PISCO SVA20 Series Bedienungsanleitung
Push-In Fitting Incorporated Type Manifold Solenoid Valve
Solenoid Valve SVA20 Series
●Lightweight and Large Capacity
●Various Valve Selections
●Effective Sectional Area 18mm
2
(Cv 0.97)
with valve width 16mm (5/8" )
http:/http://www./www.piscopisco.com
Solenoid Valve SVA20 Series
SOLENOID VALVE Series
■ Characteristics
●Easy maintenance by a single-screw mechanism.
●3 selections of wiring; Sub-D, Flat (Ribbon) Cable and Individual Plug-in
Connector
●
2 selections of connector lead-out direction: (Top and Side)
●
2 color selections: Black and Light Gray
●
Check Valve can be selected for each exhaust port for each to prevent
back pressure
●
2 actuators are operated independently and simultaneously by Twin
3-Way Solenoid Valve
Vacuum-Operable 2 / 3-Port Solenoid Valve
●Vacuum-Operable 2 / 3-Port Solenoid Valve which does not require an
external piping and has the same function as external pilot system.
●
Elimination of external piping thus allowing these valves to be mounted
along with other types of valves. This saves wiring, piping, and space.
●Selectable from single solenoid and double solenoid.
DIN Rail Mounting Bracket
●Easy and speedy attachment and detachment of DIN rail (width:
35mm).
●
Installing a valve manifold on a DIN rail firmly.
Dual Pressure Option
●Possible to control 2 different pressures in
one manifold.
■ Construction
● 2-Position, 5-Port, Single Solenoid Valve (SVA □ S)
JIS
5(R1)
3(R2)
4(A)
2(B)
12
14
1(P)
①
②
⑩⑦⑧⑨⑬③
④
⑤⑫
⑪
⑥
No. Part Material
1Fitting Ass'y
2 Manifold-block
Polyamide Base Plastic
3Pilot Valve Ass'y
4
Electric Component Ass'y
5 Valve Body PBT GF15%
6Check Valve Ass'y
7 Piston
Nickel-plated brass (Electroless Ni plating)
8 Spool Aluminum Alloy
9 Sleeve Aluminum Alloy
10 Slide Part POM GF25%
11 Fixing Bracket
Nickel-plated brass (Electroless Ni plating)
12 Spool Seal Rubber NBR
13
Push-Lock Manual Button
● 2-Position, 5-Port Double Solenoid Valve (SVA □ D)
JIS
5(R1)
3(R2)
4(A)
2(B)
12
14
1(P)
①
②
⑩⑦⑧⑨ ⑬ ③
④
⑤⑫
①
⑥
No. Part Material
1Fitting Ass'y
2 Manifold-block
Polyamide Base Plastic
3Pilot Valve Ass'y
4
Electric Component Ass'y
5 Valve Body PBT GF15%
6Check Valve Ass'y
7 Piston
Nickel-plated brass (Electroless Ni plating)
8 Spool Aluminum Alloy
9 Sleeve Aluminum Alloy
10 Slide Part POM GF25%
11 Fixing Bracket
Nickel-plated brass (Electroless Ni plating)
12 Spool Seal Rubber NBR
13
Push-Lock Manual Button
http:/http://www./www.piscopisco.com
Solenoid Valve SVA20 Series
SOLENOID VALVE Series
● 2 Position, 3-Port, Solenoid Valve (Twin 3-Way Valve)
JIS
A / B Port: Normally Open (SVA□F)
5(R1)
3(R2)
4(A)
2(B)
1(P)
A / B Port: Normally Closed (SVA□E)
5(R1)
3(R2)
4(A)
2(B)
1(P)
JIS
JIS
A Port: Normally Closed, B Port: Normally Open
5(R1)
3(R2)
4(A)
2(B)
1(P)
JIS
A Port: Normally Open, B Port: Normally Closed
5(R1)
3(R2)
4(A)
2(B)
12
14
12
14
12
14
12
14
1(P)
● 3-Position, 5-Port, Double Solenoid Valve
Pressure Center (SVA□P)
5(R1)
3(R2)
4(A)
2(B)
12
14
1(P)
JIS
Closed Center (SVA□A)
5(R1)
3(R2)
4(A)
2(B)
12
14
12
14
1(P)
JIS
Exhaust Center (SVA□R)
5(R1)
3(R2)
4(A)
2(B)
1(P)
JIS
● Vacuum-Operable 2/3 Port Solenoid Valve
2-Position, 2-Port, Single Solenoid Valve (SVA□T)
JIS
2(A)
12
12
12
12
10
10
10
10
1(B)
P
2-Position, 2-Port, Double Solenoid Valve (SVA□U)
JIS
2(A)1(B)
P
2-Position,3-Port, Double Solenoid Valve (SVA□W)
JIS
2(A)
1(B)
3(R)
P
2-Position, 3-Port Single Solenoid Valve (SVA□V)
JIS
2(A)
1(B)
P
3(R)
http:/http://www./www.piscopisco.com
Solenoid Valve SVA20 Series
SOLENOID VALVE Series
■ Model Designation of SVA20 Manifold Type(Example)
SVA 20
Resin Solenoid Valve
S
Intake Port Size
⑥
Exhaust Port Size
③ Output Port Size
Fitting Type Push-In Fitting (mm) Push-In Fitting (inch)
Code 1C 6C 8C1L 6L 8L1/4C 5/16C 1/4L 5/16L
Size (O.D.)
Combination
of Port Size
ø6 ø8
Combination
of Port Size
ø6 ø8
Piping
direction
Side To p Side To p
⑥ Exhaust Port Size
Fitting Type Push-In Fitting (mm)Push-In Fitting (inch)
Silencer (Open-air exhaust)
Code 8 0 25/16 3/8 1/2 S
Size (O.D.)ø8 ø10 ø12
ø1/2－
* The piping direction of Exhaust Port is the same direction as that of Intake Port.
08 A A08
20 Series (Valve width:
5/8" (
16mm
))
①
⑤
Exhaust Check Valve
① Number of Stations
Code 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19
No. of stations
2345678910 11 12 13 14 15 16 17 18 19
② Intake & Exhaust Block
A：Intake & Exhaust Block on Both Sides
B：Intake & Exhaust Block on One Side
④ Intake Port Size
Fitting Type Push-In Fitting (mm)
Push-In Fitting (inch)
Code 8C 0C 2C 8L 0L 2L
5/16C
3/8C 1/2C 5/16L 3/8L 1/2L
Size (O.D.)ø8 ø10 ø12 ø8 ø10 ø12
Piping
direction
Side To p Side To p
⑤ Exhaust Check Valve
No Code：without Check Valve
A□：with Check Valve
Code
A01 A02 A03 A04 A05 A06 A07 A08 A09 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19
Qty 12345678910 11 12 13 14 15 16 17 18 19
* Use the order format when ordering.
ø5/16 ø3/8
Max. 12 stations for Sub-D connector specifications
ø5/16 ø3/8 ø1/2ø5/16 ø3/8 ø1/2
ø5/16 ø5/16
ø1/4
ø1/4
3/8L
A08
1/4C
Output Port Size ④
Number of Stations ②
Intake & Exhaust Block ③
(Elbow fitting) (Elbow fitting)
(Elbow fitting)
(Elbow fitting)
⑩
Valve Coil Voltage
F W K
⑧
Color
⑨
Valve Type
⑨ Valve Type
Code Position
# of Port
Valve Function Code Position
#of Port
Valve Function
S2 5 Single Solenoid T2 2
Single Solenoid (available for vacuum system)
D2 5 Double Solenoid U2 2
Double Solenoid (available for vacuum system)
E2 3
4(A).2(B).Normally Closed (Twin 3-Way Valve)
V2 3
Single Solenoid (available for vacuum system)
F2 3
4(A).2(B).Normally Open (Twin 3-Way Valve)
W2 3
Double Solenoid (available for vacuum system)
G2 3
4(A).Normally Closed, 2(B).Normally Open
KCombination of Valves
H2 3
4(A).Normally Open, 2(B).Normally Closed
BBlock Plate
Closed Center MManifold-base Only
R3 5 Exhaust Center
P3 5 Pressure Center
D24
⑩
⑫
DIN Rail Mounting Bracket
⑪
Dual Pressure Option
⑦
Wiring Type
⑦ Wiring Type
D：Sub-D Connector
S：Individual Plug-in Connector
F：Flat (Ribbon) Cable Connector
⑧ Color
B：Black
W：Light Gray
⑫ DIN Rail Mounting Bracket
No Code：Without Bracket
D：With Bracket ( 1 set (2pcs) is equipped.)
MC
⑬Common Input
No Code：Positive common
MC：Negative common
⑬Common Polarity Specification
Negative common, MC is selectable when coil voltage is 24VDC
3 5
A
Valve Coil Voltage
D24：DC24V
100：AC100V
Dual Pressure Option
No Code：Single Pressure
P：Dual Pressure (*)
Please specify where on the manifold to mount using the order form. (Refer to the code example)
For the manifold type with Dual Pressure, Intake & Exhaust Block “A” (Intake & Exhaust Block on
Both Sides) is only selectable.
⑪
⑩
Solenoid Valve SVA20 Series
■ Model Designation of Mounting Unit (Example)
SVA 20
Resin Solenoid Valve
20 Series (Valve width:
5/8"
(16mm))
②
Valve Coil Voltage
D BD24
②
④
Color
①
Valve Type
① Valve Type
Code Position
No. of Port
Valve Type Code Position
No. of Port
Valve Type
S2 5 Single Solenoid A3 5 Closed Center
D2 5 Double Solenoid R3 5 Exhaust Center
E2 3
4(A).2(B).Normally Closed (Twin 3-Way Valve)
P3 5 Pressure Center
F2 3
4(A).2(B).Normally Open (Twin 3-Way Valve)
T2 2
Single Solenoid (available for vacuum system)
G2 3
4(A).Normally Closed, 2(B).Normally Open
U2 2
Double Solenoid (available for vacuum system)
H2 3
4(A).Normally Open, 2(B).Normally Closed
V2 3
Single Solenoid (available for vacuum system)
W2 3
Double Solenoid (available for vacuum system)
④ Color
B：Black
W：Ivory
② Valve Coil Voltage
D24：DC24V
100：AC100V
D
③
Wiring Type
③ Wiring Type
D：Concentrated wiring (Sub-D connector / Flat (Ribbon) Cable Connector)
S：Individual Plug-in Connector
■ Model Code of DIN Rail Mounting Bracket
DRF35S
DIN Rail Mounting Bracket
MC
Common Input
⑤
Negative common, MC is selectable when coil voltage is 24VDC
⑤Common Polarity Specification
No Code：Positive common
MC：Negative common
■ Code Example
Model Series
Number of
Stations
①
Intake /Exh.
Block config.
②
Output
Port Size
③
Intake
Port Size
④
Exhaust
Check Valve
⑤
Exhaust
Port Size
⑥
Wiring
Type
⑦
Color
⑧
Valve
Type
⑨
Coil
Voltage
⑩
Dual Pressure
Option
⑪
DIN Rail
Bracket
⑫
SVA 20 0
8
A 1C 3/8C A0
3
S F B K D24 P D
Station Number
Output Port Size
Exhaust Check Valve
Valve Type
Dual Pressure Option
St 1 1/4 SVA20 S
St 2 SVA20 S
St 3 6SVA20 S
St 4 6SVA20 WO
St 5
5/16
SVA 20 W
St 6 ASVA 20 D
St 7 8 A SVA 20 D
St.8 8 A SVA 20 D
St.1 St.2 St.3 St.8
※.Station Number is counted
St.1, St.2, St.3 …St.8 from
left side with the tube
fittings at the front as
shown in the figure.
http:/http://www./www.piscopisco.com
Common
Input
⑬
MC
1/4
5/16
Solenoid Valve SVA20 Series
SOLENOID VALVE Series
Order Form: SVA 20 Series
To: PISCO USA, Inc.
From :
Name :
Order # :
Date :
Requested EX-W PISCO Date : Quantity :
Series
Number of
Stations
① ②
Output
Port Size
③
Intake
Port Size
④
Exhaust
Check Valve
⑤
Exhaust
Port Size
⑥
Wiring
Type
⑦
Color
⑧
Valve
Type
⑨
Coil
Voltage
⑩
Dual Pressure
Option
⑪
DIN Rail
Bracket
⑫
SVA 20
Station No.
Output Port Size
Exhaust Check Valve
Valve Type
Dual Pressure Option
St 1 SV
St 2 SV
St 3 SV
St 4 SV
St 5 SV
St 6 SV
St 7 SV
St.8 SV
St.9 SV
St.10 SV
St.11 SV
St.12 SV
St.13 SV
St.14 SV
St.15 SV
St.16 SV
St.17 SV
St.18 SV
St.19 SV
St.20 SV
*
Write a circle for Dual Pressure Option to indicate the border where the air pressure is separated.
※ Make a copy of this page and use it for ordering.
Model
Input
⑬
Common
Intake /Exh.
Block config.
Dieses Handbuch passt für folgende Modelle
26
Inhaltsverzeichnis
Andere PISCO Steuereinheit Handbücher
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
