Planet XGS-6311 Series Bedienungsanleitung
Layer 3 Gigabit/10 Gigabit Managed Ethernet Switch
XGS-6311/GS-6311/MGS-6311 Series
Quick Installation Guide
Table of Contents
1. Package Contents................................................................................. 3
2. Switch Management ............................................................................. 5
3. Requirements....................................................................................... 6
4. Terminal Setup..................................................................................... 7
4.1 Logging on to the Console.............................................................. 8
4.2 ConguringIPAddress ................................................................... 8
4.3 Setting1000BASE-Xfor10GSFP+ Port ......................................... 10
4.4 SavingtheConguration .............................................................. 10
5. Starting Web Management .................................................................. 11
5.1 LoggingintotheManagedSwitch................................................. 12
5.2 SavingCongurationviatheWeb.................................................. 13
6. RecoveringBacktoDefaultConguration ............................................. 14
7. Customer Support .............................................................................. 15
3
1. Package Contents
Thank you for purchasing Layer 3 Gigabit/10 Gigabit Managed Ethernet
Switch, XGS-6311 series, MGS-6311 series or GS-6311 series. The
descriptionsofthesemodelsareasfollows:
Model Description
XGS-6311-12X Layer312-Port10GBASE-XSFP+Managed
EthernetSwitch
GS-6311-24T4X L324-Port10/100/1000T+4-Port10GSFP+
ManagedEthernetSwitch
GS-6311-16S8C4XR
L316-Port100/1000XSFP+8-PortGigabitTP/
SFP+4-Port10GSFP+ManagedEthernetSwitch
with36-72VDCRedundantPower
GS-6311-48T6X L348-Port10/100/1000T+6-Port10GSFP+
ManagedEthernetSwitch
GS-6311-24HP4X L38-Port802.3btPoE+16-Port802.3atPoE+
4-Port10GSFP+ManagedEthernetSwitch
GS-6311-48P6X L348-Port10/100/1000T802.3atPoE+6-Port
10GSFP+ManagedEthernetSwitch
MGS-6311-10T2X L38-Port2.5GBASE-T+2-Port10GBASE-T+
2-Port10GBASE-XSFP+ManagedEthernetSwitch
MGS-6311-8P2X
L38-Port2.5GBASE-T802.3atPoE+2-Port
10GBASE-T+2-Port10GBASE-XSFP+Managed
EthernetSwitch
Unless specied, “Managed Ethernet Switch” mentioned in this Quick
Installation Guide refers to the XGS-6311 series, MGS-6311 series or GS-6311
series.
4
OpentheboxoftheManaged Switchandcarefullyunpackit.Theboxshould
containthefollowingitems:
Item
Model
Quick
Installation
Guide
Sheet
DB9 to
RJ45
Console
Cable
Rack-
mount
Accessory
Kit
SFP
Dust
Cap
AC
Power
Cord
Rubber
Feet
XGS-6311-12X 12 1 4
GS-6311-24T4X 4 1 4
GS-6311-16S8C4XR 28 1 4
GS-6311-48T6X 6 1 4
GS-6311-24HP4X 4 1 4
GS-6311-48P6X 6 1 4
MGS-6311-10T2X 2 1 4
MGS-6311-8P2X 2 1 4
If any item is found missing or damaged, please contact your local reseller for
replacement.
5
2.Switch Management
TosetuptheManagedSwitch,theuserneedstoconguretheManagedSwitch
for network management. The Managed Switch provides two management
options:Out-of-Band ManagementandIn-Band Management.
Out-of-Band Management
Out-of-band management is the management through console interface.
Generally, the user will use out-of-band management for the initial
switch conguration,orwhenin-bandmanagementisnotavailable.
In-Band Management
In-band management refers to the management by logging in to the Managed
SwitchusingTelnet or HTTP,or usingSNMPmanagement softwaretocongure
the Managed Switch. In-band management enables the management of
the Managed Switch to attach some devices to the Switch. The following
proceduresarerequiredtoenablein-bandmanagement:
1. Log on to console
2.Assign/CongureIPaddress
3. Create a remote login account
4.EnableHTTPorTelnetserverontheManagedSwitch
In case in-band management fails due to Managed Switch conguration
changes, out-of-band management can be used for conguring and managing
theManagedSwitch.
The Managed Switch is shipped with VLAN1 interface IP
address 192.168.0.254/24 assigned by default. User can
assign another IP address to the Managed Switch via the
console interface to be able to remotely access the Managed
SwitchthroughTelnetorHTTP.
6
3. Requirements
zWorkstationsrunningWindowsXP/2003/Vista/2008/7/8/10/11, MACOSXor
later,Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
zSerial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
The above Workstations have been installed with terminal emulator, such
as Tera Term or PuTTY.
Serial cable -- one end is attached to the RS232 serial port, while the
otherendtotheconsoleportoftheManagedSwitch.
zEthernet Port Connection
Network cables -- Use standard network (UTP) cables with RJ45 connec-
tors.
TheabovePCisinstalledwithWebbrowser
It is recommended to use Google Chrome or above to access
the Managed Switch. If the Web interface of the Managed
Switch is not accessible, please turn off the anti-virus software
orfirewallandthentryitagain.
7
4. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer and to serial (console) port of the Managed Switch. The
console port of the Managed Switch is DCE already, so that you can connect
theconsoleportdirectlythroughPCwithouttheneedofNullModem.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1 Managed Switch Console Connectivity
A terminal program is required to make the software connection to the
Managed Switch. Tera Term program may be a good choice. The Tera Term
canbeaccessedfromtheStart menu.
1. Click START menu, then Programs,andthenTera Term.
2.When the followingscreenappears,makesurethatthe COM port should be
conguredas:
Baud:9600
Parity:None
Databits:8
Stopbits:1
Flowcontrol:None
Figure 4-2 Tera Term COM Port Conguration
8
4.1 Logging on to the Console
Once the terminal is connected to the device, power on the Managed Switch,
andtheterminalwilldisplay“running testing procedures”.
Then, the following message asks for the login user name and password. The
factory default user name and password are as follows as the login screen in
Figure4-3appears.
Username:admin
Password:admin
Figure 4-3 Managed Switch Console Login Screen
The user can now enter commands to manage the Switch. For a detailed
descriptionofthecommands,pleaserefertothefollowingchapters.
Forsecurityreason, please change and memorizethenewpass-
wordafterthisfirstsetup.
4.2 ConguringIPAddress
TheIPaddresscongurationcommandsfor VLAN1 interfacearelisted below.
Before using in-band management, the Managed Switch must be congured
with an IP address by out-of-band management (i.e. console mode). The
congurationcommandsareasfollows:
Switch# cong
Switch_cong#interface vlan 1
Switch_cong_v1#ip address 192.168.1.254 255.255.255.0
9
The previous command would apply the following settings for the Managed
Switch.
IPv4Address:192.168.1.254
SubnetMask:255.255.255.0
Figure 4-4 Conguring IPv4 Address Screen
To check the current IP address or modify a new IP address for the Managed
Switch,pleaseusetheproceduresasfollows:
Show the current IP address
1. On ”Switch#” prompt, enter “show ip interface brief”.
2.The screen displays the current IP address, subnet mask and gateway as
showninFigure4-5.
Figure 4-5 Showing IP Information Screen
10
If the IP is successfully congured, the Managed Switch will apply the new
IP address setting immediately. You can access the Web interface of Managed
SwitchthroughthenewIPaddress.
If you are not familiar with console command or the related
parameter, enter “help” anytime in console to get the help
description.
4.3 Setting1000BASE-Xfor10GSFP+Port
The Managed Switch supports both 1000BASE-X and 10GBASE-X SFP
transceivers by manual setting and the default SFP+ port speed is set in the
ber auto mode,sotheend-usercanplugthetransceiverdirectly.
In another example, the end-user has to force the ber connection with
1000BASE-X SFP transceiver in the ethernet 1/0/1. The following command
congurationisrequired:
Switch#cong
Switch(cong)#interface ethernet 1/0/1
Switch(cong-if-ethernet1/0/1)#media-type ber-1g
Figure 4-6 Setting 1000BASE-FX Screen
4.4 SavingtheConguration
In Managed Switch, the running conguration le stores in the RAM. In the
current version, the running conguration sequence running-cong can
be saved from the RAM to FLASH by write command, so that the running
conguration sequence becomes the start-up conguration le, which is called
congurationsave.
Switch#write
Conrmtooverwritecurrentstartup-congconguration[Y/N]:y
Writerunning-congtocurrentstartup-cong successful
Switch#%May2200:02:57.7302023Writecongurationsuccessfully!
Figure 4-7 Write Screen
Dieses Handbuch passt für folgende Modelle
10
Inhaltsverzeichnis
Andere Planet Schalten Handbücher
Planet
Planet GS-5220-16P2XV Bedienerhandbuch
Planet
Planet XGS-6350-48X2Q4C Bedienungsanleitung
Planet
Planet SGS-6341-24T4X Bedienungsanleitung
Planet
Planet MII Series Bedienungsanleitung
Planet
Planet FSD-808HP Bedienungsanleitung
Planet
Planet GSW-2404SF Bedienungsanleitung
Planet
Planet GS-4210-8UP2S Bedienungsanleitung
Planet
Planet WSW-2401A Bedienungsanleitung
Planet
Planet NOVASwitch GSW-800S Bedienungsanleitung
Planet
Planet GSD-805 Bedienungsanleitung
Planet
Planet GSD-808HP Bedienungsanleitung
Planet
Planet SOHOConnect DHD-801 Bedienungsanleitung
Planet
Planet GSD-802PS Bedienungsanleitung
Planet
Planet KVM-800 Bedienungsanleitung
Planet
Planet FSD-1603 Bedienungsanleitung
Planet
Planet IGS-20160HPT Bedienungsanleitung
Planet
Planet GS-5220-8UP2T2X Bedienungsanleitung
Planet
Planet HPOE-1200G Bedienungsanleitung
Planet
Planet GSD-800S Bedienungsanleitung
Planet
Planet FGSD-1022P Bedienungsanleitung
