Plantronics CS CS60 Bedienungsanleitung
User Guide
CS50-USB &
CS60-USB DECT™
WIRELESS
HEADSET SYSTEM
DIAGRAMS
HEADSET
2
7 6 1
5
3
4
FIG.1
FIG.2
FIG.3
11
12
10
8
9
14
15
1
13
16
17
18
FIG.2.1
POWER SUPPLY
BASE UNIT
DIAGRAMS
EARLOOP
FIG.3.1
HEADBAND Available as an accessory.
FIG.3.2
2
DIAGRAMS
NECKBAND Available only as an accessory.
FIG.3.3
3
DIAGRAMS
INSTALLING A REPLACEMENT BATTERY
LISTEN VOLUME ADJUST MUTE FEATURE
FIG.4.1
FIG.5
FIG.4.2
4
WELCOME
www.plantronics.com
Thank you for selecting the CS50-
USB/CS60-USB Wireless Headset
System from Plantronics.
The CS50-USB/CS60-USB offers
wireless, hands-free headset con-
venience and long range work-
space mobility.
This user guide provides instruc-
tions on the installation and usage
of your system.
For safety and regulatory informa-
tion, please refer to the separate
"Important Safety Information"
booklet. Detailed technical infor-
mation and a copy of the
Declaration
of Conformity can be found at
www.plantronics.com/
documentation
CS50-USB/CS60-USB
Wireless Headset
System User Guide.
5
USAGE INSTRUCTIONS
6
DIAGRAM KEY
HEADSET
1Microphone
2Speaker
3Talk Button
4Volume/Mute Control
5On-line Indicator
6Charge Contacts
7Battery Door
DESK CHARGER
8AC Power Adapter
9AC Power Adapter Port
10 Headset Docking Cradle
11 Charge Contacts
12 Status Indicator
13 Charge Indicator
14 Stand
15 Stand Pegs
16 Ringer Switch On/Off
17 USB Connector
18 Subscription button access hole
(paperclip required)
1. GETTING STARTED
To use your Plantronics CS50-USB/CS60-USB Headset System, please follow these
simple steps:
1. Install the hardware.
2. Install the software.
3. Charge your headset battery.
4. Choose your headset wearing style.
5. Carry out the initial set-up
INSTALLING THE CS50-USB/CS60-USB BASE UNIT
To install the base-unit, attach the stand by inserting the Stand Pegs into the locating
holes on the underside of the base unit. Connect to the USB connector shown in Fig.
2 on page 1 to a free USB port on your computer. A USB hub can be used but you
should ensure it can supply sufficient power (250mA) to charge the headset. This
will create the finished assembly (refer to Fig.3, page 1). Alternatively, the Velcro
strips included can be used to attach the base unit to a PC monitor. The optional AC
Power Adapter can be installed as shown in Fig. 2.1
7
INSTALLING THE PerSonoCall SOFTWARE
To install the software, insert the CD supplied with CS50-USB/CS60-USB. If the CD
does not autoplay, then use Windows Explorer to find the file called install.bat, double-
click on it and then follow the instructions on-screen.
CHARGE YOUR HEADSET BATTERY
To charge the headset battery, place the headset into the DOCKING CRADLE. During
To charge the headset battery, place the headset into the DOCKING CRADLE. During
charging the CHARGE indicator (13) will be illuminated. When the headset is fully
charged, the CHARGE indicator (13) will extinguish.
The headset must be charged for a minimum of 1 hour prior to use – 3 hours to fully
charge.
CHOOSE YOUR HEADSET WEARING STYLE
The CS50-USB/CS60-USB is provided with a choice of wearing styles. A neckband is
also available as an accessory. Refer to Fig. 3 on pages 2 and 3 for instructions on
how to connect and adjust your choice of wearing style.
INITIAL SET-UP
RINGER
The CS50-USB/CS60-USB includes a ringer in the base to ensure that if you are not
wearing the headset then you can still receive notification of an incoming call. The
feature is disabled when the Ringer switch (16) is in the up position (as shown) or
enabled when the switch is in the down position.
COMPUTER AUDIO & VOICE DEVICES
When the CS50-USB/CS60-USB is installed, it will set itself as the default voice device
in your computer. You can set your preferences manually in Windows ™ through the
Sounds and Audio Devices option in Control Panel.
SOFTPHONE
In addition to setting up the CS50-USB/CS60-USB through your computer operating
system, your softphone may require you to choose which audio device you wish to use
and carry out a short test to match this device to the softphone. It may also enable
you to choose which device indicates an incoming call. Please refer to your softphone
documentation to determine how to do this.
8
2. USING YOUR HEADSET
PERSONOCALL SOFTWARE
BASIC OPTIONS TAB
SELECT SOFTPHONES
Check the box or boxes of the softphones (installed during setup) you want the head-
set to work with. If you change the softphone you use, or add an additional one, then
you can change the softphones selectable by running “Install” again from the
PerSonoCall software CD.
LAUNCH PERSONOCALL WHENEVER WINDOWS™ STARTS
Check this box to automatically launch the PerSonoCall application whenever you start
your computer. PerSonoCall software must be activated to enable the remote ring
detection and answer/end capabilities with supported softphones.
ENABLE HEADSET ONLY FOR PHONE CALLS
Check this box to conserve headset battery power by turning off the headset radio
when no softphone call is active. The radio link is automatically re-activated when a
softphone call is activated. When this box is checked, your headset only functions for
phone calls. If you still want to use the headset to listen to audio files such as mp3,
you should not check this box.
SMART BUTTON
Check this box to launch the application of your choice by pressing the mute button for
longer than 2 seconds. Application executables to be launched can be selected via the
browse button. (For example… launch your softphone application)
CURRENT STATUS TAB
HEADSET STATUS
ATTACHED TO HEADSET
Headset detected in USB port.
USB FIRMWARE VERSION
Factory installed firmware revision. May be required for technical assistance.
BASE FIRMWARE VERSION
Factory installed firmware revision. May be required for technical assistance.
9
REMOTE FIRMWARE VERSION
Factory installed firmware revision. May be required for technical assistance.
HEADSET INDICATORS
RADIO LINK
Communication between base and headset when checked.
SMART BUTTON
Headset Smart (long press of Mute button) button has been pressed when checked.
TALK BUTTON
Headset talk button has been pressed when checked.
FLASH BUTTON
Headset Flash (long press of volume up or down button) button has been pressed
when checked.
MUTE BUTTON
Headset mute button has been selected when checked.
SOFTPHONE STATUS
AVAILABLE PHONE LINES
Shows the phone lines currently active from the softphone(s) selected at install or from
the basic options tab.
CALL STATUS
ACTIVE
Number of current active calls.
RINGING
Number current ringing calls.
ON HOLD
Number of current calls on hold.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Plantronics Headset Handbücher
Plantronics
Plantronics GameCom 777 Bedienungsanleitung
Plantronics
Plantronics DUOSET WITH FIREFLY Bedienungsanleitung
Plantronics
Plantronics VOYAGER 510 Bedienungsanleitung
Plantronics
Plantronics SAVI W440 - SAFETY BOOKLET Bedienungsanleitung
Plantronics
Plantronics DuoSet H141 Betriebsanleitung
Plantronics
Plantronics B230-M Bedienungsanleitung
Plantronics
Plantronics CS50 Bedienungsanleitung
Plantronics
Plantronics Voyager PRO UC Abmessungen
Plantronics
Plantronics CS70 Series Bedienungsanleitung
Plantronics
Plantronics Savi 430 Bedienungsanleitung
Plantronics
Plantronics CS530 Series Gebrauchsanweisung
Plantronics
Plantronics M214I Bedienungsanleitung
Plantronics
Plantronics PULSAR 260 Bedienungsanleitung
Plantronics
Plantronics Savi Office WO201 Bedienungsanleitung
Plantronics
Plantronics BLACKWIRE C420 START GUIDES Bedienungsanleitung
Plantronics
Plantronics EXPLORER 230 Bedienungsanleitung
Plantronics
Plantronics Blackwire 3300 Series Bedienungsanleitung
Plantronics
Plantronics CS510-XD Bedienungsanleitung
Plantronics
Plantronics Savi Office WO10 Bedienungsanleitung
Plantronics
Plantronics MX200 Bedienungsanleitung
