Planar Dome C3i Bedienungsanleitung

America Sales

Planar Systems, Inc.

1195 NW Compton Drive

Beaverton, OR 97006-1992 USA

phone + 1 (503) 748-1100

fax + 1 (503) 748-1493

Medical Sales

Planar Systems, Inc.

400 Fifth Avenue

Waltham, MA 02451-8738 USA

phone + 1 (781) 895-1155

fax + 1 (781) 895-1133

Europe & Asia-Pacific Sales

Planar Systems, Inc.

Olarinluoma 9, P. O. Box 46

FIN-02201 Espoo, Finland

phone + 358 9 420 01

fax + 358 9 420 0200

For more information

Download full versions of the Dome C3i Display and Dome CXtra guides and the

latest driver from the Planar web site.

Customer Support

•Visit www.planar.com

•E-mail [email protected]

•Call (866) PLANAR1

trademarks of Planar Systems, Inc.Technical information in this document is subject to change without notice.

020-0330-00A

Dome C3i Digital Flat-Panel Display

Dome DX2/PCI Display Controller

Dome CXtra Software

QUICK REFERENCE

Windows XP

Windows 2000

c3i-qs-ug-1a 3/29/04 9:41 PM Page a

Before You Begin

Check that your system meets these requirements and

runs one of these Microsoft operating systems.

Check the contents of your Dome C3i display package for all the items shown here.

Save the original packing materials for storage and shipping.

Unpacking the Display

System Requirements

•PCI slot per board

•50 MB hard disk space

•256 MB RAM

•CD-ROM drive

Operating System

•Windows XP

•Windows 2000

Warning

Avertissement

Avvertenza

Advertencia

Warnung

Wear an antistatic heel or

wrist strap when installing

the controller and display to

avoid damage to computer

components.

Guidelines

•Use both hands to lift

or adjust the display.

•Avoid touching the

display screen.

•Do not set up the display

in areas with sudden

temperature changes

and strong light sources.

•Do not block the vents on

the back of the display.

•Do not remove the back

cover or disassemble

the display.



凬

陸際



Dome C3i digital flat panel Dome DX2 display controller

DVI to DVI video cable Dome CXtra CD and

driver software

C3i power block

Dome C3i

quick reference

Power cord

Increasing the PCI Bus Performance

(PCICacheMode registry entry)

On systems with 64-bit PCI slots, use the DX2 driver to

enable write-combining for the DX2 display controller.

Enabling this function can improve video performance

on the board by 100% or more.The results: faster image

loads, increased window and level speed, and enhanced

system performance.

For more information, visit www.planar.com.

c3i-qs-ug-1a 3/29/04 9:41 PM Page 2

Turn your computer off. Leave the power cord

plugged into the grounded outlet.

To install the controller

1Turn off all peripherals. Disconnect all cables from

the back of your computer.

2Remove the computer cover.

3Remove the blank bracket from the

available PCI slot.

4Insert the display controller into the PCI slot,

align the connector pins, and press the

board down until it is firmly seated.

5Secure the mounting bracket.

6Reattach the computer cover and the peripherals.

When installing multiple DX2 display controllers,

install all boards before you install the driver.

Slide switch 1 on DIP switch S2 into the ON position to enable VGA mode. Enable VGA on

only one (1) DX2 display controller when you install multiple boards. Disable VGA on all DX2

display controllers if you are using a separate VGA card.

Setting the DIP Switch

DIP Switch S2 Enable VGA Disable VGA

1ONOFF

Installing the Display Controller

DX2 display

controller installed

Remove blank

bracket

Open 64-bit

PCI slot

c3i-qs-ug-1a 3/29/04 9:41 PM Page 4

Review these illustrations to identify display controls and ports.

Identifying the Components

Front Back

5 6 7

Legend

1Reset button

2LED lights

3DVI port to connect

the display to the

DX2 display controller

4DVI cable

5USB upstream port

6USB downstream port

7USB downstream port

8Power input port

9Power cord

Not to scale

c3i-qs-ug-1a 3/29/04 9:41 PM Page 6

8 9

Use only the cable and power cord supplied with

the Dome C3i display.

1Press the PUSH button on the desk stand

cover and remove the stand cover.

See page 9 for how to thread the cable

and cord on the desk stand.

2Plug one end of the DVI cable into

the DVI connector port. Tighten the

thumbscrews to secure the connection.

3Plug the power cord into the power

input port.

4Plug the other end of the DVI cable into

the video port on the installed display

controller. Use DVI port #1 if you are

installing only one display.

5Plug the other end of the power cord

into a grounded outlet.

6Reattach the stand cover.

7Power on your display first, then

the computer.

Connecting the DVI Cable and Power Cord

Power cord

Connection

for a single

display

DVI cable

DX2 display

controller installed

Threading the DVI Cable and Power Cord

To remove the stand cover,

press the PUSH button on the

desk stand (just above the

USB hub) and pull the stand

cover down and out to

remove it.

Thread the DVI cable and the

power cord through the back

of the stand. Make sure the

cable and cord are seated in

the notches.

To reattach the stand cover,

align the hooks with the slots

on the stand. Press the cover

into place. A click sound

signals a secure connection.

c3i-qs-ug-1a 3/29/04 9:41 PM Page 8

10 11

If necessary, remove the previously installed 63-WINDX driver before you install the

63-W2KDXPCI driver.

To remove the 63-WINDX driver

1Log on with administrator privileges.

2Insert the WINDX CD. Open the CD folder.

3Browse to the Win2k directory.

4Double-click Setup.exe.

5Select Remove to uninstall the driver.

6Restart the computer.

To install the 63-W2KDXPCI driver

1Log on with administrator privileges.The InstallShield Wizard reports new hardware.

2Click Cancel.You must run Setup.exe to install

the driver.

3Insert the W2KDXPCI CD. Open the CD folder.

4Double-click Setup.exe.

5Click Next to proceed through installation and start

copying files.

6Click Yes on the Digital Signature Not Found dialog

box for each display you install. (On Windows XP

systems, the Hardware Installation dialog box is

equivalent. Click Continue Anyway to proceed.)

7Select Yes, I want to restart my computer now,

and click Finish.

To enable the display

1Log on with administrator privileges.

2Right-click the desktop.

Select Properties > Settings.

3Select the display icon.

4Select Extend my Windows desktop onto this monitor. Click Apply.

5Click OK.

Installing the Display Driver on Windows XP/2000

c3i-qs-ug-1a 3/29/04 9:41 PM Page 10

12 13

1Log on with administrator privileges.

2Right-click the desktop. Select Properties > Settings.

3Select Default Monitor and Dome DX2/PCI Properties.

4Select Extend my Windows desktop onto this monitor.

5Select Advanced > Dome.

6Choose a resolution. Click Apply.

7Click OK until you return to the desktop.

C3i Display Resolutions and

Palette Options

Resolution Palette Option

1536 x 2048 Dynamic gray

2048 x 1536 Nonlinear gray

Static gray

Changing Display Properties on Windows XP/2000

LED A indicates the digital-link status between

the display controller and the interface.

LED B indicates the display-panel status; it

shows any faults currently in the panel.

For more information, refer to the Dome C3i

Display Reference Guide.

Interpreting LED Status Lights

c3i-qs-ug-1a 3/29/04 9:41 PM Page 12

1Unplug the power supply before

cleaning the display.

2Dampen a soft, clean cloth with

70% isopropyl alcohol.

3Wipe the screen gently with the

dampened cloth.

4Use a dry, soft, clean cloth to wipe

off the residue.

Always wipe off water and other stains

immediately to avoid damage to the screen.

Do not use or spray liquid,

aerosol, ammonia, or other

alcohol-based cleaners on

the display or screen.

Some chemical cleaners

may damage the display

and its case.

Do not touch the LCD screen

with your fingers. Skin oils

are hard to remove from

the screen.

Do not saturate the cleaning

cloth. Liquid that drips

on the glass may seep

into the display case.

Cleaning the LCD Screen

Through value-added services, the Dome CXtra monitoring and calibration software enhances

the functionality of Dome CX displays for viewing medical images in diagnostic settings.

All Dome CX displays ship with the CX Edition Base Package. The CX Edition Validation

Package is sold separately.

CX Edition Base Package

•Reporting service. Access service information, view events and history, and check events

related to error conditions.

•RightLight service. Check DICOM conformance and calibrate the display based on

the DICOM Grayscale Standard Display Function.

•Backlight Saver service. Schedule sleep for the display backlights.

•Privilege service. Limit users who can change display parameters.

CX Edition Validation Package

•AAPM TG18 Test service. Use recommendations from the American Association of

Physicists in Medicine,Task Group 18 to evaluate the display.

•DIN Acceptance Test service. Perform the German standard test for measuring

display performance.

•QuickSwitch service. Change the orientation of the software display.

•Test Patterns service.View test patterns that demonstrate the image quality of

the display.

•Enterprise Management service. Manage displays from a central location using

any SNMP console application.

Using Dome CXtra

c3i-qs-ug-1a 3/29/04 9:41 PM Page 14

Andere Handbücher für Dome C3i

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Planar Monitor Handbücher

Planar

Planar UltraRes L Series Bedienungsanleitung

Planar

Planar PL2210MW Bedienungsanleitung

Planar

Planar LC1200R Bedienungsanleitung

Planar

Planar Dome Q2 Bedienungs- und Wartungshandbuch

Planar

Planar PL150 Bedienungsanleitung

Planar

Planar Simplicity Series Bedienungsanleitung

Planar

Planar LA1500RTS Bedienungsanleitung

Planar

Planar TD3200 Bedienungsanleitung

Planar

Planar PT1710MX Bedienungsanleitung

Planar

Planar LC1502R SERIES Bedienungsanleitung

Planar

Planar PX2210MV Bedienungsanleitung

Planar

Planar PLL1920M Bedienungsanleitung

Planar

Planar WS231 Bedienungsanleitung

Planar

Planar PS5562 Bedienungsanleitung

Planar

Planar LC640.480.21-065 Bedienungsanleitung

Planar

Planar EP-Series Bedienungsanleitung

Planar

Planar PZN3410Q Bedienungsanleitung

Planar

Planar PL171M Bedienungsanleitung

Planar

Planar PS5074K-N Bedienungsanleitung

Planar

Planar UltraRes W Series Bedienungsanleitung

Planar

Planar LA1950R Bedienungsanleitung

Planar

Planar PS4661T Bedienungsanleitung

Planar

Planar PS4200 Bedienungsanleitung

Planar

Planar ICEBrite EL VGA Displays EL640.480-AM Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung