Pittsburgh 58808 Montageanleitung

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

58808

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back

of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep

this manual and the receipt in a safe and dry place for future reference. 22j

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 58808

Specifications

Power Requirement 12 Volts DC

Volume 118 dB

IMPORTANT SAFETY INFORMATION

1. Install a 15 amp fuse (not included) inline on the

power supply wire of this item. Using no fuse, or

using an incorrect fuse can cause an electrical fire.

2. Install only according to these instructions.

Improper installation can create hazards.

3. Wear ANSI-approved safety goggles and

heavy-duty work gloves during installation.

4. Do not install while engine is running. Remove

ignition keys from vehicle and set parking brake.

5. When drilling holes, beware of any hidden electrical

lines or cables. Make sure you don’t damage or

weaken the structural integrity of the vehicle.

6. Do not use as a replacement for Original

Equipment Manufacturer (OEM) horn(s).

7. Do not install this product in a location that will

exceed 212°F or get submerged in water. It may

stop operating if exposed to any of those conditions.

8. Keep assembly area clean and well lit.

9. Keep bystanders out of the area during installation.

10. Do not expose Horns to rain or wet

conditions. Water entering the Horns will

increase the risk of electric shock.

11. Do not install when tired or when under the

influence of alcohol, drugs or medication.

12. Do not install this product yourself unless you

are technically competent to do so. If necessary,

have a qualified technician install the Horns.

13. This product is not a toy. Do not allow

children to play with or near this item.

14. Use as intended only.

15. Inspect before every use; do not use

if parts are loose or damaged.

16. Exposure to noise levels over 85 dB is hazardous

to hearing. Everyone close enough to horn to be

exposed to more than 85 dB must wear ANSI-

approved hearing protection. Do not use Horn

in close proximity to people or animals, as the

decibel level may cause hearing damage.

17. Check and comply with local standards

for noise pollution levels before use.

18. Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

19. The warnings and precautions discussed in this

manual cannot cover all possible conditions and

situations that may occur. It must be understood

by the operator that common sense and caution

are factors which cannot be built into this

product, but must be supplied by the operator.

Installation Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document

including all text under subheadings therein before set up or use of this product.

Risk of serious personal injury. Turn the vehicle off and disconnect battery before installation.

Note: If unsure about any aspect of installation, have the Horns installed by a qualified mechanic.

1. Prior to installation, turn off the ignition,

shift transmission into park (for automatic

transmissions) or reverse (for manual). Remove

ignition keys from vehicle and allow engine

to cool. Place wheel chocks on both sides of

at least two wheels. Disconnect the vehicle’s

battery. Make sure the engine and engine

compartment are cool before installation.

2. Select a suitable location to mount the Horns.

Location must shelter Horns from incoming rain,

road water, and mud splash from under the

vehicle. Do not mount Horns near hot engine

components or where it may come into direct

contact with hot surfaces or moving parts.

Page 3For technical questions, please call 1-888-866-5797.Item 58808

Note: Holes may need to be drilled in the vehicle

chassis to mount the Horns, Air Compressor

and 12V Relay. Make sure no electrical wires

or cables or any other obstructions or vehicle

components are in the way of the drilling path.

3. Mount the Horns, Air Compressor and 12V Relay to

the vehicle’s chassis using the supplied Mounting

Brackets, Nuts and Bolts. Point the Horns forward

and slightly down for maximum efficiency.

4. Tighten Nuts to secure the Horns, Air Compressor

and 12V Relay to the mounting location.

5. Connect Air Tube to Air Compressor, 3-Way

Tube Adapter and then to both Horns.

6. Make connections to the Horns, Air Compressor

and 12V Relay as shown on the Wiring Diagram

using terminal connectors (not included) on all

connections. Pay attention to polarity. For negative

ground systems (most vehicles). For positive ground

systems, have a qualified mechanic install the horn.

Install a 15 amp fuse (not included) inline on

the power supply wire of this item. Using no

fuse, or using an incorrect fuse can cause an

electrical fire.

Battery

(not included)

15 A Fuse

Negative Ground Wiring Diagram

12V Relay

Air Compressor

Air Tube

3-Way Tube

Adapter

Parts List and Diagram

Part Description Qty

1 Air Compressor 1

2High-Tone Air Horn 1

3Low-Tone Air Horn 1

4 12V Relay 1

5Air Tube 1

6 Mounting Bracket 2

7 Nut 4

8 Bolt 4

9 Nut 1

10 Bolt 1

11 3-Way Tube Adapter 1

Record Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not available

individually as replacement parts. Specify UPC 193175446886 when ordering parts.

26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY

DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER

OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE

BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR

THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE

MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS

REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,

AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF

HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,

OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability

standards, and warrants to the original purchaser that this product is free from defects in materials

and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to

damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside

our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,

special or consequential damages arising from the use of our product. Some states do not allow the

exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion

may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges

prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.

If our inspection verifies the defect, we will either repair or replace the product at our election or we may

elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will

return repaired products at our expense, but if we determine there is no defect, or that the defect resulted

from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Inhaltsverzeichnis

Andere Pittsburgh Horn Handbücher

Pittsburgh

Pittsburgh 58807 Montageanleitung

Beliebte Horn Handbücher anderer Marken

Elk Products

Elk Products 45 Bedienungsanleitung

Valcom

Valcom V-1050C Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock DB3 Series Bedienungsanleitung

Altec Lansing

Altec Lansing 811B HF HORN Bedienungsanleitung

RF Elements

RF Elements UltraHorn CC Series Bedienungsanleitung

Edwards Signaling

Edwards Signaling 869DSTR-G1 Series Montageanleitung

Valcom

Valcom V-1030C Bedienungsanleitung

Valcom

Valcom VIP-130AL-SA Bedienungsanleitung

Electro-Voice

Electro-Voice HPT94 Bedienungsanleitung

Toa

Toa LE-M124 Bedienungsanleitung

EAW

EAW MR-102B Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR MH30 Bedienungsanleitung

Pequod

Pequod TWISTER 3.1 Bedienungsanleitung

United Pacific

United Pacific 46151 Bedienungsanleitung

Wolo

Wolo OCEAN ALERT 170 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8315B/4114B Bedienungsanleitung

Altec

Altec 151A PAGING HORN Bedienungsanleitung

aidapt

aidapt VM953 Programmierhandbuch