Pipishell PISL2 Bedienungsanleitung
Installation Instructions V1.0
PISL2
Thank you for choosing our product! We strive to provide the best
quality and services for our customers. Would you kindly share your
experience on Amazon if you are satisfied? Should you have any
issues, please don't hesitate to contact us.
Telephone：800-556-9829 Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)
Supplied Parts
Tools Needed (Not lncluded)
Stud Finder Tape measure Pencil Drill
Wood Drill Concrete Drill socket wrench Screwdriver
Hammer
IMPORTANT SAFETY INFORMATION
•Check package contents against Supplied Parts and Hardware Lists to assure that all
components were received undamaged. Do not use damaged or defective parts.lf you
•Not all parts and hardware included will be used.
•Carefully read all instructions before attempting installation.If you do not understand
the instructions or have any concerns or questions, please contact customer service at
•This product may contain moving parts. Use with caution.
•Do not use this product for any purpose or in any configuration not explicitly specified
in this instruction. We hereby disclaim any liability for injury or damage arising from
incorrect assembly, incorrect mounting, or incorrect use of this product.
•DO NOT INSTALL INTO DRYWALL ALONE.
1
Wall Plate 01 x1 02 x2
level
TV Brackets
Supplied Hardware
Hardware for Attaching Wall Plate to Wall
Lag Bolts
M6X50
x4 x4
A1
These anchors are for concrete or
brick walls ONLY. DO NOT use them in
drywall or wood studs.
CAUTION!
A2
Wall Anchor
2
Hardware for Attaching TV Bracket to TV
x4 x4
TV Screws
M6X16mm M6X30mm
x4 x4
x4
M8 x 25mm
x4
10mm2.5mm
x4
5mm
05
03 04
M4
x4
M6
M8
M6
M4X16mm M4X30mm
x4 x4
M4
Washers
Spacers
3
Step 1 Select TV Screws
Step 2 Select Spacers (If Needed)
3
3
For Rounded TV
For Flat TV with:
Inset Holes Cable Interference
aLong Screw
Short Screw
Washer
Washer
Spacer
TV Bracket
TV Bracket
EXTRA
05
05
03
04
03
NO SPACER bSPACER
For Flat TV
Spacer not necessary
SPACE
Only one screw size fits your TV.
M6M4 M8
Too Short Too Long
● Avoid potential personal injury or property damage! DO NOT
over-tighten the lag bolts [A1]. Tighten the lag bolts [A1] only until they
are pulled firmly against the wall plate
[01]
.
Step 4
Step
4A
X
For wood stud installation, follow STEP 4A
For concrete installation, follow STEP 4B
Attach Wall Plate to Wall
Wood Stud Option
WARNING:
● Ensure the wall plate is securely fastened to the
wall before continuing on to the next step.
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm) minimum
1½ x 3½ in. (38 x 89 mm)
● Stud center must be verified
4
With Spacer
b
02
No Spacer
Alternate
Spacer
setups
a
05 05
03
03
04
Secure the TV Brackets to Your TV
Step 3
5
4A-2
4A-1
4A-4
Socket Wrench
Position the wall plate at
your desired height and
line up the holes with your
stud center line. Level the
wall plate and mark the
holes.
4A-3
ø4mm
50mm
Drill 4 pilot holes using a 4
mm diameter drill bit. Make
sure the depth is not less
than 50mm.
A1
Install the wall plate
[01]
using lag
bolts [A1] . Tighten the lag bolts
[A1] only until they are pulled
firmly against the wall plate.
Use a stud finder(not
included)to locate wood
studs. Mark the edge and
center locations.
● Avoid potential personal injury or property damage! DO NOT
over-tighten the lag bolts [A1]. Tighten the lag bolts [A1] only until they
are pulled firmly against the wall plate [01].
6
4B-1 4B-2
ø10mm
60mm
Position the wall plate at your
desired height, level the wall plate
and mark the pilot hole locations.
Step
4B
WARNING:
Wall
Anchor
A2
●
Ensure the wall plate is securely fastened to the wall
before continuing on to the next step.
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Mount the wall plate
[01]
directly onto the concrete surface
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
Solid Concrete or Concrete Block Option
Drill 4 pilot holes using a 10mm
diameter drill bit. Make sure the
depth is not less than 60mm. Never
drill into the mortar between blocks.
7
Step 5
4B-3
Use the hammer to
knock anchors [A2]
into the wall.
Hang the TV onto the Wall Plate
Wall
TV
Iocking
A1 A2
Install wall plate using lag bolts [A1] and anchors [A2]. Be
sure the anchors [A2] are seated flush with the concrete
surface. Tighten the lag bolts [A1] only until they are pulled
firmly against the wall plate. DO NOT over-tighten the lag
bolts [A1].
Inhaltsverzeichnis
Andere Pipishell TV-Halterung Handbücher
Pipishell
Pipishell PILFK Series Bedienungsanleitung
Pipishell
Pipishell PIMTK1 Bedienungsanleitung
Pipishell
Pipishell PIMF3 Bedienungsanleitung
Pipishell
Pipishell PISM02 Bedienungsanleitung
Pipishell
Pipishell PILTK4 Bedienungsanleitung
Pipishell
Pipishell PIMT4 Bedienungsanleitung
Pipishell
Pipishell PISF1 Bedienungsanleitung
Pipishell
Pipishell PIMFK1 Bedienungsanleitung
