PictureTel LIVELAN 2 Installations- und Betriebshandbuch

Upgrading from LiveLAN 2.0 to 3.1

Overview

This guide shows how to upgrade your PC to PictureTel®LiveLAN™ 3.1 from a previous version of LiveLAN.

It assumes you know how to install a PC add-on board, connect a PC to peripheral equipment, and use

Microsoft®Windows®95 applications. Use this guide together with the LiveLAN 3.1 Installation Guide, which

also ships with this kit, to upgrade from LiveLAN 2.0 to LiveLAN 3.1. Review the information in the following

Upgrade Scenarios and Upgrade Summary sections before you begin.

There are two upgrade scenarios, each with a slightly different upgrade path. The scenario you follow

determines the order in which you follow instructions in either this guide or in the LiveLAN 3.1 Installation

Guide.

Upgrading with LiveLAN 2.0 installed

• Start with this upgrade guide for instructions about replacing the TCP/IP stack.

• Refer to the LiveLAN 3.1 Installation Guide for instructions about installing the LiveLAN Multimedia

Accelerator (codec) board and the LiveLAN 3.1 software.

• Return to this upgrade guide for instructions about reattaching your LiveLAN 2.0 peripherals to the

LiveLAN Multimedia Accelerator board.

Upgrading without having LiveLAN 2.0 installed

• Start with the LiveLAN 3.1 Installation Guide for instructions about installing the LiveLAN Multimedia

Accelerator board and the LiveLAN 3.1 software.

• Return to this upgrade guide for instructions about attaching your LiveLAN 2.0 peripherals to the

LiveLAN Multimedia Accelerator board.

Upgrade Summary

Review this summary of upgrade steps before proceeding. They provide an overview of the upgrade path you

need to follow for each scenario.

Upgrading with LiveLAN 2.0 installed

If LiveLAN 2.0 is installed on your PC:

• Replace the FTP Software OnNet TCP/IP stack with the Microsoft TCP/IP stack

• Install the LiveLAN Multimedia Accelerator (codec) board

• Install the LiveLAN 3.1 software

• Reconnect your camera, speakers, and microphone to the LiveLAN Multimedia Accelerator board.

You can also deinstall the Logitech MovieMan software and board if you choose; the instructions are included

in this guide.

Upgrading without LiveLAN 2.0 installed

If you purchased LiveLAN 2.0, but did not install it:

• Install the LiveLAN Multimedia Accelerator board

• Install the LiveLAN 3.1 software

• Attach the camera, microphone, and speakers (included in your LiveLAN 2.0 kit) to the LiveLAN

Multimedia Accelerator board.

Package Contents

In addition to these upgrade instructions, make sure your LiveLAN 3.1 upgrade kit contains the following

items:

• LiveLAN 3.1 CD-ROM (includes software, online installation and product guides, and online release

notes)

• LiveLAN Media Accelerator Board (the “codec” board)

• Video camera adapter cable

• LiveLAN 3.1 Hardware Installation Guide

System Requirements

To run LiveLAN 3.1 on your PC, your PC must meet the following system requirements:

Note: It is recommended, but not required, that LiveLAN 3.1 be used in conjunction with LiveManager 3.1.

Category Requirement

Processor

A Pentium, Pentium Pro, or Pentium II single processor or equivalent

running at 133-MHz or faster.

PCI Slot

One available PCI bus slot for the PictureTel LiveLAN Media

Accelerator Board.

Hard Disk Space

30 MB of available hard disk space for installation.

RAM 32 MB - 256 KB of cache

Operating

System Microsoft Windows 95 or Windows 98 operating system.

Monitor An SVGA monitor.

Graphics Board

A 32-bit PCI graphics board with 16-bit high color depth and a

minimum of 2-MB of video memory.

Note: Boards with 2D video acceleration and fast video memory, such

as VRAM, are recommended). LiveLAN works best using DirectDraw

and any DirectDraw compatible hardware and driver. For a list of

specific DirectDraw cards that have been tested by PictureTel with

LiveLAN 3.1, refer to the LiveLAN Release Notes and the LiveLAN 3.1

Installation Guide.

Network

Interface Card

(NIC)

A Network Interface Card is required running the Microsoft TCP/IP

stack (Winsock 1.1 or greater).

TCP/IP Protocol

Stack

A WinSock 1.1-compliant TCP/IP protocol stack that supports

Microsoft-specific extensions. (This is the standard TCP/IP stack

delivered with Windows 95.)

If virtual memory is not enabled on your PC, you will not be able to install LiveLAN. To enable virtual

memory on your PC, go to the Windows Control Panel and click the System icon. Choose the Performance tab

and click the Virtual Memory button at the bottom of the tab window. Make sure that the Let Windows manage

my virtual memory settings radio button on the Virtual Memory Dialog box is selected.

For power requirements for the LiveLAN 3.1 Media Accelerator board, refer to Appendix B of the PictureTel

LiveLAN 3.1 Installation Guide.

Replacing the TCP/IP Stack

LiveLAN 3.1 runs on any WinSock 1.1-compliant stack that supports Microsoft-specific extensions. The

LiveLAN 2.0 software required the FTP Software OnNet16 TCP/IP stack, which does not support Microsoft-

specific extensions. You need to replace the TCP/IP stack when you upgrade to version 3.1.

The following list identifies the major steps associated with replacing the TCP/IP Stack:

• Remove the FTP Software OnNet (V1.2, 2.0, or 2.1) TCP/IP stack.

• Add the Microsoft TCP/IP stack.

• Reinstall the FTP Software InterDrive NFS client (if required).

Recording Configuration Information

Before removing the FTP Software OnNet16 TCP/IP stack, you need to record configuration information for

use with the Microsoft TCP/IP stack.

Depending on which version of FTP OnNet software is installed on your PC and which version of Windows 95

is being used, the screen shots (illustrations) shown on the following pages may not match what is shown for

your version of OnNet. If this is the case, you may have to search for the configuration information on the

different tabs displayed within the FTP Software's TCP/IP Stack Properties window.

To record configuration information:

1. Click the Start button and choose Settings -> Control Panel.

2. Double-click the Network icon to display the Network Control Panel window.

3. Click the Configuration tab. The following screen is displayed.

4. Double-click the TCP/IP Stack. FTP Software, Inc. protocol entry. The TCP/IP Stack. FTP Software,

Inc. Properties screen that is displayed.

5. Record the following information:

oIP Address

oSubnet Mask

oRouter(s)

6. Click the Cancel button.

7. Click the Name Configuration tab on the TCP/IP Stack. FTP Software, Inc. Properties screen. The

following screen is displayed.

8. Record the following information:

oHost Name

oDomain Name

oName Server Address(es)

9. Click the Cancel button to return to the Network dialog box.

10. Double click the FTP Software NFS Client (InterDrive 95) entry if you have installed it.

11. Click the Servers Group tab and record the Hosts in the NFS Server Group.

12. Click the Cancel button to return to the Network dialog box.

13. If you have the FTP Software InterDrive NFS client installed, save the pctcp.ini file. The pctcp.ini

file is located in the pctcp install directory. This file contains license related information which is needed

when you reinstall the FTP InterDrive NFS client.

You can now remove the FTP TCP/IP stack as described in Removing the FTP TCP/IP Stack.

To reinstall the FTP InterDrive NFS client, follow the instructions in Reinstalling the InterDrive NFS Client.

Removing the FTP TCP/IP Stack

Follow these instructions to remove the FTP Software OnNet (V1.2, 2.0, or 2.1) TCP/IP stack:

1. Remove the FTP TCP/IP stack by selecting (highlighting) the TCP/IP Stack. FTP Software, Inc. entry

on the Configuration tab of the Network Control Panel Window, and click the Remove button.

2. Highlight the FTP Software NFS Client (InterDrive 95) entry, if installed, and click the Remove button.

3. Click the OK button. The Network dialog box closes automatically and the following dialog box appears

prompting you to restart your system now.

4. Click No. You must edit the autoexec.bat and win.ini files, and rename the winsock.dll file in your

OnNet directory before you restart your system. The procedures for editing and renaming these files are

provided below.

Editing the autoexec.bat and win.ini Files

1. Click the Start button and choose Run...

2. Type “sysedit” in the text entry field of the Run dialog box and click OK. The system displays the

System Configuration Editor window. All of the system’s autoexec.bat, config.sys, and win.ini

files are displayed as subwindows within the System Configuration Editor window.

Editing the autoexec.bat File

1. To edit the autoexec.bat file, select it by clicking on its Title Bar. The file’s window is highlighted

when it is selected. You may or may not have to edit this file. If the following line is in your

autoexec.bat file, then you will have to edit the file:

c:\pctcp\vxdinit.exe

If this line is not in the file, go to Editing the win.ini File.

2. Remove the line, “c:\pctcp\vxdinit.exe”, from your autoexec.bat file.

3. Save your changes and exit the autoexec.bat file. Click File and select Save from the menu bar.

Editing the win.ini File

1. To edit the win.ini file, click its Title Bar. The file’s window is highlighted when it is selected. You

may or may not have to edit this file. If the following load statement exists in your win.ini file, then

you will have to edit the file:

load=c:\mouse\xpoint.exe c:\pctcp\keyview\kwldmgr.exe

If this line is not in the file, go to Editing the winfile.ini File.

2. Remove (delete) the following information from the load= parameter statement:

“c:\pctcp\keyview\kwldmgr.exe”

After you remove this information from the load statement, it should now read as follows:

load=c:\mouse\xpoint.exe

3. Save your changes and exit the win.ini file.

4. Exit the System Configuration Editor window.

Editing the winfile.ini File (If you have one)

1. Click the Start button and choose Run...

2. Type winfile.ini in the text entry field of the Run dialog box. If you have a winfile.ini file, it is

opened up in the Microsoft Notepad text editor application.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere PictureTel Software Handbücher

PictureTel

PictureTel LIVE GATEWAY 3.1 Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung