Pisector P09 series Bedienungsanleitung

LAN + WiFi + Cellular

Smart Alarm System

User Manual

We provide a more secure home life experience.

P15

P16

●Introduction

●Important Notesfor Users

●About Safety

●Requirements

●System Status & User Authorities

●The Outlook

●Quick Setting Up

●Operating by App

●FAQ

●Specifications

Table of Contents

Introduction

• Thank you for purchasing the Pisector®Smart Alarm System. Pisectorwill give you a complete control over your home's security and home

automation via your smartphone, tablets or web clients. This manual will guide you through the setup procedures and highlight some

key features.

• The system could be operated via smartphones, tablets or web clients.

• Please note that all contents listed here might be slightly different from the contents of the package or in App. Please check http://www.

Pisector.com to obtain the latest version of the user manual.

• Version: V1.0 EU-ENG

Important Notes for Users

• Please connect the power cable before first using.

• All sensors and devices in the package have already been paired with the main box before shipping. Users can start using the whole system

after setting the network. For the extra accessories (like sensors or smart devices), you need to pair them with the system for working

normally.

• We make this system easy to set and use. Mostusers can finish all process within 15 minutes. If there is any problem with the settings,

please stop and contact the [email protected] or sellerfor help.

• All manuals, nameplates and stickers with QR codes or barcodes, should be carefully kept for further use.

About Safety

• This system does not offer any guarantee of protection against burglary, robbery, theft, or any type of emergency. It is a DIY product and does

not come with a traditional monitoring service. However, most of the risks have been considered in our design to make your home safer.

• The users should continue to act prudently to protect the security of their lives and property. Any alarm system is subject to compromise or

failure for a variety of reasons as follows：

- An intruder may gain access through unprotected openings.

- An intruder may have the technical sophistication to bypass a sensor or the whole system.

- Signals sent by the main box or sensors may be blocked or reflected before being received, and a block can occur if metal objects are moved

into the path of the signal.

- Motion sensors can only detect the intrusion within the specified ranges and unobstructed areas.

- Malfunction of routers, limited services by wireless phone carriers or internet service providers, limited service such as text messages or push

notification provided by smartphone makers.

- Component failures or some other errors happen in the electrical system.

Requirements

• Wired/Wireless Router compatible with Wi-Fi IEEE 802.11 b/g/n standard.

• Internet Service Provider

• Mobile Telephone SIM card (only GSM/WCDMA/LTE SIM card, not CDMA one)

• iPhone or Android smartphone

- iOS version 7.0 or higher

- Android version 4.3 or higher.

System Status & User Authorities

• The Pisector system does not support any wired sensors. The main box communicates with all sensors via wireless RF signal protocols.

• Most of the sensors have low-battery warning mechanism., Users would receive notifications before the battery runs out.

• The system can change its security status according to the commands given by users or the signals sent from the triggered sensors.

- ARM:

All working sensors can be

triggered. The system will gen-

erate an alarm when receiving

the trigger signal sent from

sensors.

- DISARM:

This mode will de-activate all

sensors. This mode will also

turn oﬀ the siren and stop the

alarm process.

- HOME ARM:

This mode will allow some

selected sensors to keep

working while others are

deactivated. These sensors

could be selected in App.

- SOS:

This mode will trigger built-in

siren and send alarm messages

to emergency contacts. It also

triggers external sirens or other

sensors like smart plugs.

- Life-related sensors like Smoke Detector or CO Sensor will keep working all the time.

• There are three levels of user authorities.

- ADMINISTRATOR:

Who can fully control the system and

invite other users with assigned levels.

- USER:

Who can operate ARM/DISARM/HOME

ARM/SOS and control the smart plugs

and cameras, also can invite other

people as USER or GUEST.

- GUEST:

Who can only operate

ARM / DISARM / HOME ARM / SOS.

5V2A Power Adapter

RJ45 100M Ethernet SIM Slot

Louver

• Top View

LED Indicator

STATUS LED MEANING

Normal Status Light ON ARM/DISARM/HOME ARM/SOS Etc.

Setting Status Fast Blinking

Networking Configure

Reseting

Updating

Errors Slow Blinking

Low Battery

Networking Errors

Other Errors

The Outlook

• Front View

Wall Mounting Bracket

Battery Cover

Networking Configure

Power Switch

System Reset

• Back View

Quick Setting Up

• Install the Latest App

- Please search Pisector® P09 in App Store or Google Play, or scan the QR code printed on the package to visit the download page directly.

• Prepare the Internet Networking

- Please ensure the router you are using has already been connected to the Internet with DHCP mode enabled. Pisector supports IPV4

protocol only.

- The system supports the following networking type：

- LAN: 10/100M Ethernet.

- WiFi: 2.4GHz, WEP/WPA/WPA2 encrypted.

• Put the Main Box to a Suitable Place

- If you are using WiFi connection for the box, try your phonefirst to see if it could be connect to that WiFi around the installing location,

to ensure the WiFi signal can be received by the main box.

• Install the SIM Card (Optional)

Note: 1. SIM card, SIM card adapter are not included in this package. it is optional, user can purchase from cell signal provider such asT-Mobile.

2. Please check your local cell reception at www.cellreception. com make sure you have good signal with T-Mobile before you purchase a SIM. Card.

• Power ON

- Connect the power cable.

- Turn ON the power switch.

- Wait a few seconds until the LED indicator on the front cover light up brightly.

1. Please use the Mini-SIM card (Standard-SIM card) for the alarm system.

Card adapter is required when using nano or micro SIM card.

Standard SIM

card adapter

Nano-SIM Micro-SIM

2. Insert the SIM Card (as per the correct direction same as picture) and push it in.

SIM IN SIM OFF

*Push it First

Placsic

Metal

Standard SIM Card

Micro SIM Card

Nano SIM Card

• Setting Networking

- Hold the Networking Setting Button in the

battery cover until the LED indicator starts

flashing.

Launch the App - [Add a new device]:

- [Quick Setup], following the guideline to

finish the networking process. (for first time

to set up system add a new main base).

- [By scanning QR Code] ( for share system

from other people).

- [Scan QR Code saved on your phone

album] ( for share system from other people).

• Check Setting

- Make sure your mobile phone has been connected to the Internet via cellular or WiFi.

- Try pressing ARM/DISARM button in App, to see if the status icon in App would be changed immediately.

- Try using remote control, pressing ARM / DISARM button to see if the status icon in App would be changed immediately.

• Finishing & Mounting

- Put the battery cover back.

- Place your main box on the desktop or using the bracket to mount it on the wall.

Inhaltsverzeichnis

Andere Pisector Sicherheitssystem Handbücher

Pisector

Pisector GSM-06 Bedienungsanleitung

Pisector

Pisector GSM-01 Bedienungsanleitung

Pisector

Pisector GS08 Bedienungsanleitung

Pisector

Pisector PS03 Bedienungsanleitung

Pisector

Pisector GSM-01 Bedienungsanleitung

Pisector

Pisector GS08 Bedienungsanleitung

Pisector

Pisector PS03 Bedienungsanleitung

Pisector

Pisector Motion sensor Bedienungsanleitung

Pisector

Pisector GS08 Bedienungsanleitung

Pisector

Pisector GSM-03 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung