Planet IGS-824UPT Bedienungsanleitung

Industrial 4-Port 10/100/1000BASE-T 802.3bt PoE + 2-Port

10/100/1000T + 2-Port 100/1000X SFP Ethernet Switch

IGS-824UPT

User's Manual

Table of Contents

1. Package Contents................................................................................. 3

2. ProductSpecications ........................................................................... 4

3. Hardware Introduction .......................................................................... 6

3.1 Switch Front Panel......................................................................... 6

3.2 LED Indicators............................................................................... 7

3.3 Switch Upper Panel........................................................................ 9

3.4 Wiring the Power Inputs................................................................. 9

3.5 Wiring the Fault Alarm Contact ..................................................... 11

3.6 Grounding the Device................................................................... 11

4. Installation ........................................................................................ 12

4.1 DIN-rail Mounting Installation ....................................................... 12

4.2 Wall-mount Plate Mounting ........................................................... 13

Customer Support.................................................................................... 14

1. Package Contents

Thank you for purchasing PLANET IGS-824UPT Industrial 8-Port Gigabit

Ethernet Switch with 4-Port PoE++. The interfaces of this model are shown

below:

Model Name 10/100/1000T RJ45 Port 100/1000X SFP Slot PoE Port

IGS-824UPT 6 2 4

In the following section, the term “Industrial PoE++ Switch” means the

IGS-824UPT.

Open the box of the Industrial PoE++ Switch and carefully unpack it. The box

should contain the following items:

Industrial PoE++ Switch x 1 User’s Manual x 1 DIN-rail Kit x 1

Wall-mount Kit x 1 RJ45 Dust Cap x 6 SFP Dust Cap x 2

If any of these are missing or damaged, please contact your dealer

immediately.

2.ProductSpecications

Model IGS-824UPT

HardwareSpecications

Copper Ports 6 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

SFP Slots 2 1000BASE-SX/LX/BX SFP interfaces

Compatible with 100BASE-FX SFP

Connector

Removable 6-pin terminal block

Pin 1/2 for Power 1

Pin 3/4 for fault alarm

Pin 5/6 for Power 2

Alarm One relay output for power failure.

Alarm relay current carry ability: 1A@DC 24V

Power Requirements

48~54V DC, 5A (max.)

Redundant power with reverse polarity protection

function

Power Consumption Max. 3.24 watt/11.06 BTU (Idle)

Max. 250 watt/853.04 BTU (Full load)

Dimensions

(W x D x H) 55 x 85 x 135 mm

Weight 777g

Enclosure IP30 aluminum case

Installation DIN-rail kit and wall-mount kit

ESD Protection 6KV

SwitchSpecications

Switch Architecture Store-and-Forward

Switch Fabric 16Gbps

Throughput

(packet per second) 11.9Mpps@64bytes

Address Table 4K entries

BuerMemory 4Mbitson-chipbuermemory

Jumbo Frame 9K bytes

Flow Control Back pressure for half duplex

IEEE 802.3x pause frame for full duplex

Power over Ethernet

PoE Standard IEEE 802.3bt PoE++ type 4 PSE

Backward compatible with IEEE 802.3at PoE+ PSE

PoE Power Supply Type

802.3bt

Legacy/Force

End-span/Mid-span

PoE Power Output

Max. 95 watts to 802.3bt PoE++ PD

Max. 95 watts to Legacy/Force PD

Max. 36 watts to 802.3at PoE+ PD

Power Pin Assignment

End-span: 1/2(-), 3/6(+)

Mid-span: 4/5(+), 7/8(-)

802.3bt/PoH: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

PoE Power Budget 240 watts maximum@52-54V DC input

160 watts maximum@48-51V DC input

Standard Conformance

Regulatory Compliance FCC Part 15 Class A, CE

Stability Testing

IEC 60068-2-32 (free fall)

IEC 60068-2-27 (shock)

IEC 60068-2-6 (vibration)

Standards Compliance

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3az Gigabit SX/LX

IEEE 802.3x Full-Duplex Flow Control

IEEE802.3azEnergyEcientEthernet (EEE)

IEEE 802.3bt Power over Ethernet Plus Plus

IEEE 802.3at Power over Ethernet Plus PSE

IEEE 802.1p Class of Service

Environment

Temperature Operating: -40~75 degrees C

Storage: -40~75 degrees C

Humidity Operating: 5~90% (non-condensing)

Storage: 5~90% (non-condensing)

3. Hardware Introduction

3.1 Switch Front Panel

IGS-824UPT

802.3bt PoE++

P1 P2 Alarm

80W 160W 240W

PoE

Usage

ACTLNK

PoE-in-Use

1000 LNK/ACT

10/100 LNK/ACT

Legacy

Standard

OFF

PoE Mode

DIPON

1. PoE Mode Switch

Standard Mode: Fully conforms to the IEEE

802.3af/at/bt standard.

Legacy Mode: Identify and power non-

standard PD devices.

2. Gigabit Ethernet PoE++ Interfaces

802.3bt PoE++ 10/100/1000BASE-T

copper, RJ45 twisted-pair: Up to 100

meters.

3. Gigabit Ethernet TP Interfaces

10/100/1000BASE-T copper, RJ45 twisted-

pair: Up to 100 meters.

4. 100/1000BASE-X SFP Slot

The SFP slots built in the IGS-824UPT

supports SFP auto-detection and dual

speed as it features 1000BASE-SX/LX/

BX and 100BASE-FX SFP (small form-

factor pluggable) fiber-optic modules.

The distance can be extended from 550

meters to 2 kilometers (multi-mode fiber)

and 10/20/40/60/80/120 kilometers

(single-mode fiber or WDM fiber).

Figure 1: IGS-824UPT

Front View

Details of PoE Mode

PoE Mode Description

Standard

(Default)

The Standard mode is to provide power to the PD device that

follows the IEEE 802.3af/at/bt standard.

Legacy The Legacy mode supports Ultra PoE. It is to provide power to the

PD devices that do not fully follow the IEEE 802.3af/at/bt standard.

The IGS-824UPT also supports Force Power Mode in the Legacy

mode. If the output power of IGS-824UPT in the Legacy Mode is

less than 1 watt for 20 seconds, the Force Mode will be enabled

for 2 seconds. If the loading is still less than 1 watt, the Legacy

Mode will be enabled again.

The IGS-824UPT in the Force Mode will also provide a maximum

95-watt power to the PD. TO PREVENT THE DEVICES FROM

DAMAGE, please make sure the remote devices supports either

the Legacy or Force Mode before turning the DIP switch to the

Legacy Mode.

Only adjust the DIP switch to the desired mode before

powering on the IGS-824UPT. Power off first before changing

mode.

3.2 LED Indicators

 System

LED Color Function

P1 Green Lights to indicate power 1 has power.

P2 Green Lights to indicate power 2 has power.

Alarm Red Lights to indicate either power 1 or power 2 has no power.

 PoE Power Usage (Unit: Watt)

LED Color Function

80W Amber

Blinks to indicate that the PoE usage is around 40W to

79W.

Lights to indicate the PoE usage is around/over 80W.

160W Amber

Blinks to indicate that the PoE usage is around 120W to

159W.

Lights to indicate the PoE usage is around/over 160W.

240W Amber

Blinks to indicate that the PoE usage is around 200W to

239W.

Lights to indicate the PoE usage is at the maximum.

 Per 802.3bt PoE++ 10/100/1000BASE-T Interface (Port 1 to Port 4)

LED Color Function

LNK/ACT Green

Lights to indicate the link through that port is

successfully established at 10Mbps or 100Mbps or

1000Mbps.

Blinks to indicate that the Switch is actively sending or

receiving data over that port.

PoE-in-Use Amber

Lights to indicate the port is providing DC in-line

power.

O to indicate the connected device is not a PoE

powered device (PD).

 Per 10/100/1000BASE-T Interface (Port 5 and Port 6)

LED Color Function

1000

LNK/ACT Green

Lights to indicate the port is successfully established at

1000Mbps.

Blinks to indicate that the Switch is actively sending or

receiving data over that port.

10/100

LNK/ACT Amber

Lights to indicate the port is successfully established at

100Mbps or 10Mbps.

Blinks to indicate that the Switch is actively sending or

receiving data over that port.

 Per 1000BASE-X SFP Slot (Port 7 and Port 8)

LED Color Function

1000

LNK/ACT Green

Lights to indicate the port is successfully established at

1000Mbps.

Blinks to indicate that the Switch is actively sending or

receiving data over that port.

100

LNK/ACT Amber

Lights to indicate the port is successfully established at

100Mbps

Blinks to indicate that the Switch is actively sending or

receiving data over that port.

3.3 Switch Upper Panel

The upper panel of the Industrial PoE++ Switch consists of one terminal block

connector within two DC power inputs.

Figure 3-2 shows the upper panel of the Industrial PoE++ Switch.

DC Input:

48-54V , 5A max.

PWR1 PWR2

Alarm

Max. Fault Alarm loading: 24V, 1A

1 2 3 4 5 6

Figure 3-2: Industrial PoE++ Switch Upper Panel

3.4 Wiring the Power Inputs

The 6-contact terminal block connector on the top panel of Industrial PoE++

Switch is used for two DC redundant power inputs. Please follow the steps

below to insert the power wire.

Caution

When performing any of the procedures like inserting the wires

or tightening the wire-clamp screws, make sure the power is

OFF to prevent from getting an electric shock.

1. The DC power input range is 48V ~ 54V DC. Please insert positive and

negative DC power wires into contacts 1 and 2 for POWER 1, or 5 and 6 for

POWER 2.

DC Input:

48-54V , 5A max.

PWR1 PWR2

Alarm

Max. Fault Alarm loading: 24V, 1A

1 2 3 4 5 6

Figure 3-3: Industrial PoE++ Switch DC Input

DC Input Max. PoE Budget

48~51V 160W

52V~54V 240W

Note

1. To avoid damage, please use the Industrial PoE++ Switch

accordingtoitsspecications.

2. Please follow the table above for DC input in relation with

maximum PoE budget.

2. Tighten the wire-clamp screws for preventing the wires from loosening.

123456

Power 1 Alarm Power 2

+ - + -

Note

The wire gauge for the terminal block should be in the range

between 12 and 24 AWG.

PWR1 and PWR2 must provide exactly the same DC voltage

for power load balance while operating with dual power input.

Inhaltsverzeichnis

Andere Planet Schalten Handbücher

Planet

Planet IKVM-8020 Bedienungsanleitung

Planet

Planet IFGS-1022HPT Bedienungsanleitung

Planet

Planet WGSW-28040 Montageanleitung

Planet

Planet GSD-804P Bedienungsanleitung

Planet

Planet MGSW-004 Bedienungsanleitung

Planet

Planet FSD-1604 Bedienungsanleitung

Planet

Planet FSD-808P Bedienungsanleitung

Planet

Planet GSW-4804SF Bedienungsanleitung

Planet

Planet NOVASwitch GSW-1200S Bedienungsanleitung

Planet

Planet FSD-504HP Bedienungsanleitung

Planet

Planet ISW-808PT-M12 Bedienungsanleitung

Planet

Planet WGS-6325-8UP2X Bedienungsanleitung

Planet

Planet WGSW-2620HP Bedienungsanleitung

Planet

Planet FSD-Series Bedienungsanleitung

Planet

Planet FSD-504HP Bedienungsanleitung

Planet

Planet GSD-800S Bedienungsanleitung

Planet

Planet IGS-624HPT Bedienungsanleitung

Planet

Planet FSD-805S15 Bedienungsanleitung

Planet

Planet GSD-808HP Bedienungsanleitung

Planet

Planet KVM-800 Bedienungsanleitung

Planet

Planet WGSD-1020 Bedienungsanleitung

Planet

Planet IGS-6325-20T4C4X Bedienungsanleitung

Planet

Planet FNSW-2401CS Bedienungsanleitung

Planet

Planet FNSW-4800 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung