Planet WSG-500 Bedienungsanleitung

300Mbps Hotspot Wireless Subscriber Gateway

WSG-500

Quick Installation Guide

Table of Contents

1. Requirements .............................................................................................. 3

2. Package Contents ........................................................................................ 4

3. WSG-500 .................................................................................................... 5

4. Installation .................................................................................................. 7

5. Hardware Connection and Installation............................................................ 8

6. Conguration of Your WSG-500....................................................................10

1. Requirements

Cable modem or DSL/ADSL modem.l

Network cables.l

Use standard 10/100Base-TX network (UTP) cables with RJ45 connectors.l

Subscriber PC installed with Wireless adapter that complied with 802.11b,l

802.11g or 802.11n.

Workstations of subscribers running Windows 2000/XP, MAC OS9 or later.l

Linux, UNIX or other platform compatible with TCP/IP protocols.l

<Optional> Account generator (Model No.: WSG-ACG5).l

Hint

Mac platform should be OS9 or later in order to have DHCP client

support.

2. Package Contents

1 x WSG-500 unitl

1 x Power Adaptorl

1 x User’s Manual CDl

1 x Quick Installation Guidel

1 x RJ-45 Cablel

1 x RS-232l

2 x Antennal

1 x Ground Wirel

1 x Screw Packagel

3. WSG-500

Overview Top Panel

The top panel of PLANET WSG-500 is shown below.

Front Panel

The Front panel of PLANET WSG-500 is shown below.

LED Denition

LED Color Status LED Description

PWR

Blue Off

The device is turned off

The device is turned on

WAN Blue

Off

Flashing

The WAN is not connected.

The WAN has a successful (10/100Mbps)

Ethernet connection.

The WAN is sending or receiving packet.

LAN 1

LAN 2 Blue

Off

Flashing

The LAN is not connected.

The LAN has a successful (10/100Mbps)

Ethernet connection.

The LAN is sending or receiving packet.

WLAN Blue

Off

Flashing

The wireless is not ready.

The wireless is ready.

The wireless is sending or receiving packet.

INTERNET

Blue Off

The WAN is not connected to the internet.

The WAN is connected to the internet.

WES*

Blue

For indicating WES status during WES setup:

Master Slave

WES Start LED ashing

slowly LED ashing quickly

WES Negotiate LED ashing

slowly LED ashing quickly

WES Fail

(Negotiate

Timeout)

LED OFF LED OFF

WES Success LED ON for

over 5 seconds

LED ON for over 5

seconds (after Master

displays WES Success)

USB*

Blue N/A For future usage only.

Remark: WES is a future supported feature.

Port Indication

Power Reset WAN LAN 2 LAN 1 Console WES USB

Printed on

Housing 12V/1A Reset WAN (PoE) LAN2 LAN1 Console WES USB

Interface Power Button RJ-45 RJ-45 RJ-45 RS-232 Button USB

Power The power adaptor plugs here.

Reset Used for restarting the system.

WAN

(PoE)

One RJ-45 port is used for connecting xDSL or Cable Mode to the

Internet/Intranet.

LAN2 Used for Connecting to the public LAN. It can be chosen to require

authentication to access network resource and the Internet.

LAN1 Used for Connecting to the private LAN. Authentication is not

required to access the network resource from here.

Console Used for conguring the system via Hyper Terminal.

WES* Used for starting WES (WDS Easy Setup) process. For future usage.

USB* For future usage only.

4. Installation

The followings are instructions for setting up PLANET WSG-500. Refer to the

illustration and follow the simple steps below to quickly install your Wireless

Subscriber Gateway.

Connecting the Antennas

PLANET WSG-500 provides two antenna connectors on the rear of the unit for

wireless subscribers.

Installation Requirement

Before installing PLANET WSG-500, make sure your network meets the following

requirements.

System Requirements

PLANET WSG-500 requires one of the following types of software:

Windows 95/98/NT/2000/XPl

Any TCP/IP-enabled systems like Mac OS and UNIX (TCP/IP protocol installed)l

Standard phone line for xDSL modem or coaxial cable for Cable modem for l

Internet access

Web Browser Softwarel

(Microsoft I.E 4.0 or later version or Netscape Navigator 5.0 or later version)l

One computer with an installed 10Mbps, 100Mbps or 10/100Mbps Ethernet cardl

UTP network Cable with a RJ-45 connector (Package contents)l

Hint

Mac platform should be OS9 or later in order to have DHCP client

support.

5. Hardware Connection and Installation

Physical Installation

Internet

Public Zone

Private Zone

WSG-500

Mobile Guests

Administration

Laptop

PoE Switch

ADSL/Cable

Modem

Smart Phone

Laptop

Administrator

Clerk

Smart Pad

100Base-TX UTP

PoE

100Base-TX UTP with PoE

Telephone wire

2.4GHz 802.11n

N N

PoE

Ticket

Generator Printer

Physical connection of WSG-500

1. Ensure the WSG-500 and the Cable/DSL modem are powered OFF before

commencing. Leave your Cable/DSL modem connected to its wall socket (phone

line or cable input).

2. Use Ethernet cables to connect to the LAN2 port on the front panel. Connect

the other end of the Ethernet cable to an AP or Switch. (Note: Authentication is

required for the clients to access the network via LAN2 port. The LAN port with

authentication function is referred to as Public LAN).

3. Use Ethernet cables to connect to the LAN1 port on the front panel. Connect the

other end of the Ethernet cable to a PC. (Note: Authentication is NOT required

for the clients to access the network via LAN1 port. The LAN port with authenti-

cation function is referred to as Private LAN).

4. Connect your Cable/DSL Modem to the WAN port on the front panel. Use the

cable supplied with your Cable/DSL modem. If no cable was supplied with your

modem, use a standard network cable. Please make sure the connection is

established (LED is on).

5. Connect the Power Adapter. Use only the unit provided.

6. Power ON. The PWR LED should stay on (If your network is connected, the

WAN/WLAN/LAN LED will be on, too).

7. Power on the PC that connected to the WSG-500.

Hint

1. Please consult your ISP personnel to obtain proper Internet

connection related information, and input carefully.

2. If Internet connection cannot be established, please check the

WAN LED display, inserted parameters or contact the ISP service

staff for support information.

3. Account Generator WSG-ACG5 is an optional device.

4. It is recommended that you leave IP settings on subscriber PC

as automatically assigned. By machine default configurations,

WSG-500 will act as a DHCP server, and it will assign PC the

necessary IP settings.

6. Conguration of Your WSG-500

Getting Started

The WSG-500 supports web-based conguration. After completing the hardware

installation, WSG-500 can be congured through a PC by using web browser.

To access the web management interface, connect the PC and WSG-500 in advance

via the Private Port of WSG-500. Then, launch the web browser and enter the IP

address of the gateway for that port in the address eld then press Enter. Default

IP address of the default gateway of the Private Port is https://192.168.1.254

(Note: https is used for a secured connection).

The administrator login page will appear. Enter default username “admin” & default

password “admin” in the User Name and Password elds. Click Enter to login.

After logging into WSG-500 successfully, a web management interface with a

welcome message will appear.

Click Setup Wizard to help you complete the conguration.

Setup Wizard

Step 1: General

Enter a new password for the admin account and retype it in the verify pass-

word eld (Twenty characters maximum and no spaces allowed).

Andere Handbücher für WSG-500

Inhaltsverzeichnis

Andere Planet Tor Handbücher

Planet

Planet WPG-130N Bedienungsanleitung

Planet

Planet SKD-200 Bedienungsanleitung

Planet

Planet VGW-804 Bedienungsanleitung

Planet

Planet VIP-110 Installationshandbuch

Planet

Planet WPG-120 Bedienungsanleitung

Planet

Planet VIP-281 Series Bedienungsanleitung

Planet

Planet VIP-281 SW Bedienungsanleitung

Planet

Planet MH-2001 Bedienungsanleitung

Planet

Planet IG-100 Bedienungsanleitung

Planet

Planet ICG-2515-NR Series Bedienungsanleitung

Planet

Planet MH-1000 Bedienungsanleitung

Planet

Planet BM-525 Bedienungsanleitung

Planet

Planet VIP-880 Series Bedienungsanleitung

Planet

Planet ICG-2420-LTE Bedienungsanleitung

Planet

Planet IMG-110T Bedienungsanleitung

Planet

Planet WIPG-300H Bedienungsanleitung

Planet

Planet VIP-2100 Bedienungsanleitung

Planet

Planet VIP-110 Bedienungsanleitung

Planet

Planet BM-500 Bedienungsanleitung

Planet

Planet VIP-410 Bedienungsanleitung

Planet

Planet MH-2300 Bedienungsanleitung

Planet

Planet WPG-120 Bedienungsanleitung

Planet

Planet UMG-1000 Bedienungsanleitung

Planet

Planet IMG-2100T Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung