Pitco RP-14 Leitfaden

There'sAlwaysSomethingCooking!

SERVICESECTION

Service, Parts, and Schematics

For Reversible Pump Filter Systems

Covering Models

RP-14 & RP-18

Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 • 509 Route 3A, Bow, NH 03304

(800) 258-3708 • (603) 225-6684 • FAX (603) 225-8497



MTS # PF28-04 Pitco Frialator #L20-091-02 Original Rev. Date 12/27/93

Table of Contents (Service) ............................................................................................................. i

List of Tables and Figures ............................................................................................................... ii

Chapter 4: Service ....................................................................................................................4-1

4.1 REPLACEMENT PROCEDURES.......................................................................... 4-1

4.1.1 Pump/MotorRemoval .......................................................................................... 4-1

4.2 TROUBLESHOOTING FILTER SYSTEMS .........................................................4-2

Chapter 5: Parts .................................................................................................................5-1

ALPHABETICAL PART LIST ...............................................................................5-5

NUMERICAL PART LIST ...................................................................................... 5-7

Chapter 6: Schematics..............................................................................................................6-1

Table of Contents

Section Title Page

List of Tables and Figures

Figure Title Page

5-1 ReviersiblePumpFilterSystem ................................................................................. 5-4

Table No. Title Page

5-1 ReversiblePumpFilter System .................................................................................. 5-1

4-1

Chapter 4: Service

Thischapter providesthequalified technicianwith thereplacement andtroubleshootingprocedures

necessary to service the Pitco filter system.

4.1 REPLACEMENT PROCEDURES

These procedures are provided to the qualified technician as a guide to removal and replacement of

variousfiltersystemcomponents. Ifatestisrequiredtoverifycomponentoperationafterinstallation,

it will be referenced.

4.1.1 Pump/Motor Removal

1. Remove the screws to the motor cover. (10 total)

2. Remove the cover from the unit.

3. Loosen both unions on each side of the pump head.

4. Remove the hex nuts and washers from the motor base (4 total).

5. Cut and remove the white electrical tape that holds the heat tape to the pump head. (Heater

Option Only)

6. Remove the orange heat tape wrapped around the pump head. (Heater Option Only)

7. Remove the motor electrical door at the rear of the motor.

8. Remove all wirenuts leading to the motor.

9. Remove valve handle by removing the nut on the valve.

10. The pump/motor can be removed by raising the pump/motor straight up over the studs and

twisting out.

11. Replace by reversing above procedures.

4-2

4.2 TROUBLESHOOTING FILTER SYSTEMS

If the filter has had power removed for more

than 2 hours, it may take the heater 10-12

minutes to turn the Ready light on after power is

restored. If the light does not come on call

authorized service and parts distributor.

NO YES

YES

Does the

Ready light come

on? (Heater

Option Only)

Reverse flow to clear

nozzle.

YES

Is the filter nozzle

screen clogged?

YESNO

Connect hose.

Is filter

hose completely

connected?

YES

Oil pumping

slowly from fryer

to filter?

Allow the motor to

cool, reset the

thermal overload on

the motor.

YES

Is filter

motor overload

tripped

YES

Is the

filter plugged

in?

YES

Connect pickup tube.

Is filter

pickup attached

correctly?

Filter unit is not

working properly.

YES

Is oil

flowing from filter

to fryer?

Plug in the

filter.

Turn the filter power switch

off. Correct the cause for

tripping and reset the circuit

breaker.

YES

Is the filter

circuit breaker

tripped?

YES

Is the

pump

running?

Check the

building

circuit

breaker

YES

Open Valve.

Is valve

handle in the fully

open position?

Is the

filter plugged

in?

Plug in the

filter.

Call authorized

service and parts

distributor.

Clean the screen or

replace filter media.

YES

Is filter paper,

or pickup screens

clogged?

4-3

Does the filter

motor trip the

overload?

Open valve, then

turn on the pump.

YES

YES Is valve open?

Does the filter

circuit breaker keep

tripping?

If filter unit is still not

working correctly call

authorized service and

parts distributor.

Scrape the filter layer down to the metal

scraping screen. Once the pan is empty,

tighten the pick up tube nut against the

sediment screen. Inspect the filter paper for

tears and change if torn.

YES

Does the

filter leave

excessive oil in

the filter pan?

Solid shortenin

could be blockin

the

pump discharge lines. Wait until the

Ready light is on before turning the

pump switch ON. Ensure that the

filter hose is free of solid shortening

and debris.

(Heater Option Only)

Open valve, then

turn on the pump.

YES

Is valve open?

Solid shortenin

could be blockin

the

pump discharge lines. Wait until the

Ready light is on before turning the

pump switch ON. Ensure that the

filter hose is free of solid shortening

and debris.

(Heater Option Only)

4-4

5-1

Chapter 5: Parts

Thischaptercontainslistingsofthecomponentsusedinthedifferentmodelsoffiltersystems. These

components are listed in two places, with the illustration and in ordered listings. The illustrations

in this chapter are provided to show relative location of components located in the fryer. The filter

systemyouhavemaynotbeillustratedinthischapter,butthepartlocationsshouldbethesame. With

each illustration there is a table of components in numerical order by illustration number. The

illustration has numbered lines pointing to components which are listed in the table.

At the end of this chapter there are alphabetical and numerical listings of all parts used in the filter

systems. Thealphabeticalpartlistisarrangedinalphabeticalorderaccordingtothepartname. Each

partnamealsohasthePitcoFrialatorpartnumber. ThenumericallistisinPitcoFrialatorpartnumber

order. A brief description of each component is provided for each part.

5-2

Table 5-1 Reversible Pump Filter System

Item Pitco Frialator Quantity

Number Part Number Description Per Unit

1 B7402601 Filter Carriage Frame #14 1

B7402701 Filter Carriage Frame #18 1

1A P5045160 Cap, Plastic 1

1B P6071062 Caster, PMF 2 (W/Top Plate) 2

2 B6602405 Filter, Hose Hi-Pressure 60" 1

3 B6624701 Filter, Nozzle Weldment RP14,RP18 1

4 P6071190 Handle, Nozzle Rack 1

5 P0095200 Nut, Hex (Jam) 3/8-16 1

6 B6604501 Filter, Connector Quick 1

7 B6624801 Filter, Screen Inlet 1

8 PP10820 Ring, Retaining-Internal 1

9 B6627101 Filter, Plate Motor Weldment RP14 1

10 B6625501 Filter, Motor PC Assy, 115 VAC RP14, RP18 1

10A PP10101 Pump/Motor, 1/3 HP, 115/230VAC, 50/60Hz 1

10B P6071757 Valve, Ball 1/2", 3-Way 1

* 10C A6688402 Filter, Bracket, T-Stat, RP14,RP18 1

10D A6689002 Filter, Bracket Switch, Micro RP14,RP18 1

* 11 PP10039 Heater, Tape 165W, 110 VAC, 1/2" x 79" 1

12 B6625801 Filter, Cover Motor Weldment, RP14,RP18 1

13 A6688102 Filter, Panel Front RP14,RP18 1

14 A6688202 Filter, Panel Rear RP14,RP18 1

15 B6627001 Filter, Handle Weldment, RP14,RP18 1

16 P7037752-1 Elbow, Street 3/8" 90° Plated 2

17 P6071123 Connector, Filter 3/8" Male 1

18 PP10113 Connector, Coupler-Valved 3/8" 2

19 P6071253 Filter, Handle, Snap Tite White 1

20 P0062100 Set Screw, 1/4-20 x 3/8" 2

21 P6071490 Plug, Hole 7/8" 1

22 PP10146 Connector, Strain Relief 1

23 PP10686 Screw, 6-32 x 1/4" 2

24 P0091100 Nut, Hex 6-32 4

25 A6657202 Filter, Bracket Electric Cord 1

26 PP10752 Screw, 10-32 x 1/2" 14

27 P0020600 Screw, 1/4-20 x 5/8" 4

28 PP10668 Nut Acorn 1/4-20 4

29 P0080650 Washer, Flat 1/4" 4

30 P0093300 Nut, Hex, 1/4-20 4

31 Call Factory Tubing, Teflon 5/8 ID x 11/16 OD Order By

Length

Revised 12/27/93

Andere Handbücher für RP-14

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pitco Wasserfiltersystem Handbücher

Pitco

Pitco RP-14 Montage- und Bedienungsanleitung

Beliebte Wasserfiltersystem Handbücher anderer Marken

Wisy

Wisy LineAir 100 Bedienungsanleitung

Schaffner

Schaffner Ecosine FN3446 Series Betriebsanleitung

Pentair

Pentair FLECK 4600 SXT Benutzerhandbuch

H2O International

H2O International H20-500 Bedienungsanleitung

Renkforce

Renkforce 2306241 Bedienungsanleitung

Neo-Pure

Neo-Pure TL3-A502 Bedienungsanleitung

FLTR

FLTR OBF Bedienungsanleitung

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Bedienungsanleitung

Applied Membranes

Applied Membranes W-G844EM Bedienungsanleitung

BEGA

BEGA 116 Bedienungsanleitung

WATA

WATA Standard Bedienungsanleitung

Price

Price FFU series Handbuch

Gaggenau

Gaggenau BRITA INTENZA 467873 Bedienungsanleitung

Brita

Brita SAFF-100 Bedienungsanleitung

HEISSNER

HEISSNER FPU24000-00 Bedienungsanleitung

BGS technic

BGS technic 1518 Bedienungsanleitung

Reverse Osmosis

Reverse Osmosis RF Series Bedienungsanleitung

ubbink

ubbink Filtramax Series Bedienungsanleitung