PLK Technologies Optian Bedienungsanleitung
1
ADAS Cam - OPTIAN8
Copyright and Trademark/ PLK technologies Co., Ltd.
This manual is under the protection of copyright law and all the rights are legally protected.
It is restricted to copy, modify or translate this manual without any prior consent.
『ADAS』or Advanced Driver Assistance System is an advanced safety assist system that can
help a driver to avoid or mitigate accidental collisions.
* ADAS functions are designed to assist the driver, however, it is not a substitute for careful driving and we take no
responsibility for any damage caused by careless driving .
2
5. System Start
6. Menu Guide
7. Data Manager Program
8. Maintenance
•Booting Up
•Screen Menus
•Basic Menu
•ADAS Setup
•DVR
•Install Method
•Screen Menus
•Micro SD Card Maintenance
•Troubleshooting
10. Appendix
•Certificate
•Specification
•Warranty
Contents
1. Safety Caution
•Warning
•Caution
2. Accessories & Functions
3. Product Installation
4. Main Functions
•Basic / Option
•Main Body
•HUB and Pin map
•Secondary(extra) Camera
•Precautions
•Main Body Install
•Secondary Camera
•FCDA
•PCW
•DVR
•Video Playback
•Configurations
•Vehicle Settings
9. Optional Devices
•Extra Display
•Vibrator
•Main Buttons
•LDW
•FCW
•SDA
•VB
3
! [Warning !]
Severe injuries or damages can be caused if user does not follow instructions.
! Do not use modified power-supply cables ,
use only genuine products supplied by the
manufacturer . Modification may cause vehicle
damage or physical injury due to explosion or
fire.
! Apply only the rated voltage otherwise it may
cause vehicle damage or physical injury due to
explosion or fire.
! Separate the power cable when not using for a
long period of time. Otherwise it may cause
battery discharge or fire. User is responsible for
the damage in this case.
! Do not install the product in a location where
it interferes with driver's vision.
! Do not change settings while driving as it may
cause traffic accident.
! Do not separate or insert the power cable with
wet hands as it may cause electric shock.
! Keep product accessories away from children
to prevent children from swallowing small
accessories which may cause severe injury.
! Avoid installing in places with high humidity
or inflammable gas as it may cause explosion or
fire.
! Do not place the product in enclosed vehicle
or expose to heat stress for a long period of
time as it may cause fire or malfunctions.
Safety Caution
4
! [Caution!]
If user does not comply with manual instructions, it may cause injuries or property
damages.
! Do not connect cable wires randomly as it may
cause product or vehicle damages. Connect
vehicle wires under the guidance of
professional installing technician.
! Install the product when parked on the flat
ground. Carefully read manual instructions
prior to installation.
! Do not use force to adjust lens as it may cause
product damage.
! Do not press the LCD display with sharp
objects as it may damage the LCD surface or
touch panel.
! Use only tested and approved Micro SD Card
from the manufacturer to avoid product
damages.
! Do not remove SD card when the product is
operating as it may cause product damage.
Only remove the Micro SD card when the
product is powered off completely.
! Remove and Keep Micro SD card with care to
protect recorded accident data. Important data
may be overwritten by new video data.
! Micro SD card is a consumable product. Errors
may occur if used for long periods. It is
recommended to format data regularly for
maintenance and replace the SD card if it is
unable to restore card damages
! Do not separate product cable while operating
as it may cause product or Micro SD card
damage.
! Video data cannot be recorded if power is OFF
or Micro SD card is broken . Check SD card
status prior to its operation.
5
! [Caution!]
If user does not comply with manual instructions, it may cause injuries or property
damages.
! ADAS functions are designed to assist the
driver, however, it is not a substitute for careful
driving and we take no responsibility for any
damage caused by careless driving . In the
following conditions , ADAS functions may not
perform properly.
•Extreme weather
•Extremely curved roads
•Roads without painted lane markings
•When the camera image is compromised due
to reflected light from an object on the
dashboard
•When installed incorrectly
•When settings are changed improperly
•When the calibration is incorrect
! ADAS functions only work when the speed
rate received from GPS is over the set
operating speed threshold. If the speed data
cannot be received properly, it may cause ADAS
malfunctions.
! Tinted windscreens will affect the brightness
and definition of recorded videos. Windscreen
metallic films may cause GPS signal loss.
! Keep the camera lens and windscreen clean to
ensure clear video recording and proper ADAS
functions
! Camera lens calibration can be affected by
excessive impacts such as driving over speed
bump or collisions. The affected camera angle
can cause ADAS performance degradation.
! Do not disassemble or modify main body
randomly as it will result in data loss, damage
and will void the warranty cover.
6
[Basic]
Main
Body
A Type :
Mini USB-Cigar Jack
Micro-SD
Card(32GB)
•The specifications of above accessories are subject to change without a prior notice.
•The above images are for user's understanding; actual accessories may look a little
different .
OLED Display
[Optional]
Vibrator
Basic and Optional Accessories
HUB
Secondary
Camera
6p Mount
WIFI dongle
C Type : 10pin, 1.5M,
Hub –Vehicle Wire
SD Card
(32-128GB) External GPS
B Type : 10pin-Vehicle Wire 7
[Main Body]
Touch LCD
Bracket
Power Port(Mini-USB type)
Micro SD카드 소켓
Front Camera (FHD)
Secondary Camera ø 2.5
External GPS ø 3.5
USB Port
(External WiFi Connection)
Micro-SD Card socket
Volume Adjustment
Recording Button
8
[HUB and Connection Pin map]
Optional Connection
•Display and vibrator can be connected to Hub
Main Body Vehicle
①②
Display Vibrator
Comm
③④⑤①Main Body ②Vehicle ③Display ④Comm ⑤Vibrator
Product ↔
Hub Cable
Hub ↔
Vehicle Cable
Display
Module
External
Communication
Port
(RS232 or TTL)
Vibrator
•To activate parking mode[CCTV], it is necessary to connect wires to ACC and B+ .
•If there is no need for parking mode[CCTV], connect twisted ACC and B+ wires to ACC only.
•B+, WIPER, Speed are optional connections.
No. Signal Cable Color
1 B+ RED
2 ACC(IG) White
11 GND BLACK
•B Type_main body to vehicle connection Pin out •C Type Dual HUB to vehicle connection Pin out
No. Signal Cable Color
1 ACC(IG) RED
2 B+ VIOLET
3 BRAKE BROWN
4 WIPER GREEN
7 TURN_R YELLOW
8 TURN_R WHITE
9 SPEED BLUE
10 GND BLACK
9
[Secondary Camera]
•The specific installation location of Secondary Camera can be set by the user.
•A 5m power cable is provided.
Integral Bracket DC Power
Port
DC Power Cable
10
Andere Handbücher für Optian
1
Inhaltsverzeichnis
Andere PLK Technologies Dashcam Handbücher
