Pleasant hearth VL-WO18D Bedienungsanleitung

VENTED NATURAL

GAS LOGS

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday or

email us at [email protected].

- Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or

any other appliance.

- WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

• Immediately call your gas supplier from a neighbor’s phone. Follow the

gas supplier’s instructions.

• If you cannot reach your gas supplier, call the re department.

- Installation and service must be performed by a qualied installer, service agency or

the gas supplier.

0418GL012S

Complies withANSI Z21.84-

2012, Standard for Manually

lighted, Natural Gas Decorative

GasAppliances for Installation in

Solid-Fuel Burning Fireplaces.

Complies withANSI Z21.60-

2012, Standard for Decorative

GasAppliances for Installation

in Solid-Fuel Burning Fireplaces

when the LPConversion Kit

(SPK100) is installed by a

qualied technician.

80-10-232 - 2018-08-21

WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED

EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY

DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.

CAUTION - FOR YOUR SAFETY

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

This is a gas-re appliance. It uses air (oxygen) from the room in which it is installed. Provisions

for adequate combustion and ventilation air must be provided. Refer to Air For Combustion and

Ventilation of page 7 of this manual.

This appliance is convertible for use with propane/LP gas by using the MANUAL ON/OFF

VALVE/SAFETY PILOT KIT (see ACCESSORIES on page 18).

VL-WO18D / VL-WO24D / VL-WO30D

VL-AA18D / VL-AA24D / VL-AA30D

VL-NO18D / VL-NO24D / VL-NO30D

VL-SA18D / VL-SA24D / VL-SA30D

VL-CA18D / VL-CA24D / VL-CA30D

MODELS

TABLE OF CONTENTS

Specications ...................................................................................................................................2

Important Safety Information ............................................................................................................3

Product Identication........................................................................................................................5

Product Features..............................................................................................................................6

Unpacking.........................................................................................................................................6

Preparing for Installation...................................................................................................................7

Installation ........................................................................................................................................8

Assembling Logs ............................................................................................................................12

Operation........................................................................................................................................15

Care and Maintenance...................................................................................................................17

Accessories....................................................................................................................................18

Troubleshooting..............................................................................................................................19

Replacement Parts.........................................................................................................................21

Warranty.........................................................................................................................................23

Input Rating (BTU/Hr) 45,000 55,000 65,000

Gas Type

Ignition Type Match Match Match

Max. Inlet Pressure

Min. Inlet Pressure

Normal Pressure

(For Purpose of Input Adjustment)

Minimum Vent Opening 8'' Diameter 8'' Diameter 8'' Diameter

ITEM

7'' WC

5.5'' WC

7'' WC

Note: This vented appliance must be installed only in a solid-fuel burning replace with a working

ue and constructed of noncombustible material.

The charts indicate technical information regarding the installation of your gas log set.

Please make sure that all of the specications shown are applicable before installation is attempted.

The replace must include a working ue and venting system with the minimum openings shown

as below.

SPECIFICATIONS

Log Size Minimum Firebox Size

Height

19''

20''

18 in. Vented

24 in. Vented

30 in. Vented

Depth

15''

Front Width

24''*

30''*

36''*

Rear Width

20''

26''

32''

7'' WC

5.5'' WC

7'' WC

5.5'' WC

7'' WC

*Important: If adding a Liquid Propane Conversion Safety Pilot Kit to the burner, 8" needs to

be added to the front width dimension.

VL-WO18D

VL-AA18D

VL-NO18D

VL-SA18D

VL-CA18D

VL-WO24D

VL-AA24D

VL-NO24D

VL-SA24D

VL-CA24D

VL-WO30D

VL-AA30D

VL-NO30D

VL-SA30D

VL-CA30D

SAFETY INFORMATION

IMPORTANT: Read this owner’s manual carefully and completely before trying to assemble, operate,

or service this log set. Improper use of this log set can cause serious injury or death from burns, re,

explosion, electrical shock, and carbon monoxide poisoning.

Only a qualied installer, service agent, or local gas supplier may install and service this product.

WARNING: Do not store or use gasoline or other ammable vapors or liquids in the vicinity

of this or any other appliance.

WARNING: The log set is shipped from the factory adjusted for natural gas use only. Liquid

Propane can only be used after installation of Liquid Propane Conversion Safety Pilot Kit.

CARBON MONOXIDE POISONING: Early signs of carbon monoxide poisoning resemble the u

with headaches, dizziness, or nausea. If you have these signs, the log set may not be working properly.

Get fresh air immediately! Have log set serviced. Some people are more affected by carbon monoxide

than others. These include pregnant women, people with heart or lung disease, people who are

anemic, those under the inuence of alcohol, and those living in high altitudes.

NATURAL AND PROPANE/LP GAS: Natural and Propane/LP gases are odorless. An odor-making

agent is added to the gas. The odor helps you detect a gas leak. However, the odor added to the

gas can fade. Gas may be present even though no odor exists. Make certain you read and under-

stand all warnings. Keep this manual for reference. It is your guide to operating this log set safely.

WARNING:

- Due to high temperatures, locate this appliance out of trafc and away from furniture

and draperies.

- Log set becomes very hot when operating. Keep children and adults away from hot

surfaces to avoid burns or clothing ignition. Log set will remain hot for a time after shut-

off. Allow surfaces to cool before touching.

- Carefully supervise young children when they are in the room with the log set.

- Do not place clothing or other ammable material on or near the appliance. Never place

any objects in the log set.

- Installation and repair should be done by a qualied service person. The appliance

should be inspected before use and at least annually by a professional service person.

More frequent cleaning may be required due to excessive lint from carpeting, bedding

material, etc. It is imperative that control compartments, burners and circulating air pas-

sageways of the appliance be kept clean.

- Any change to this log set or its controls can be dangerous.

- DO NOT OPERATE THIS GAS LOG SET WITH GLASS DOORS CLOSED.

- Do not use any accessories not approved for use with this log set.

- Keep the appliance area clear and free from combustible materials, gasoline, and other

ammable vapors and liquids.

WARNING

This product and the fuels used to operate this product

(liquid propane or natural gas), and the products of

combustion of such fuels, can expose you to chemicals

including benzene, which is known to the State of California

to cause cancer and reproductive harm.

For more information go to www.p65Warnings .ca.gov

SAFETY INFORMATION

1. This appliance is only for use with the type of gas indicated on the rating plate.

Do not place propane/LP supply tank(s) inside any structure. Locate propane/LP supply tank(s) outdoors.

3. If you smell gas

• shut off gas supply

• do not try to light any appliance

• do not touch any electrical switch; do not use any phone in your building

• immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions

• if you cannot reach your gas supplier, call the re department

4. This log set shall not be installed in a bedroom or bathroom.

5. Do not use this log set as a wood-burning log set. Use only the logs provided with the log set.

6. Do not add extra logs or ornaments such as pine cones, vermiculite or rock wool. Using these

added items can cause sooting.

7. This log set is designed to be smokeless. If logs ever appear to smoke, turn off log set and call a

qualied service person. Note: During initial operation, slight smoking could occur due to log curing

and log set burning manufacturing residues.

8. To prevent the creation of soot, follow the instructions in Cleaning and Maintenance, page 17-18.

9. Before using furniture polish, wax, carpet cleaner or similar products, turn log set off. If heated,

the vapors from these products may create a white powder residue within burner box or on adjacent

walls or furniture.

10. This log set needs fresh air ventilation to run properly.

11. Do not run log set

• where ammable liquids or vapors are used or stored.

• under dusty conditions.

12. Do not use this log set to cook food or burn paper or other objects.

13. Never place any objects in the replace or the logs.

14. Do not use log set if any part has been under water. Immediately call a qualied service technician to

inspect the log set and to replace any part of the control system and any gas control which has been

under water.

15. Turn off and unplug log set and let cool before servicing. Only a qualied service person should

service and repair log set.

QUALIFIED INSTALLING AGENCY

Only a qualied agency should install and

replace gas piping, gas utilization equip-

ment or accessories, and repair and equip-

ment servicing. The term "qualied agency"

means any individual, rm, corporation, or

company that either in person or through a

representative is engaged in and is respon-

sible for:

a) Installing, testing, or replacing gas piping or

b)Connecting, installing, testing, repairing, or

servicing equipment; that is experienced in

such work; that is familiar with all precautions

required; and that has complied with all the re-

quirements of the authority having jurisdiction.

PRODUCT IDENTIFICATION

Log Risers

Pilot Bracket Screw (4)

8X3/8PPHTS-B

Burner Inlet

Grate

Burner Clamp*

Burner Manifold

Burner Pan

Cover Plate*

*Uses (4) 8X3/8PPHTS-B Screws

PRODUCT FEATURES

The State of Massachusetts requires that the chimney ue damper, when

used with decorative gas log sets, be welded open or completely removed. In the State of

Massachusetts, this appliance must be installed by a licensed plumber or gastter.

In the State of Massachusetts the gas cock must be a T-handle type. The State of

Massachusetts requires that a exible appliance connector cannot exceed three feet

in length.

LOCAL CODES

Install and use log set with care. Follow all codes. In the absence of local codes, use the

latest edition of The National Fuel Gas Code, ANSI Z223.1, also known as NFPA 54*.

*Available from:

American National Standard Institute, Inc. National Fire Protection Association, Inc.

1430 Broadway 1 Batterymarch Park

New York, NY 10018 Quincy, MA 02269-9101

UNPACKING

1. Remove logs, pan materials, and hardware from carton.

2. Remove all protective packaging applied to logs and base for shipment.

3. Check all items for any shipping damage. If damaged, promptly inform GHP Group, Inc.

at 1-877-447-4768.

CAUTION: Do not remove the metal data plates from the burner pan. The data

plates contain important product information.

Fig. 1

Log Set Size

18" 24" 30"

Chimney

Height*

(ft)

M inimum Opening**

(sq. in.)

10 28.3 35.3 44.2

15 21.2 26.4 32.2

20 18.1 22.1 26.4

25 15.9 18.1 22.1

30 14.5 17.3 20.4

35 13.2 15.9 18.9

40 12.6 15.2 18.1

*Height is from hearth to top of chimney

and the minimum height is 10 feet.

** Chart shows minimum opening (sq. in.)

for a given height and input rate.

Log Set Size

18" 24"30"

Chimney

Height*

(ft)

Minimum Opening**

(sq. in.)

641.7 49.2 56.6

838.7 45.5 52.4

10 35.2 41.7 48.2

15 32.0 37.7 43.2

20 28.8 34.3 39.8

30 26.5 31.2 35.9

*Height is from hearth to top of chimney

and the minimum height is 6 feet.

** Chart shows minimum opening (sq. in.)

for a given height and input rate.

For Masonry Built

Fireplaces Free Opening

Area Of Chimney Damper

For Factory Built

Fireplaces Free Opening

Area Of Chimney Damper

ASSEMBLING LOGS

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts

specically approved with this log set may result in property damage or personal injury.

CAUTION: After installation and periodically thereafter, check to ensure that no yellow ame comes in

contact with any log. With the log set set to High, check to see if yellow ames contact any log. If so,

reposition logs according to the log installation instructions in this manual. Yellow ames contacting

logs will create soot.

It is very important to install the logs exactly

as instructed. Do not modify logs; use only logs

supplied with log set. Each log is marked with a

number, and this number will help you identify

each log during installation.

Provided Logs: 6

1. After optional acces-

sories are installed (see

previous page), slide

both risers onto the

back of the grate. Make

sure the back of the

grate is ush with the

back of the riser.

2. Place log #1 on

the top of the front

grate and make

sure the log is cen-

tered in the grate.

3. Carefully place log

#2 on the top of the

risers. Make sure the

log is centered on top

of the risers.

4. Place log #4 so it is

resting on the top right

of logs #1 and #2.

5. Place log #5 so it

is resting on logs #3

and #2 only.

6. Place log #6 so that it is

resting on logs #1 and #4.

1 2 3 4 5 6

456

Fig. 9 - Installing Risers

3. Place log #3 so it is

resting on the top left

of logs #1 and #2.

Fig. 10 - Installing Log #1 Fig. 11 - Installing Log #2 Fig. 12 - Installing Log #3

Fig. 13 - Installing Log #4 Fig. 14 - Installing Log #5 Fig. 15 - Installing Log #6

NOTE: These log installation instructions are recom-

mended to decrease the amount of sooting the most.

Back of grate

VL-WO18D/VL-WO24D/VL-WO30D/VL-SA18D/VL-SA24D/VL-SA30D

ASSEMBLING LOGS

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts

specically approved with this log set may result in property damage or personal injury.

CAUTION: After installation and periodically thereafter, check to ensure that no yellow ame comes in

contact with any log. With the log set set to High, check to see if yellow ames contact any log. If so,

reposition logs according to the log installation instructions in this manual. Yellow ames contacting

logs will create soot.

It is very important to install the logs exactly

as instructed. Do not modify logs; use only logs

supplied with log set. Each log is marked with a

number, and this number will help you identify

each log during installation.

Provided Logs: 7

1. After optional acces-

sories are installed (see

page 11), slide both

risers onto the back of

the grate. Make sure

the back of the grate is

ush with the back of

the riser.

2. Place logs #1 and

#2 on the top of the

front grate and make

sure the break in

between the two logs

is centered on the

grate and the logs

are touching.

3. Carefully place log

#3 on the top of the

risers. Make sure the

log is centered on top

of the risers.

4. Place log #5 so it is

resting on the back of

log #4 and somewhere

on the break of logs

#1 and #2.

5. Place log #6 so it

is resting on logs #3

and #5 only.

6. Place log #7 so that it is

resting on logs #2 and #3.

1 2 3 4 5 6 7

Fig. 16 - Installing Risers

3. Place log #4 so it is

resting on the top left

of logs #1 and #3. The

long side should be

resting on log #3.

Fig. 17 - Installing Logs

#1-2

Fig. 18 - Installing Log #3 Fig. 19 - Installing Log #4

Fig. 20 - Installing Log #5 Fig. 21 - Installing Log #6 Fig. 22 - Installing Log #7

NOTE: These log installation instructions are recom-

mended to decrease the amount of sooting the most.

Back of grate 1 2

VL-AA18D/VL-NO18D/VL-CA18D

ASSEMBLING LOGS

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts

specically approved with this log set may result in property damage or personal injury.

CAUTION: After installation and periodically thereafter, check to ensure that no yellow ame comes in

contact with any log. With the log set set to High, check to see if yellow ames contact any log. If so,

reposition logs according to the log installation instructions in this manual. Yellow ames contacting

logs will create soot.

It is very important to install the logs exactly

as instructed. Do not modify logs; use only logs

supplied with log set. Each log is marked with a

number, and this number will help you identify

each log during installation.

Provided Logs: 7

1. After optional acces-

sories are installed (see

page 11), slide both

risers onto the back of

the grate. Make sure

the back of the grate is

ush with the back of

the riser.

2. Place log #1

and #2 on the top

of the front grate

and make sure the

break between the

two logs is centered

on the grate and the

logs are touching.

3. Carefully place log

#3 on the top of the

risers. Make sure the

log is centered on top

of the risers.

4. Place log #5 so it is

resting on the top right

of logs #2 and #3.

5. Place log #6 so it

is resting on log #4

and somewhere on

the break of logs #1

and #2.

6. Place log #7 so that it is

resting on logs #1 and #5.

1 2 3 4 5 6 7

Fig. 23 - Installing Risers

3. Place log #4 so it is

resting on the top left

of logs #1 and #3.

Fig. 24 - Installing Logs

#1-#2

Fig. 25 - Installing Log #3 Fig. 26 - Installing Log #4

Fig. 27 - Installing Log #5 Fig. 28 - Installing Log #6 Fig. 29 - Installing Log #7

NOTE: These log installation instructions are recom-

mended to decrease the amount of sooting the most.

Back of grate

VL-AA24D/VL-AA30D/VL-NO24D/VL-NO30D/VL-CA24D/VL-CA30D

1 2 34

567

Andere Handbücher für VL-WO18D

Dieses Handbuch passt für folgende Modelle

Andere pleasant hearth Kaminzubehör Handbücher

pleasant hearth

pleasant hearth BG7-215M Bedienungsanleitung

pleasant hearth

pleasant hearth 18-45-66 Bedienungsanleitung

pleasant hearth

pleasant hearth VFL3-VO24DR Bedienungsanleitung

pleasant hearth

pleasant hearth LS932B Bedienungsanleitung

pleasant hearth

pleasant hearth FA092LB Bedienungsanleitung

pleasant hearth

pleasant hearth LS938-96SC Bedienungsanleitung

pleasant hearth

pleasant hearth OFW110R Bedienungsanleitung

pleasant hearth

pleasant hearth FA338LT Bedienungsanleitung

pleasant hearth

pleasant hearth FA328S Bedienungsanleitung

pleasant hearth

pleasant hearth LI-24 Montageanleitung

pleasant hearth

pleasant hearth L-24 Montageanleitung

pleasant hearth

pleasant hearth SELENE FA989SA Bedienungsanleitung

pleasant hearth

pleasant hearth SELENE FA989SA Bedienungsanleitung

pleasant hearth

pleasant hearth OFW815FR Bedienungsanleitung

pleasant hearth

pleasant hearth OFC672S Bedienungsanleitung

pleasant hearth

pleasant hearth 23-894-213 Bedienungsanleitung

pleasant hearth

pleasant hearth SPK200 Bedienungsanleitung

pleasant hearth

pleasant hearth LK-24 Bedienungsanleitung

pleasant hearth

pleasant hearth FA995TC Bedienungsanleitung

pleasant hearth

pleasant hearth FA990SA Bedienungsanleitung

pleasant hearth

pleasant hearth FA245S Bedienungsanleitung

pleasant hearth

pleasant hearth FA104TLA Bedienungsanleitung

pleasant hearth

pleasant hearth FA016LA Bedienungsanleitung

pleasant hearth

pleasant hearth FA617S Bedienungsanleitung

Beliebte Kaminzubehör Handbücher anderer Marken

Valor

Valor L2 1700K Bedienungsanleitung

Exodraft

Exodraft Xzense Bedienungsanleitung

Whalen

Whalen Ruso MNFP62BF23-6 Bedienungsanleitung

Lopi

Lopi Hearthview 864 Bedienungsanleitung

Woodstock Soapstone

Woodstock Soapstone Fireview 201 Bedienungsanleitung

EdilKamin

EdilKamin SERBATOIO 250 Kurzanleitung

Bronpi

Bronpi KIT-1 Bedienungsanleitung

Town & Country Fireplaces

Town & Country Fireplaces 22150051 Bedienungsanleitung

Travis Industries

Travis Industries 33 DVI Bedienungsanleitung

Superior

Superior ASD3628-TI Bedienungsanleitung

IHP

IHP Astria Series Bedienungsanleitung

Firegear

Firegear FG-H-2110SS Bedienungsanleitung

Nibe

Nibe Contura C i31 Bedienungsanleitung

kozy heat

kozy heat KZK-052 Bedienungsanleitung

SimpliFire

SimpliFire SF-WM36 Bedienungsanleitung

Bluegrass Living

Bluegrass Living BC18NR Kurzanleitung

Cooke

Cooke Glass Wind Guard Bedienungsanleitung

Solas

Solas TWENTY6 SL-26N Bedienungsanleitung

pleasant hearth VL-WO18D Bedienungsanleitung

Beliebte Kaminzubehör Handbücher anderer Marken