4.1 Setup Working mode
The device You are able to setup the GPS data uploading intervals in the working mode setting. The standby
time of the battery is then reliant on which mode you select as follows:
1. Tracking every 30 seconds: Fast positioning mode and standby time is 8 hours.
2. Tracking every 10 minutes: Standard positioning and standby time is 48 hours.
3. Tracking every 1 hour: Power saving mode and standby time is over 72 hours.
4.2 Setup Admin number
The Admin number is essentially the main phone number for which you would like messages sent to eg
Mom’s phone number. To set up this number , select “Admin number” and input the admin phone number.
The device will then send notifications to this number. Notifications include low battery alarm, Geo-fence
alarm and removal alarm.
4.3 Setup Emergency number (Mom and Dad numbers)
Select “Emergency number” and input the Father & Mother’s phone number. After setting successfully,
when you press the watch’s Dad button, it will call Father’s number at once, likewise the Mom button will call
the Mother. When you long press the SOS button, it will begin to call Father’s number first. If father doesn’t
pcik up and it rings out it will then automatically ring the mother button.
4.4 Setup whitelist
You can nominate which phone numbers can phone the device by selecting the “Whitelist” button. You are
presented with 5 boxes where in you type the numbers you would like to have the ability to phone your
child’s PingMe. So only up to a maximum of 5 people can then phone your child’s PingMe.
4.5 Setup Phonebook
You can set up a Maximum of 10 contact numbers via the Phonebook feature which enables your PingMe
watch to be able to call one of these pre- selected numbers.
To access the phonebook on the watch, the user can press the “Mom button”on the PingMe . Use the fast
press on Mom or Dad button for selecting the number up and down, when the number has been chosen,
please long press the Mom button to initiate a call.
4.6 Setup Voice monitoring number
Select the “Voice Monitoring” function and it gives you a box in which to enter a phone number for which
you would like the phone to call. When you then select this function it will ping the watch silently , prompting
the watch to call you back. You answer the call on your smartphone and are then able to listen in on your
child’s surroundings, ensuring they are safe.
4.7 Setup Do Not Disturb
User can set up times for when you are not able to contact the phone ie such as when the child is in the
classroom at school. Just enter start time and the end time for the period in which you want to ensure the
child is not disturbed.
