Pico Technology PicoDiagnostics Bedienungsanleitung

Optical balancing kit

PicoDiagnostics

Quick Start Guide

PicoDiagnostics Optical balancing kit Pico Technology

2 DO254-1

1. Introduction

Thank you for buying the PicoDiagnostics Optical Balancing Kit. Please read

the following information in conjunction with on-screen guidance within

PicoDiagnostics when using the equipment.

2. Safety warnings

Please review the following safety precautions to avoid injury and prevent

damage to the Optical interface unit and Propshaft balancing equipment.

A WARNING identies conditions or practices that could result in injury or

death.

A CAUTION identies conditions or practices that could result in damage to

the product or equipment to which it is connected.

WARNING

Strong magnetic elds may aect or disable the operation of

pacemakers, ICDs and other implanted medical devices. To avoid

injury or death do not use this product if you or other people nearby

are tted with such devices.

The magnet can attract metallic objects or other magnets from

large distances, causing trapping injuries unless care is taken when

handling.

WARNING

To avoid an accident do not operate the PicoDiagnostics kit while

driving the vehicle. Take a passenger with you to operate the

software.

CAUTION

To avoid entrapment take care to route any cables away from moving

parts when using the propshaft balancing accessories.

To avoid melting of cables take care to route them away from hot

engine components when using this product.

To conserve battery life do not store the Optical sensor interface

with a sensor connected. The interface is powered on whenever the

sensor is connected.

Do not apply a voltage to the BNC or 3.5 mm jack connector on the

Optical sensor interface. The BNC connector is an output only.

Strong magnetic elds can damage sensitive electronic devices and

magnetic material such as credit cards or portable storage media.

Your help and eorts are required to protect and keep our

environment clean. Therefore either return this product at the end

of life to the manufacturer or ensure WEEE compliant collection

and treatment yourself. Do not dispose of as unsorted municipal

waste.

Pico Technology Quick Start Guide

DO254-1 3

3. Battery replacement

To replace the batteries:

1. Place the unit face down and remove the four securing screws.

2. Remove the base cover.

3. Remove the 3 AAA batteries and replace with new ones.

4. Replace the base cover and secure.

5. Do not dispose of the batteries as unsorted municipal waste. Contact a

qualied recycler for disposal.

4. Magnetic base mounting instructions

1. Verify the mounting surface is at and free from contamination.

2. Postion the unit in the desired location.

3. Turn the locking switch to secure.

4. Adjust position of sensor as required using the adjustment knob.

5. Storage

Turn o the magnetic base when in storage. Disconnect the optical sensor

from the interface box to avoid draining the batteries.

6. Troubleshooting

Problem Check Action

Optical sensor

interface not

working

Is LED on?

Yes Refer to edge detection

check below

No Check power is on, replace

battery

Does green edge

detection indicator

LED work when tested?

Yes Check BNC lead

No Check sensor

7. Specifications (excluding scope)

Optical sensor interface battery type 3 x AAA, user-replaceable

Optical sensor interface (typical) battery life 15 hours

Output BNC 0 to 2 V, DC-coupled

Optical sensor type LED

Optical sensor operating distance <1 m

Optical sensor speed range 1 to 250 rpm

Approvals CE: Meets EN50581:2012 (RoHS)

PicoDiagnostics Optical balancing kit Pico Technology

4 DO254-1

8. Pack contents

Part Number Description

PA100 Optical kit carry case

TA185 Optical interface and battery

TA186 Optical sensor, 3.5mm jack

TA187 Magnetic base for optical sensor

TA188 Directional tape measure for propshaft balancing

TA240 Reective tape

TA260 BNC to BNC 0.5 m Yellow

Pico Technology, PicoDiagnostics and PicoScope are registered trademarks of

Pico Technology Ltd. The PicoDiagnostics®software is protected by United Kingdom

Patent GB2442797A “Engine diagnostic system”.

Pico Technology North America Inc.

320 N Glenwood Blvd

Tyler

TX 75702

United States

Pico Technology

James House

Colmworth Business Park

St Neots, PE19 8YP

United Kingdom

Andere pico Technology Prüfgeräte Handbücher

pico Technology

pico Technology PicoScope 6000 Series Bedienungsanleitung

pico Technology

pico Technology PicoScope 5000 Series Bedienungsanleitung

pico Technology

pico Technology PicoScope 2000 Series Bedienungsanleitung

pico Technology

pico Technology PicoScope 9400 Series Bedienungsanleitung

pico Technology

pico Technology PicoScope Bedienungsanleitung

pico Technology

pico Technology PicoScope 4000 Series Bedienungsanleitung

pico Technology

pico Technology PicoScope 3000D Series Bedienungsanleitung

pico Technology

pico Technology PicoScope 9400 Series Bedienungsanleitung

pico Technology

pico Technology PicoScope 6000A Series Bedienungsanleitung

pico Technology

pico Technology PicoScope 5000 A Series Bedienungsanleitung

pico Technology

pico Technology PicoScope 6000 Series Gebrauchs- und Pflegehandbuch

pico Technology

pico Technology PicoVNA 106 Handbuch

pico Technology

pico Technology PicoScope 4444 Bedienungsanleitung

pico Technology

pico Technology PicoScope 4000 Series Bedienungsanleitung

pico Technology

pico Technology PicoScope 2000 Series Handbuch

pico Technology

pico Technology PicoScope 3425 Bedienungsanleitung

pico Technology

pico Technology PicoScope 2203 Bedienungsanleitung

pico Technology

pico Technology ADC-100 Bedienungsanleitung

pico Technology

pico Technology PicoScope 2000 Series Bedienungsanleitung

pico Technology

pico Technology PicoScope 6000E Series Bedienungsanleitung

pico Technology

pico Technology TA062 Bedienungsanleitung

pico Technology

pico Technology PicoDiagnostics PicoBNC+ Bedienungsanleitung

pico Technology

pico Technology PicoScope 4000 Series Bedienungsanleitung

pico Technology

pico Technology PicoScope 2000 Series Handbuch

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

pico Technology PicoDiagnostics Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken