4
CHARGING THE BLUETOOTH® SPEAKER
Connect the micro USB port of the USB charging cable into the USB
port on the side of the speaker. Connect the other end of the USB
cable to your computer’s USB port or an USB wall charger (not
included)
The LED indicator turns RED, indicating the battery is being charged.
The LED indicator will turn off when the speaker is fully
charged. (Approximately 3 hours).
PAIRING THE SPEAKER WITHA BLUETOOTH®
ENABLED DEVICE
Keep your Bluetooth® Speaker and Bluetooth® enabled device within
1 meter of each other during the pairing process.
Turn on your Bluetooth® Speaker. The LED light on the front of the
speaker flashes. Your speaker is now in Pairing Mode.
Set your Bluetooth® enabled device to search for Bluetooth® devices.
When the device finds the YM-C06, select it. Select “Pair” to connect
the Bluetooth® Speaker to your bluetooth enabled device.
Depending on which device you are trying to connect the speaker to, it
may be necessary to enter a passcode. Enter passcode “0000” if
prompted by the device.
Your Bluetooth® enabled device will confirm that the pairing was
completed, and prompt you to accept the connection. Please respond
YES to connect the Bluetooth® Speaker to your Bluetooth® enabled
device.
Note : Once the speaker is paired and connected to your Bluetooth®
device, it will automatically connect the next time as long as the
Bluetooth® on your device is turned on.
