTL)
Button control, remote control
Metal
178.5 x 104.74 x 21.2mm
0.75 lbs
12V / 2A
<10W
32 ~ 104°F (0 ~ 40°C)
-4 ~ 140°F (-20 ~ 60°C)
20-90% (non-condensing)
Display Mode Support Full screen, Dual screen ,
Quad screen
What’s Included
Package Includes 1 - 4x1 Quad Multiviewer
Switch
1 - 12V 2A Power Adapter
1 - Remote Control
2 - Mounting Brackets
4 - Screws
1 - User Manual
Troubleshooting
Black Screen / No Signal
Display is not stable
1. Make sure the HDMI input
source resolutions are supported
by the HDMI switch
1. Check and make sure the cable
length is within 1 to 5 meters
2. Change the HDMI cable or
power adapter
The HDMI switch is covered by a 1-year warranty from
PI Manufacturing. Under the warranty, PI Manufactur-
ing will repair or replace the product.
Warranty
Operation Manual
Andere PI Manufacturing Schalten Handbücher
