Page 2 For technical questions, please call 1-888-866-5797. 60536
SAFETY OPERATION MAINTENANCEASSEMBLY
SAFETY OPERATION MAINTENANCESETUP
Table of Contents
Safety ......................................................... 2
Setup .......................................................... 3
Operating Instructions ................................ 4
Maintenance............................................... 5
Parts List and Diagram............................... 6
Warranty ..................................................... 8
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INFORMATION
Failure to heed these warnings may result in personal injury and/or property damage:
1. Study, understand, and follow all instructions
before operating this device.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.
3. Inspect before every use; do not use
if parts are loose or damaged.
4. Secure load with appropriate restraint device.
5. No alterations shall be made to this product.
6. Stay alert. Watch what you are doing, and use
common sense when operating a Lift. Do not use
Lift while tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while
operating lifts may result in serious personal injury
7. Before use, read manufacturer’s instruction
manual for the ATV or motorcycle being lifted.
8. When servicing the Vise, use only identical
replacement parts - refer to attached, product-
specific parts lists and diagrams. Follow instructions
in the “Maintenance and Servicing” section of this
manual. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of injury.
9. Maintain labels and nameplates on the Vise. These
carry important information. If unreadable or missing,
contact Harbor Freight Tools for a replacement.
10. The warnings, precautions, and instructions
discussed in this manual cannot cover all
possible conditions and situations that may occur.
The operator must understand that common sense
and caution are factors, which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
Specifications
Maximum Tire Width 170mm
