Plantronics Voyager PRO+ Bedienungsanleitung

LEARN

Voyager™PRO+ Bluetooth®Headset

TAKE A GOOD LOOK

CALL BUTTON

• Takeacallorendit (1 tap)

• Redial(2 taps)

• Initiatephone’svoice-dialing

(2-second press until tone heard)

• ReconnectlostBluetooth

connection(1 tap)

• Transferaudioto/fromheadset

(1-second press while on a call)

POWER BUTTON

• Onoroff(2-second press)

• Batterylevelvoicealerts(1 tap)

• Activatepairingafterinitialsetup

(press until LED ﬂashes red/blue)

MICRO USB CHARGING PORT

• WithACcharger:

90 minutes for full charge

• Fullychargebeforerstuse

• Bestperformancewhenfullycharged

VOLUME/MUTE BUTTONS

• Volume:up/down(tap + or – buttons per

level change)

• Muteduringacall:on/off(1-second press

of both + and – buttons)

• Musicoraudio:pause/play(1-second

press of both + and – buttons)

LED

• Charging(solid red)

• Batterystatus(1-6 hrs left = 1 red ﬂash,

low = 2 red ﬂashes, critically low = 3 red

ﬂashes)

• Missedcall(3 purple ﬂashes, repeats for

5 minutes or until canceled by tapping

Call button)

• Pairingmode(repeating blue/red ﬂashes)

• Multipoint (on = 2 blue ﬂashes, off =

1 blue ﬂash)

Besafe!Pleasereadthesafetyguidefor

importantsafety,charging,batteryand

regulatoryinformationbeforeusingyour

newheadset.

CONNECT TO YOUR PHONE

“Pairing” connects your

headset to your phone.

“Multipoint” lets you use

this headset with two phones.

Activate this feature before

pairing your second phone.

1. READY

Activate the Bluetooth feature on

your phone, then use the phone’s

settings to add/search/discover

new Bluetooth devices.

iPhone: Settings > General >

Bluetooth > On

(starts the search for devices)

BlackBerry®smartphone:

Settings/options >

Bluetooth: On >

Search for devices

2. SET

Firsttime:

With headset turned off, activate

Bluetooth pairing mode by pressing

the Power button. The LED ﬂashes

red/blue to indicate pairing mode.

Activatemultipoint:

While pressing the Call button, turn

on the headset and keep pressing

the Call button until LED ﬂashes

blue twice. (Repeat to deactivate.)

Pairingsecondphone/

reconnectingoriginal:

Start in “OFF” mode. Press and

hold the Power button until the

LED ﬂashes red/blue.

3. CONNECT

Select “VoyagerPRO+” from the

list of Bluetooth devices shown

on your phone.

If phone asks for a passcode, enter

four zeros (0000). You may see

**** on screen.

Some phones also ask to conﬁrm

headset connection after pairing.

Headset LED will stop ﬂashing red/

blue once your phone and headset

are successfully paired/connected.

MIX AND MATCH FOR BEST FIT

The headset comes with the medium eartip installed

but you can replace it with the optional small or large

eartip provided.

Removingtheeartip:

1. Grip the eartip and gently push it into the speaker

housing then rotate it a quarter turn to the left

to unlock.

2. Pull the eartip away from the headset.

Attachinganeweartip:

1. Align the tabs on the eartip with the slots on the

speaker housing.

2. Gently push the eartip into housing while turning

it a quarter turn to the right. The eartip will stop

rotating when it is locked.

You may want to add the foam eartip covers

for additional comfort.

Softgeleartips

(S,M,L)andfoam

eartipcovers

TRY IT ON

For the best sound clarity and comfort, make sure

you have a secure ﬁt.

Theover-and-intechnique:

1. Guide the earloop behind your ear and position

the headset so that the speaker and eartip rest

comfortably in your ear.

2. Pivot the boom up or down to point the microphones

toward the corner of your mouth.

Thequick-turnadjustment:

1. Pivot the boom into an upright position.

2. Rotate the boom and speaker to the other side of the

headset and lower it before ﬁtting the headset on your

other ear.

MORE ABOUT MULTIPOINT

Plantronics VoyagerPRO+ supports

multipoint technology, which allows

you to use one headset with two

different Bluetooth mobile phones.

To pair your headset to a second

phone, see “Connect to your phone”.

How to initiate a call

When multipoint is on, the headset

initiates or redials a call from

the phone that last made an

outgoing call.

To use the second paired phone

instead, make the call using the

controls on that phone. The

second phone activates its link

with the headset.

NOTE: The headset cannot place a

current call on hold while answering

a call from the second phone.

How to answer a call while talking

on the other paired phone

To answer a second call on the

other phone, the current call must

be terminated or transferred back

to the ﬁrst phone. To transfer the call,

see “Take a good look”.

If you choose not to answer, the

second call will go to voice mail.

Answeringanincomingcallfrom

thesecondphone,whilealreadyon

anothercall:

1. To answer the second call, end the

ﬁrst call by tapping the Call button.

2. Answer the second call by tapping

the Call button again.

TIP: To avoid issues with multipoint,

use the Call button on the headset

rather than your phone controls.

LISTEN TO THE VOICE

This headset announces various

status alerts when you power

on/off, run low on talk time, or

lose/reconnect the Bluetooth

connection to your phone.

WHAT YOU’LL HEAR WHEN YOU’LL HEAR IT

Poweron After pressing the Power button for 2 seconds

Poweroff After pressing the Power button for 2 seconds

Talktime:(6hrs,5hrs,4hrs,3hrs,

lessthan2hrs)

After powering the headset “on”

Batterylow When you have under 30 minutes left before the

battery must be recharged

Rechargeheadset When you have approximately 10 minutes left before the

battery must be recharged

Connected After turning the headset on or reconnecting a dropped

Bluetooth signal

Phone1connected After powering the headset to “on” or reconnecting a dropped

Bluetooth connection

Phone2connected After pairing a second phone using multipoint feature

Pairing While the headset and phone are trying to pair/connect

Pairingsuccessful After the headset and phone are successfully paired/connected

Pairingincomplete,restartheadset After the headset and phone tried to pair but failed

Muteon After pressing the Volume + and - buttons simultaneously

during a call

Muteoff When on mute, after pressing the Volume + and – buttons

simultaneously during a call

Lostconnection When the phone loses the Bluetooth connection with

the headset

Volumemaximum When the highest volume level is reached after tapping

Volume + button

Volumeminimum When the lowest volume level is reached after tapping

Volume – button

TIPS

Stream music and more:

Once your phone is connected, music

or audio ﬁles like GPS directions or

podcasts can be streamed through

the headset.

The headset supports A2DP when

connected to a device capable of

streaming A2DP audio.

PAUSE/PLAY: You can pause and play

music and audio ﬁles using controls

on the headset if your device also

supports Bluetooth AVRCP. Simply

press both volume +/- buttons

simultaneously until you hear a beep.

Use multipoint one call at a time:

You cannot place a current call on

hold while answering a call from the

second phone.

Tap the call button to end the ﬁrst

call and tap it again to take the

second call.

Check headset battery level

on an iPhone:

The battery level of your headset is

shown on-screen beside the phone’s

battery level icon.

Check the battery level:

The battery alert announces remaining

talk time after calls end.

In addition, you can tap the Power

button to check battery level.

Know how to reconnect:

Your headset tries to reconnect a lost

connection. If it can’t, then tap the call

button once or manually reconnect via

the phone’s Bluetooth device menu.

Stay near your phone:

Bluetooth has a working “range” of up

to 10 meters (33 feet) between the

phone and headset before audio

degrades and the connection is lost.

SPECIFICATIONS

Talktime Up to 6 hours talk time

Standbytime Up to 5 days standby

Operatingdistance(range) Up to 10 meters (33 feet) range

Headsetweight 17 grams

Chargeconnector Micro USB cable with micro USB connection and

AC/DC 100–240V

Batterytype Rechargeable, non-replaceable Lithum-ion polymer

Chargetime(maximum) 1.5 hours

Powerrequirements 5V DC - 180mA

Bluetoothversion Version 2.1 + Enhanced Data Rate (EDR), eSCO data

packet transfer, Secure Simple Pairing (SSP) if supported

by phone

Bluetoothproles Hands-free v1.5 (HFP), Headset v1.1 (HSP), Advanced

Audio Distribution (A2DP) and Audio/Video Remote

Control (AVRCP)

Operating,storageand

chargingtemperature

0 – 40°C (32°F – 104°F)

NEED MORE HELP?

Plantronics Ltd

Wootton Bassett, UK

Tel: 0800 410014

+44 (0)1793 842443*

Czech Republic

+44 (0)1793 842443*

Danmark

Tel: 80 88 46 10

Plantronics GmbH

Hürth, Deutschland

Kundenservice:

Deutschland 0800 9323 400

Österreich 0800 242 500

Schweiz 0800 932 340

Για περισσότερες

πληροφορίες:

+44 (0)1793 842443*

Plantronics Iberia, S.L.

Madrid, España

Tel: 902 41 51 91

Finland

Tel: 0800 117095

Plantronics Sarl

Noisy-le-Grand

France

Tel: 0800 945770

Plantronics BV

Regus House

Harcourt Centre

Harcourt Road

Dublin 2, Ireland

Service ROI: 1800 551 896

:רתאב רקב ,ףסונ עדימל

+44 (0)1793 842443*

További információk:

+44 (0)1793 842443*

Plantronics Acoustics

Italia Srl, Milano, Italia

Numero Verde: 800 950934

Plantronics B.V.

Hoofddorp, Nederland

NL 0800 7526876

BE 0800 39202

LUX 800 24870

Norge

Tel: 80011336

Aby uzyskać więcej informacji:

+44 (0)1793 842443*

Portugal

Tel: 0800 84 45 17

Pentru informaţii

+44 (0)1793 842443*

Дополнительная

информация:

+44 (0)1793 842443*

Sverige

Tel: 0200 21 46 81

Daha fazla bilgi için:

+44 (0)1793 842443*

ﬂ

*Support in English www.plantronics.com

Inhaltsverzeichnis

Andere Plantronics Headset Handbücher

Plantronics

Plantronics CS540 Series Installations- und Benutzerhandbuch

Plantronics

Plantronics MX500i Abmessungen

Plantronics

Plantronics Blackwire 3300 Series Bedienungsanleitung

Plantronics

Plantronics DISCOVER 610 Bedienungsanleitung

Plantronics

Plantronics BLUETOOTH HEADSET 220 SERIES Bedienungsanleitung

Plantronics

Plantronics Versa VS22M Bedienungsanleitung

Plantronics

Plantronics EXPLORER 240 - Bedienungsanleitung

Plantronics

Plantronics BLACKWIRE C210 Bedienungsanleitung

Plantronics

Plantronics CS70 Series Bedienungsanleitung

Plantronics

Plantronics RIG 4VR Bedienungsanleitung

Plantronics

Plantronics .Audio 920 Bedienungsanleitung

Plantronics

Plantronics Encore Bedienungsanleitung

Plantronics

Plantronics VOYAGER 520 Bedienungsanleitung

Plantronics

Plantronics MX203 Bedienungsanleitung

Plantronics

Plantronics CS70N Abmessungen

Plantronics

Plantronics Voyager 855 Bedienungsanleitung

Plantronics

Plantronics B230-M Bedienungsanleitung

Plantronics

Plantronics ML10 Bedienungsanleitung

Plantronics

Plantronics Audio 355 Bedienungsanleitung

Plantronics

Plantronics VOYAGER 510 Bedienungsanleitung

Plantronics

Plantronics ML18 Bedienungsanleitung

Plantronics

Plantronics M100 Bluetooth Bedienungsanleitung

Plantronics

Plantronics Savi W740-M Bedienungsanleitung

Plantronics

Plantronics Discovery 640E Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung

Southwing

Southwing SA505 Bedienungsanleitung

Blueant

Blueant X5i Bedienungsanleitung